Show off your Sak mod's!
-
-
Did you modify the scissors and/or the Recruit spring? Or just the rest?
-
-
How about this one to pack in with your lunch...
Nice round tip blade to spread butter and a nice pointy one to do other stuff :)
-
Do you also have a spring pics for this one?
The asymmetrical design of the 84mm range is pain. -
Ah neat one Peter. Ive wanted to reverse a blade on a 91mm before but never figured out how.
-
@crackout said:
Do you also have a spring pics for this one?
The asymmetrical design of the 84mm range is pain.I didn't do anything at all other than put the blade and nailfile on the wrong ends of the spring.
The nailfile is very snappy and the blade just feels like a Wenger.
I may swap the nailfile and combo.
I think the combo would be better with the strong snap rather than the nailfile. -
-
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.
First four knives with old cross scales in different blue. At last, the blue from one side to the other darker but that is difficult to photograph.




And all four together:

And first try anodizing two color:
With a little color roll the black applied, then dipped into red color tank.

Red and blue:

And this has the Kingfisher colors:

The multicolored together:

And all together:

-
Wow, Peter! :o
Those look very good.

I think they deserve a separate thread so you can tell us in more detail how you made them.

:D
-
@Sneider said:
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
-
love that red with black.
Sent from my HTC One X using Tapatalk
-
Those look very good.

I think they deserve a separate thread so you can tell us in more detail how you made them.

:D
Thank you, Nikola!

No, I fear that large postings with lots of information drown in the flood of comments and babblings. I anodized according to the usual procedures.
1 sodium hydroxide bath to remove the old anodized layer
2 aluminum cleaning bath.
3 annodize bath (in sulfuric acid and under current)
4 dyebath
5 sealing bath (cooking)Who wants to anodize should inform themselves properly. There are many sources of information on the web. The process is complex, you have to consider many things.
-
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.
Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
Thank you! :) I learned specially for my passion of alox-SAK aluminum to anodized. Yes the anodizing bath works with sulfuric acid.
I wish you good results with your Ti anodizing work.

-
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.
Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
Thank you! :) I learned specially for my passion of alox-SAK aluminum to anodized. Yes the anodizing bath works with sulfuric acid.
I wish you good results with your Ti anodizing work.

Ya Ti anodizing is easy compared to Al anodizing. I dont have to calculate current and surface area etc. Im happy letting the professionals do the hard anodize for me on Al, but Ti anodize is very easy to do at home.
-
Wow, Peter! :o
Those look very good.

I think they deserve a separate thread so you can tell us in more detail how you made them.

:D
Thank you, Nikola!

No, I fear that large postings with lots of information drown in the flood of comments and babblings. I anodized according to the usual procedures.
1 sodium hydroxide bath to remove the old anodized layer
2 aluminum cleaning bath.
3 annodize bath (in sulfuric acid and under current)
4 dyebath
5 sealing bath (cooking)Who wants to anodize should inform themselves properly. There are many sources of information on the web. The process is complex, you have to consider many things.

Looking forward to your future mods.
And I like that you're doing it on the Solo platform. I feel it's a very unjustly unappreciated model that I personally like very much. The strongest snap, very low profile but you get that great 93mm blade.
-
Wow that Custom Anodizing is great, really!!! I'm stunned.
-
Some time ago I decided to do a custom alox knife for me!
Starting point was a used sailor:


I extended it with an opener layer, a metal saw and a scissor (I used an old scissor backspring for this mod).
I was to lazy for special liners. So you might see one original brass liner and several original alu ones. I heard a lot about the heavy work needed for custom liners. I avoided this. (Maybe in the future)
The scales are very used. As this knife will be a user, I don't care about this. (Seeing the custom anodizing above maked me think, though)
However, I talked too much. ;-)
The Result is my 'Sea Ranger'






-
HankSolon,
I really like your mod Sea Ranger. It is giving ideas for a Sailor I have.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








