Juice Club
-
-
Thanks! :D Bmot also confirms that, I think... :D
-
Nice Juice NNR...liking the color!
-
Thanks! :)
Ok, the S2 will be in my hands tomorrow... :D Unfortunately, it will be gray. sigh.
I must say, though, I'm mildly disappointed by the xE6. I did want to have a juice and moreover a nice colour, but the scissors' play annoys me. Well, if that's what it is with all Juices, fine... but still. Also, when you pull up the corkscrew, it pushes up the bottle opener. Originally I thought that this was smart, as the bottle opener is used WITH the corkscrew to open bottles. So, instead of pulling out two tools with your fingernails, you pull the corkscrew, which in its turn opens the bottle opener. But...no. The corkscrew does not pull UP the whole bottle opener and instead the two of them get "stuck together". So if the corkscrew is pulled up and ready to use, the bottle opener is stuck half way up. So you still have to open first the bottle pener and then the corkscrew.
Also, the fact that, at times, when closing the tool, half of the plier head gets stuck in the handle with the flat heads and this way the tool cannot be closed is very annoying. I must always be careful how I "fold" the tool and which side goes first in the handle. Doesnt happen often, but happens. Thank God I don't use pliers often.
The tool closes very well and with a snap when you close it... "forcefully". But if, from a closed position, you just pull away the two parts on the side of the lanyard, without opening the tool, the tool doesn't close, but remains slightly apart... and I have to fold it in pressing it with my fingers.
Also, when the tool is closed, fully folded & all, and I have it my hand and squeeze it with my whole strength, something somewhere flexes.... which I don't like. I'm a woman after all and not that strong, I assume.
So, of course, it's a very pretty tool and I did want it. But for twice the money of my Wingman, I think the Wingman is closer to Leatherman quality than the Juice... Of course, I haven't even tested all the tools yet, so these are just my original impressions. And I like the versatility that it provides. And the colour and form factor. But still, there are lots of thins that drive me nuts and make me feel kinda disappointed... feeling that I didn't have with any of the key chain tools I had or the Wingman.
I hope the S2 will return my faith in the Juice line tomorrow, lol.
-
Sorry you're a bit disappointed with the XE6 :( I used to have one, but sold it. Not due to any of the problems you seem to be having, as mine was fine (maybe had the scissor play, which seems to be common anyway, but I don't remember). It just seemed like too much in a smaller sized MT, and I just didn't end up carrying it much after the newness wore off.
I hope you have a better first impression with your S2
You will have to open up the opener combo tool to deploy the scissors though, which is a little annoying, but I don't find it to be a big deal. Other than that, as long as you don't get one with the stiff and difficult to deploy drivers, you should be all set. I don't have that problem with either of my Juices (S2 and KF4), but it does seem to be fairly common to many here.My KF4 is my favorite due to its more symmetrical design, and nice size, while still providing a great tool loadout overall. However, it does lack scissors, which hurts it IMO. I would rather have the scissors in place of the serrated blade to make it a more "complete" package for me. It doesn't have the opener combo tool either, but I rarely would use that anyway.
Anyway, sorry for my rambling. I do hope the S2 works out better for you, and I look forward to your thoughts on it :)
-
Thanks :) Yeah, I do hope I'll like the S2 better. ANd yes, I realized bit later that I have to deploy the opener first and then the scissors. That's why I thought the Juice xE6 scissors would be superior.
Anyway, I can't wait for the S2

-
@N_N_R said:
Also, the fact that, at times, when closing the tool, half of the plier head gets stuck in the handle with the flat heads and this way the tool cannot be closed is very annoying. I must always be careful how I "fold" the tool and which side goes first in the handle. Doesnt happen often, but happens. Thank God I don't use pliers often.My replacement (Grey) S2 arrived. The plier closing is marginally better but I think if I forced it the jaw would slip off the driver, at which point if forced hard enough its possible it would no longer look "better".
I'm keeping the second one and returning the first one. It's being returned as "faulty" but is visually unused. Actually the driver is marked but might not be spotted if the plier was jammed first before inspection. Does somebody else get it or what? Can't be so many pre-2014 models left. Maybe that is the problem?
Fundamentally its poor design. Even poorer that LM appeared to never address the issue in all the years. Perhaps until now, look at Chako's CS4 comparison photographs and the centre driver has been extended providing a wider landing for the plier jaw. Really hate the 2014 Juice. Won't be acquiring it. If I wanted a shorter rounder knife I could grind down what I have.
I'm keeping the S2 because its genuinely UK legal EDC and the pliers are loads better than anything a SAK can deploy. I'm going to file a flat on the jaw radius at the tip. Another mitigation might be to slightly restrict the maximum jaw opening. Maybe try a dab of epoxy. At the price for the Juice range shouldn't have to work around this issue.
BTW both scissors display much less slack than shown in N_N_R's vid.
In the first picture its obvious which one is "better". The second picture shows the "better" one nose on. Its easy to see the potential problem.


-
Sorry your disappointed N_N_R :-\ I'm carrying my xe6 today,my only complaint is the tin opener ,it might grow on you as the juices have with me

-
Thanks, Zed :)
Today I got the S2, too! I must say I'm in love with it! The scissors have NO play whatsoever, they feel a lot tougher than the Xe6. The whole tool feels a lot... stiffer & tougher and stronger.
At some point, I guess, if I don't sell the Xe6, I'll just send it to LM... who knows. For the time being I'll be comparing both.
The S2 also came with a leather sheath, so I guess I could put the Xe6 in it and carry it on my belt while having the S2 in my pocket or sth. (you can never have too many LMs on you, right? :D)
-
Have to say the xe6 I've got here is the same as my s2 ,I pair the s2 with my champ in my backpack or xe6 when I want all tools :D
-
Glad to hear you are happy with your S2

-
Today I got the S2, too! I must say I'm in love with it! The scissors have NO play whatsoever, they feel a lot tougher than the Xe6. The whole tool feels a lot... stiffer & tougher and stronger.
At some point, I guess, if I don't sell the Xe6, I'll just send it to LM... who knows. For the time being I'll be comparing both.
The S2 also came with a leather sheath, so I guess I could put the Xe6 in it and carry it on my belt while having the S2 in my pocket or sth. (you can never have too many LMs on you, right? :D)
Rhetorical in nature I'm sure but the answer is NO you can never have too many MTs on you.
SO glad you got the S2 in and it's what you expected! I feel the S2 is a great little MT all on its own or paired with a SAK or another MT. The size on these Juice models is surprising ( small ) but they are very capable. Soooo NNR now that you have what 4 LM's, what's next
. -
Thanks guys! :D :D
@Aloha,
What's next? Well, my paycheque should be next first :D:DBtw, last week I had contacted LM because I received one suspicious... "brand new" PS4 from a local dealer. So I asked them if a tool with such minor, but existing flaws, could really be NEW. They replied last night and told me I could send the tool in for exchange. O_0. I won't do that, the tools function perfectly.
BUT. I shot a short video showing them the scissors play of the Xe6 and mailed it. I wonder what they'll say about THAT.
Another BUT. - what if they suggest thta I send the Juice in... and what if I do send it... and what if they do not repair the scissors, but decide to send me a brand new tool. Sounds great, doesn't it? BUT what if they send me from the NEW Juice line i.e. that half-painted pale yellow thing?? :ahhhI guess I'd better not bother until something on the tool really breaks.
P.P. I have FIVE tools
Micra, PS4, Juice Xe6, S2, Wingman :D -
@N_N_R said:
Another BUT. - what if they suggest thta I send the Juice in... and what if I do send it... and what if they do not repair the scissors, but decide to send me a brand new tool. Sounds great, doesn't it? BUT what if they send me from the NEW Juice line i.e. that half-painted pale yellow thing?? :ahhhI guess I'd better not bother until something on the tool really breaks.
Good point. I don't want the new Juice under any circumstances. I've "improved" mine by filing a flat on the plier and it now reliably slides up the driver when closing.
But... the cutters wouldn't even cut cable-ties as supplied, they just jammed the jaws together but my diminutive Style PS chomps through easily. I've dressed the Juice cutters with a diamond file and its now chomping away.
To be fair the Juice hard wire-cutter easily chomps through picture hanging wire.I don't mind "improving" my tools but it shouldn't be necessary especially at the outside USA price.


-
@NNR, The Juice line does pose a problem when sending them in for repair or replacement since the new colors are out. You could mark the request sentimental but they may not "fix" it and send the wobbly scissors ones back. I think what I'd do is say "If you cannot fix please replace with same color" as I'm certain they have many still available.
@N_N_R said:
I have FIVE tools
Micra, PS4, Juice Xe6, S2, Wingman :D
-
Sure, thanks guys.... I'll see what I'll do when they reply :)
And yeah the prices outside the US are ... grrrr.... doubled, let's say.
Thanks for the picture :) I'm still... "afraid" to use mine a lot as it's still new and so good looking..
-
I've just receive an email from LM's customer service. They told me, without me even asking, that if I were to send the Xe6 in for an exchange to the dealer and maybe to LM under their warranty service, I'd be very likely to receive the new one, that's a quote from the mail: "(it appears that you have the original version of the tool; it has undergone an update which is basically a change in the scales and just a bit smaller knife blade)"
So..... I'm gonna keep my precious little retired Juicie and enjoy its purpleness... lol
-
I just joined the club yesterday.
I spent several hours making it a smooth,clean righteous tool.
-
Oh, great, so how do you like yours??
I'm really curious as I expected some more quality from mine... :-\ You can check the previous posts in this topic if you're interested.
-
Mine appears to be all right as far as quality control.No issues with the tips of the pliers wedging into another tool upon closing.The scissors are wobbly and needed to have some burrs removed from the blades.I think I may have a remedy for the scissors.I'll let everyone know if my remedy works.
Other than the scissors everything is OK.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login