Juice S2 (pre 2014 model) pliers close-up problem
-
Just got a new Juice S2 while I can still get the old model to replace a Juice S2 I lost somewhere in my roofspace insulation a year or two ago.
When closing-up the pliers (with the jaws apart) one jaw jams between the small and large drivers. Pre-closing the jaws avoids this but I have never previously had to pre-close multi-tool pliers. There is no obvious distortion but it is obvious from the pic that the jam is always likely to happen. Anybody else had this problem? Is the driver bevel correct?
I really want the urban EDC convenience of the Juice over my Rebar and Wingman, but not this "defect". It's going back for replacement but is this a design or a quality issue?
-
IMHO this is not normal, but quite usually for Juices :(
Just close pliers to side with philips screwdriver first ;) -
None of mine have done that. The pliers are supposed to rest on just the small driver I think.
-
More than 100 juices comes through my hands and ~5-10 of them has this problem (pliers jammed between flat screwdrivers).
I think it's production defect but not such critical. Already I got used to close all my juices to philips screwdriver side first ;) -
Mine do it. Design flaw, says me.
-
Yep mine too, hate it !
Sak's rule !
-
Mine S2 does the same. I hate it to. That side is also looser so it´s get stuck every time. It seems like if the flatheaddrivers were just 1mm longer the plierhead could rest on them and it woudn´t happend.
-
I think it's a design flaw, but with that said only a portion of them have this problem. I have noticed the same thing on the Fuse when you have one the smaller flat driver deployed.
-
I have S2, C2 and CS4 and none of them do it... just sayin

-
Thanks for the feedback folks. I think I conclude fundamentally its poor design and the problem becomes evident on a small number of products due to tolerance build-up. I don't recall this happening with my previous S2. I'm certain I would have noticed.
IMO the small driver is unnecessarily short and over bevelled but the main tolerance problems are joint friction and when the plier jaws open a few degrees to far. For a light duty tool it would be no great loss if the jaw opening was a few degrees less.
This from Chako's recent post...
They in fact changed how one access these tools that reside in one of the handles. Not sure why they decided to make it all even as seen in the above photo.
Note the extended small driver.
Here's mine. (hlp pls how do I get an in-line picture?)
A longer driver, less bevelled, and/or the small and medium drivers bevelled on the other side would have been a better improvement than fancy scales. Sorry I digress.
For me the Juice is an ideal nanny UK urban EDC with its legal knife and absence of pointy bits. A replacement is on its way, I'll keep the best one and return the biggest lemon. If necessary I think the small driver can be bent a shade, a flat filed on the jaw radius and the plier opening constrained. Or (later edit) as has been suggested modify the close-up procedure.
But I won't be acquiring a 2014 Juice with its "Dukes of Hazard" doors.


-
Hmmmm, the few I've handled have done that also. However, so has my Charge and a couple of Waves. I have a rather odd way of closing my LMs now though, and don't let the pliers sit into the handle while I start to close them.
-
I got a used Juice S2 today. When I close it, the pliers don't "hit" the rest of the tools but the jaws open slightly, which causes the tool to not close fully.
This happens even if I close one of the handles first and press the plier's jaws toghether as i close the other handle.

You can see the tips of the jaws in the pic, the two bright spots in the red circle.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
