Improving the Rebar
-
I like the suggestion of introducing more tools like a "Rebar Plus", or "Rebar II", etc.
Some great ideas I'm seeing folks, I hope LM is seeing this! >:D
-
The Rebar is perfect as is. The only change I agree with is the pocket clip. That would be terrific.
If it had to have scissors, I'd rather lose the PE blade. I have a PE folder with me everywhere and at all times.
But..
SAKs have scissors. And they are better than LM scissors anyway.
-
I would trade the Rebar's serrated blade for scissors; I use scissors more often. I would prefer scissors like the Wingman has over those on the Wave. I would also go for the diamond file, again just like that on the Wave. I would probably blunt the end of the file to act as a very large slot head screwdriver instead of that odd diagonal end with no purpose.
As for a pocket-size standard box model, I'd rather they just fix the Juice line. The Juices have several advantages over the traditional Leatherman blueprint. They're more muggle friendly since they look like a nice, "harmless" SAK, and they have outside opening tools. There's so much I would change about the Juice line, like the asymmetrical thick handles, the overlapping tool concept in the awl and can opener, the corkscrew (why so many models with corkscrews? Who wants a corkscrew grinding them in the leg?) Maybe fix up the scissors. And ditch those stupid two-tone-and-half-patterned scales they've come up with!
-
@pingu said:
And what about a mini Rebar (with Torx screws) to kill-off the screwless uneven handled 2014 Juice with it's plier jamming susceptibility.I should correct that before LM let the lawyers loose. I believe that LM has sneaked in an extended small driver on the 2014 Juice line which should eliminate the unadmitted plier jamming susceptibility.

Too bad the handles are still uneven unlike the perfectly formed backspringless Rebar.
-
Scissors! That's all I want.
-
I'm just unlikely to buy a Rebar. I like my Skelestyle combo so much for EDC, and for bench/heavy field work/emergency/whatever I've got my Wave, and there's not much a Rebar can do that a Wave can't, with the possible exception of turning recessed Phillips.
Maybe as a dedicated car tool, but there are so many Torx bits on my truck that I'd really need a bit driver for that, so that's the Rebar right back out again. I just can't buy a $50 tool for no reason, and I've pretty much got all my bases covered with 4 tools and whatever a Gerber Dime is.
-
@av8r1 said:
I'm just unlikely to buy a Rebar. I like my Skelestyle combo so much for EDC, and for bench/heavy field work/emergency/whatever I've got my Wave, and there's not much a Rebar can do that a Wave can't, with the possible exception of turning recessed Phillips.Maybe as a dedicated car tool, but there are so many Torx bits on my truck that I'd really need a bit driver for that, so that's the Rebar right back out again. I just can't buy a $50 tool for no reason, and I've pretty much got all my bases covered with 4 tools and whatever a Gerber Dime is.
Let's not forget about the bit adapter which fits on the Rebar's Phillips.

-
I guess a Rebar would work for some vehicles, and you could make it work for mine with the bit adapter, but I already own a Wave with native bit support, so I just use that. On long journeys, I throw my GO-Bag in the truck, so I have all my spare water, food, weather gear, lights and tools. For local commute/grocery runs I'm comfortable with the vehicle's stock tire tools, my EDC and AAA.
I don't have anywhere else to put a Rebar either. My Wave is my GO-Bag MT, and it sees some household use when the Wingman won't do. I use the Wingman around the house mostly to save wear and tear on the Wave. There's a lot of reasons why the Rebar doesn't fit in my EDC system, or more accurately is a worse fit than my Skele/Style combo.
I do have a couple empty roles to fill, but the Rebar fits in neither. I could use a "formal carry" tool, one that is a bit more welcome at weddings and funerals than the very aggressively styled Skeletool. A Juice Cs4 or Squirt Ps4 has those gentlemanly SAK looks and still packs a Leatherman-grade punch, so I'm leaning that way for those "not jeans" occasions that'll probably happen to me more once I'm out of my twenties. I also don't have a TSA-friendly tool, but I usually don't need one. Being a pilot, my usual flight carry is my EDC, and I rarely travel by airliner. When I do, I usually just carry my EDC in a checked bag. If I suddenly start flying commercial a lot, I'll get a Style PS and a 2 or 8 or something. -
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
-
@Cupboard said:
Question for people wanting the diamond file: what do you use it for?On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
-
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
hmmm... Knifeless Rebar. I rather like that and think its a great idea.

-
@captain spaulding said:
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
hmmm... Knifeless Rebar. I rather like that and think its a great idea.

The Rebar's 2 knife blades are dangerously thin anyhow. As Gareth demonstrated in his review, they can be easily bent with little effort.
-
@Cupboard said:
Question for people wanting the diamond file: what do you use it for?To answer "what would I use it for", light duty dressing of hardish material using a tool which almost uniquely is "flimsy" compared with the stresses which most other tools have to resist when used as designed.
You raise an interesting question about a knifeless version (I see you are fellow "nanny UK'er"). While I have modded my blades to be non locking, freeing up "long space" for other tools has some merit. I fitted scissors and lost the awl but I might revisit my tool load-out and reinstate the awl over one of the blades and as you suggest cover that with a dedicated folder.
(Apologies that last suggestion was sawman's. I'm not keeping up)
-
I use a diamond file for sharpening things, like lawnmowers, hedge clippers, and REALLY dull knives. I don't own a coarse whetstone, so I use my Wave for that. I don't tend to use my crosscut file much. I use the notching edge more than the crosscut side. The Wave has my favorite configuration of file, it can do any filing you need.
I'd go along with a knifeless Rebar. I think a 100% tool would go over well, nothing says a multitool has to contain a knife. Cram in a good pair of scissors and...something else (maybe a combination corkscrew/fish scaler? ::)) and you've got a great companion to a tactical folder.
-
... so, would that be a Cork-Scaler or a Fish-Screw? :sak:
-
I dont need no scissors on a Rebar. Getting rid of the lanyard ring for a thicker knife blade would be okay! :D
-
Stronger Drivers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
