And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Way to go!
Mines got the most pics :D ! JR -
Very cool resource Syph. Good for new and old customers alike.
-
That's some great custom SAK viewing Syph. Good job organizing all that. I like the idea of the "build your own" feature and submitting for a quote

-
This one seemed straight forward but I hit a bunch of snags on the way. Pliers are harder to add than scissors since they stick up higher and can block nail nicks. In the middle this blocked other tools, and pliers on the outer layer are difficult as the plier jaw rivet sticks out and will hit the scale.
You cant tell from the pics but here are the tweaks I did to get it all to work.
- ground plier head rivet to clear scale
- ground rests of plier back spring to allow plier head to sit as low as possible
- ground rest of saw backspring to lower saw as it was too high.
- surface ground 2x opener layers springs from 0.080" to 0.055" to use as the phillips backspring
But.. It all works just fine and the pliers open and close without hitting the scale at all.







-
Nice improv work there Syph
Looks good as always. -
You are truely master. salute sir.
Sent from my HTC One X using Tapatalk
-
Really nice
I like this green HA color a lot. Definitively the color to ask for in my next custom to be done in the near future you (just need a couple of more items). -
Another beauty Syph as always!
JR -
I was playing with a 1/2 inch endmill today to see if that works for making nail nicks. I think it did a decent enough job.








-
Awesome! :ahhh
At first I saw you cutting the blade in half and was just thinking WTF is he doing. :D
-
@captain spaulding said:
Awesome! :ahhh
At first I saw you cutting the blade in half and was just thinking WTF is he doing. :D
Really! I was like WHAT, is he nuts? But then saw the finished part and was like phew! That's good! JR
Ya i have some used blades that arent perfect so I was just experimenting. :D
-
@captain spaulding said:
Awesome! :ahhh
At first I saw you cutting the blade in half and was just thinking WTF is he doing. :D
Really! I was like WHAT, is he nuts? But then saw the finished part and was like phew! That's good! JR
Ya i have some used blades that arent perfect so I was just experimenting. :D
Well it turned out great, another awesome job!
if it's one thing I don't get tired of it's you and any of your work you post, truly amazing!! JR -
Wow, that is brilliant. A toast to your ingenuity

-
@captain spaulding said:
Awesome! :ahhh
At first I saw you cutting the blade in half and was just thinking WTF is he doing. :D
Really! I was like WHAT, is he nuts? But then saw the finished part and was like phew! That's good! JR
Ya i have some used blades that arent perfect so I was just experimenting. :D
Well it turned out great, another awesome job!
if it's one thing I don't get tired of it's you and any of your work you post, truly amazing!! JRCompletely agree.

-
Robert,
I love what you did with this "chopped" knife blade - literally making an electrician look-alike blade. I can see how this can be applied to blade with broken tips, and/or mixing with other short tools on the same layer (with appropriate washers/spacers).
-
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Great representation of your fine work Sir. Some wonderful photos there

+1

-
Great idea, and it turned out excellent. That would make a perfect detail knife. One of the best features of 91mm SAK's (IMHO) is the handle to small blade ratio for precise cutting, but that is even better.


-
@twiliter said:
Great idea, and it turned out excellent. That would make a perfect detail knife. One of the best features of 91mm SAK's (IMHO) is the handle to small blade ratio for precise cutting, but that is even better.
Ya it got me thinking it might be fun to recreate the classic 3 bladed stockman pattern on a Vic with the 3 blade shapes just for fun.
-
Great idea, and it turned out excellent. That would make a perfect detail knife. One of the best features of 91mm SAK's (IMHO) is the handle to small blade ratio for precise cutting, but that is even better.

Ya it got me thinking it might be fun to recreate the classic 3 bladed stockman pattern on a Vic with the 3 blade shapes just for fun.
So many guys carried those back in the day, even now I still see a few. A Vic version would be cool! :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login