Opinel Electrician
-
@Mike, Lord of the Spammers! said:
It's worth a go. Maybe you could set up a petition???Sent from my Nexus 7 using Tapatalk
I have sent an email to them asking them nicely if they could make a PE version. It probably wont work, but its worth a try. Especially if they get many emails asking for the same thing.
Time will show if I get an answer.
Sent from a device made from star dust using tapatalk
-
Did you sent it in French?
-
Yep, MTO, BF etc. members are really a very small part of target audience.
I know several people that are keen to have a saw style edge, as they feel it cuts some materials better.The funny thing is, serrations DO do a great job on fibrous materials, Vic serrated blades for example are very good at rope cutting.
BUT, the funny thing about the opinel is the serrations are so poorly done they cut really badly. There is a youtube review video and they show how badly it performs in that task. So... fail.
See there I kinda like the idea of the whistle (assuming it's a good whistle) but I can't do the partial serrations, be they good or bad ones.
-
@kkokkolis said:
Did you sent it in French?No. I sent it in english from their english customer service site.
Sent from a device made from star dust using tapatalk
-
...
There seems to be a MASSIVE disconnect between manufactures of combo edge blades and the target audience. Every poll or discussion on the topic I have ever seen conclude they would prefer a PE over CE, so what would they make a CE? Better to make a dual blade openel with one blade being the saw blade.Actually that's what puzzles me. We seem to be on the same page on most of these discussions on various forums, most people prefer PE. But I remember from a SHOT show video a year or two ago a Benchmade representative saying that the combo edged blades were their biggest seller.

It is my observation that those (like folks on this forum) who are willing sharpen their blades and able to do so properly generally prefer PE blades, since (1) a sharp PE will outperform a sharp SE for most tasks, and (2) sharpening serrations is a PITA. However, for those (a majority of users?) who can't, won't, or don't sharpen their blades, a SE makes some sense, since a dull SE will outperform a dull PE due to the fact that some ripping/tearing/shearing action is achieved by even dull serrations.
-
Ah, since they have an English customer service they might have someone who speaks English. I know, it sounds obvious but with French people it isn't always.
-
@kkokkolis said:
Ah, since they have an English customer service they might have someone who speaks English. I know, it sounds obvious but with French people it isn't always.Oui! >:D
-
Well I impulse ordered a yellow electrician. Cheap enough to gamble on it was $36 shipped.
-
-
Didnt have time to try it much as I'm just heading out, but I had to put up some teaser pics.
The only comments I have from 5 minutes of looking at it are,
- the bits seem like they will fall out of handle easy, only held in by friction.
- the bits are held well in the end by a magnet.
- the driver is very uncomfortable on palm when in screwdriver mode.
- I would have prefered a sheepsfoot blade, dont care for this shape.
- Blade notches seem fine
- The blade on the back side looks weird with the hump part in the middle.
- I like the yellow handle! Not a fan of wood so Id like this over wood on a standard opinel.










-
Sweet! Looks good.
live from Nate's mobile
-
Ok after playing with this a bit more, the bits actually retain VERY well if you give them a good push. But, the problem then becomes they are impossible to get out. I had to use my sak to free them. What it needs is those little plastic grooves removed and a magnet embedded in the plastic under the bits on each side.
I do like this opinel though. The action on this is much smoother than the other 2 I have that are wood handles. I think the plastic is just smoother than wood on metal, but I like the feel of how it opens.
What I think I like the most of this opinel though is modding potential, it can take a standard opinel no9 blade. So Id like to do that, then slot in some firesteel somewhere. This to me has more pentental for an outdoor knife then the official outdoor knife. Nice an light too and I really like the yellow color. For outdoor knives I dont like natural materials like wood or leather as they swell when wet, so for me in this case the plastic is an upgrade from wood.
Oh actually this would work well with some beaded chain as a neckknife. I like that idea as my typical neckknife combos are a blade and firesteel, so this could work very nicely.
-
It looks good!
I wish they would make a plastic handle version of their normal opies though. That would be great for outdoor and work use.
I have a No7 I used on a rainy day hike and the handle started swelling to the point that I needed pliers to open the blade when I got home :(Sent from a device made from star dust using tapatalk
-
Looking good.

How thick is the spine of the blade?
The normal Opies don't have thick blades and while it makes them excellent slicers, I'd still like something with a bit thicker stock for hard work. I can understand them strengthening the blade at the notches but I'd have preferred it with just the bottom notch and more actual blade.

-
How thick is the spine of the blade?
The normal Opies don't have thick blades and while it makes them excellent slicers, I'd still like something with a bit thicker stock for hard work. I can understand them strengthening the blade at the notches but I'd have preferred it with just the bottom notch and more actual blade.

I would bet its just a normal no9 blade. I only have an 8 and 10 to compare it to. Its thicker than the 8 but not as thick as the 10. It looks just like a re-profiled no9 blank to me, so thats my guess.
-
I wonder if the bits are going to go south on you once you have removed and replaced them a few times. Personally, I would like to see this 'type' done in plastic handle, gardener's blade, w/o serrations.
-
The new blade shape seems very strong indeed.
If I wasnt allowed to carry a locking knife and I had to use an Opinel, I sure would use a rubber band to keep it closed. As these knifes age and dry out they become looser and looser.
Here are some nice users I just aquired
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


looks like you could grind them to make a finger choil