Little Boy and Fat Man
-
I put up the wood trim I had to remove to install in the floor I've been working on.
I did the same two thing with the little boy all day
pulling trim nails.

cutting wood trim.

both jobs were handled easy. He must have pulled a hundred nails and cut dozens of pieces of trim.
a good days work for both of us :)
-
I know this is a stupid question but do saws ever need to be sharpened or do they just keep on ticking?
-
@hrvstmn31 said:
I know this is a stupid question but do saws ever need to be sharpened or do they just keep on ticking?I was thinking about the same thing today at work.
I would think any sharp tool can dull.
I've never had a saw on a multitool get so dull I've noticed using it.
I don't know how I would sharpen it. I'd send it to leatherman for sharpening I guess
-
@hrvstmn31 said:
I know this is a stupid question but do saws ever need to be sharpened or do they just keep on ticking?They will eventually get dull after a lot of use on wood, but generally keep kicking for quite some time. I bet you will replace the tool before you need to sharpen the saw unless you use it very often. Just my experience though.
-
The saw will eventually dull with continued use; how fast depends on the hardness of what is being cut. I would think a completely shot to hell saw would get result in LM just replacing the saw on your MT...
-
If leathermans were user servicable you could replace it yourself or do something crazy like replace all the implements with saws that would be fun.
-
ST300EOD has replaceable saw
-
yes it does it also has a regular saw and no file.
I have no use for the plier head but besides that I think it's a cool looking tool.
the multitool collector hiding inside me wants one just to go with my other two >:D
@hrvstmn31 said:
If leathermans were user servicable you could replace it yourself or do something crazy like replace all the implements with saws that would be fun.I wish they were . I'd be tinkering on leatherman tools alot more.
I almost never take them apart now.
little man is still working with my doing some finishing carpentry
pulling nails , cutting trim , open snacks :)prying off a few pieces of trim

trying to fix my junk tape measure

something's not even a good leatherman can fix

-
Little boy is as big a help mowing as fat man was plowing snow :P
-
I carried my BORebar while mowing today as well, and it came in handy using the pliers to loosen the oil dipstick as I couldn't get it to turn by hand. I think I need to clean my air filter as well, but I am not very mechanically inclined and have no clue where it is. I need to dig out the manual if I can find it.
-
@JAfromMn said:
Little Boy and Fat Man
crappy inside cell pic .
^that's the first pic of little boy and fat man ^
if you look close you can see the small spot missing coating on little boys plier head pivot
I didn't see it when I looked them over
that small part has grown to cover half of the pivot
last good pic of the pliers

its got to be a flaw in the coating.
-
Contact wear from the handles maybe?
-
@JAfromMn said:
I prefer my st 300 to a swisstool but I prefer the Swisstool spirit to my rebar.If you care to elaborate on this, either now or when this round of testing is over, it would be much appreciated. I would be especially interested to know your thoughts on the Spirit vs. Rebar sometime. Thanks.
-
I prefer my st 300 to a swisstool but I prefer the Swisstool spirit to my rebar.
If you care to elaborate on this, either now or when this round of testing is over, it would be much appreciated. I would be especially interested to know your thoughts on the Spirit vs. Rebar sometime. Thanks.
I can try
ST300 vs Swisstool
the st300 is the better worker
I believe the plier head is better and the st300's inside implements are stronger, its tools were designed with work in mind where the Swisstool adds more function to its tool like the bottel opener can opener flat drivers that are a bit thinner .
I have yet to bend a super tools drivers I have bent them on the Swisstool I used to edc to work doing the same things.
I also prefer inside opening tool on my work tool. It way easier to keep clean .
rebar vs spirit
the spirit to me is the better tool.
I use this sized tool for my off work carry. The tool set in the spirit works out a better for me off work. I like all the added functions.
I'm a sak nerd at heart. I use the hook on the awl, holder for the corkscrew, all the functions of the opener-drivers,the scissors suck but they do work,I like the serrated butter knife blade. "I always carry a folder so its a back up" it compliments my ffg spyderco mostly sometimes a Wenger si.I also really like the fit and finish of Swiss made tools.
The easier to get at/open tools are preferred after work. I don't get my tool as dirty .
the rebar has worked out great for a work tool and its wire cutters are far better.
I'm starting to think every tool has its place. Some its the garbage.
I've never owned a bad victorinox or leatherman tool. Its all about the environment they live / work in if they just work or really thrive at there job.
I hope I made some sort of sense. :)
-
Thanks - I've gotten my money's worth from this thread. Interesting that you like inside tools on your work MT. I like them on the outside for quick access. But I "work" on a computer all day and not outside in the real world tearing down houses, and therefore have soft, girly hands, so I like outside tools so I get a smooth gripping surface when using the pliers. Thanks again. Your threads are among the best on MTO.
-
Very well described, JA, and I agree with all of it.

-
Excellent comparison and reviews Joel

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

