Any love for Wenger?
-
Here are some Wenger I own.I stated in another post that I don't know the names of these with the exception of the toolchest.
-
@toolguy said:
Here are some Wenger I own.I stated in another post that I don't know the names of these with the exception of the toolchest.Cant's see all the tools of your knives.
However, judging from the pictures, I would say:
Ranger on top, assuming it has a phillips driver, is Sabla 08.
Model on the left, assuming it has phillips driver, is a Monarch.
Model in the middle, Toolchest plus.
Model on the right, assuming it has corkscrew, is a Nomad. -
After my current projects are done I'm going to build a unique wenger model not seen before. Just a FYI :)
-
@basilio said:
Cant's see all the tools of your knives.
However, judging from the pictures, I would say:
Ranger on top, assuming it has a phillips driver, is Sabla 08.
Model on the left, assuming it has phillips driver, is a Monarch.
Model in the middle, Toolchest plus.
Model on the right, assuming it has corkscrew, is a Nomad.Thanks so much for that information.I've written it down and placed it in my tool chest.
-
@toolguy said:
Thanks so much for that information.I've written it down and placed it in my tool chest.No problems, I hope I was correct on id your knives.
This is an interesting Wenger I recently bought.
I would call it a sub-variant of model 1.92.73 (see the Survivor wiki page for more informations).
I only saw this knife listed on japan websites (but with the same catalog number as the standard scale model) and when I made an order from Japan some time ago, I bought one.
Unfortunately, what I received was a standard 1.92.73, without the cyclist imprint.
So I thought that the picture of this knife with the cyclist imprint was just a catalog error.
This was untill I found this knife.
Now you may ask: what if the front scale was later replaced, adding the one from the more common cyclist model?
The last attached picture answer this question: as far as I know, the knife here is the only one to feature a front scale with the cyclist imprint <u>and</u> the provision for the tweezers.
In short my personal conclusion is (unless someone had different informations): the knife here was a "variation" of model 1.92.73 made only for the Japan market.


-
What is that gray tool that looks to be a tube with a tapered end and a cut in its shaft?
-
-
What is that gray tool that looks to be a tube with a tapered end and a cut in its shaft?
A whistle. :whistle:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
@basilio said:
Here is an additional unusual one.
I believe this is the "Pathfinder II" (16926).
Note the old 5-turns corkscrew and the missing patent marking on the cap lifter.
A more recent one (with the "4 turns" corkscrew) just sold on ebay.com today.Hi
Very nice knife! I wonder if this is a 1979 SAK? -
Thanks so much for that information.I've written it down and placed it in my tool chest.
No problems, I hope I was correct on id your knives.
This is an interesting Wenger I recently bought.
I would call it a sub-variant of model 1.92.73 (see the Survivor wiki page for more informations).
I only saw this knife listed on japan websites (but with the same catalog number as the standard scale model) and when I made an order from Japan some time ago, I bought one.
Unfortunately, what I received was a standard 1.92.73, without the cyclist imprint.
So I thought that the picture of this knife with the cyclist imprint was just a catalog error.
This was untill I found this knife.
Now you may ask: what if the front scale was later replaced, adding the one from the more common cyclist model?
The last attached picture answer this question: as far as I know, the knife here is the only one to feature a front scale with the cyclist imprint <u>and</u> the provision for the tweezers.
In short my personal conclusion is (unless someone had different informations): the knife here was a "variation" of model 1.92.73 made only for the Japan market.I believe you are correct and it is made for that market. If it got the "liner attaching" scale then you can try to see and compare with other ones. If somebody did this private then it would show.
-
@North Man said:
Hi
Very nice knife! I wonder if this is a 1979 SAK?Hey North Man!
I think the same.
This knife is also shown on page 9 of the 1982 catalog (on top).
The image there seems to have the more recent corkscrew.
However, in the same catalog there are also pictures of knives with the older type.
Do you have an idea about when the change in the corkscrew did happen?@North Man said:
I believe you are correct and it is made for that market. If it got the "liner attaching" scale then you can try to see and compare with other ones. If somebody did this private then it would show.No, I don't think it was modded.
They would had to cut the space for the tweezers on the liner, and on my example I am 100% sure it was factory made.
Here is an example of one of the stock catalog picture I was talking about

-
yes it must be 100% real
Nice find! -
Hi
Very nice knife! I wonder if this is a 1979 SAK?Hey North Man!
I think the same.
This knife is also shown on page 9 of the 1982 catalog (on top).
The image there seems to have the more recent corkscrew.
However, in the same catalog there are also pictures of knives with the older type.
Do you have an idea about when the change in the corkscrew did happen?@North Man said:
I believe you are correct and it is made for that market. If it got the "liner attaching" scale then you can try to see and compare with other ones. If somebody did this private then it would show.No, I don't think it was modded.
They would had to cut the space for the tweezers on the liner, and on my example I am 100% sure it was factory made.
Here is an example of one of the stock catalog picture I was talking about

It is difficult to 100% on the corkscrew change but i would say late 70s. On knives from 1977 the extra loop was on. Maybe it started in 1978 and by 1981 most of the knives got the New Style corkscrew.

-
Nice to see you again, North Man.

Thanks for the info on the corkscrew. I think I asked about it some time ago but never got a definitive answer.

-
Hi
You are all welcome
-
I have several Wengers coming in soon (in addition to the ones already in stock in the store http://www.edcsource.com/FELINEVET-SWISS-ARMY-KNIFE-STORE,name,100015,user_id,shop:
-
Matterhorn
-
Tradesman
-
EvoWood S557
-
Ranger 178
-
Clipper
-
Pocket Tool Chest
-
Blackout EvoGrip 10
-
Evo S557
-
EvoGrip 18
-
Evo S18
-
-
(Repost from Latest SAK)
Here's an interesting Wenger. Its a rare version of the Backpacker/Classic 13, with a flat phillips sd in place of the nail file. Its number is 1.13.23. Names in my notes include Classic 13 and Mountain (a generic series term). Probably will call it a Classic 13 variant. Even more interesting in the logo. In place of the Wenger Swiss Cross, there's an outline of Saudi Arabia bordered by the Red Sea and Persian Gulf. Three dots probably represent Ad Damman, Riyadh, and Mecca. Suspect this is the Wenger version of the 'V & globe' logo used by Victorinox for sale in Saudi Arabia.
-
@ColoSwiss said:
Suspect this is the Wenger version of the 'V & globe' logo used by Victorinox for sale in Saudi Arabia.Interesting find, congratulations!
I have seen at least two Wengers (1.28.03/champ) with a Turkish flag instead of the cross on the shield.
So I think that Wenger made probably some specific no-cross variants for single states.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


