Little Boy and Fat Man
-
I got a bunch of these plastic straps with little boy today.

they are the straps that hold concrete blocks together . Some tough stuff to cut but little boys serrated blade handled them with ease.
it kept a sharp edge after cutting dozens of them.
leathermans 420hc is some pretty good steel.
-
Before this review is over I want to thank all of you for putting up with my poor grammar and spelling
I have a learning disability that makes it almost impossible for me to not mess up.
I've been trying my best.
this has been a good review.
I just read threw most of it.
amazingly most of it made sense to me.
I wish I could show it to my English teacher.
I graduated 20 years ago lol
I think I'm better at writing now than I ever have been.
these reviews I've done have really improved my writing skills.
thanks again for putting up with all my mistakes
you all rock
s -
It's all made sense to me buddy, so I'd say you're doing just fine
You've practically written a novel with this review, as well as others you've done, so it's no wonder if you see improvement in your writing. Keep up the good work and reviews my man. Oh, and what's your next review, the Surge? -
@Monrogue said:
It's all made sense to me buddy, so I'd say you're doing just fine
You've practically written a novel with this review, as well as others you've done, so it's no wonder if you see improvement in your writing. Keep up the good work and reviews my man. Oh, and what's your next review, the Surge?Thanks Man I appreciate the

I'm going to do the mp600 I got as a gift from a friend that wanted to see it reviewed next. Ive never used a made in usa gerber. I'm excited to get my next review with it started. :ahhh
Then I'm going to do something similar to this review only this time it will be the new surge and a charge alx. I'm borrowing the surge from a member.

the charge is all mine >:D
I got them all waiting in my safe. -
Oh cool, I have wondered h the Gerbers can do. That's one company I haven't tried out yet (for MTs I mean). They do seem to have a very mixed rep around here, so it'll be interesting to see how you like it and how it handles what you put it through

-
The only other Gerber pliers ive owned was a Gerber suspension I broke with in a few days after I bought it.
I'm going to be bummed if there made in USA tools are junk also
we will see
-
@JAfromMn said:
The only other Gerber pliers ive owned was a Gerber suspension I broke with in a few days after I bought it.**I'm going to be bummed if there made in USA tools are junk also **
we will see
In my experience, they're not

They are clunky, maybe not the most efficiently designed tools that are around. But they surely aren't junk :)
-
It's been a hell of a review Joel, you've provided some super entertainment

I look forward to the next one

-
I can't even remember the last time i followed a review the way i followed yours, with a lot of interest.
Awesome job man, awesome.
-
@sawman said:
It's been a hell of a review Joel, you've provided some super entertainment
I look forward to the next one

What Steve said.

I know I haven't posted here much lately but I've always dropped in and followed the adventures of the two LM. :D
If you do a Gerber MP600 review, I'd love to read it. I'm hopefully getting my first one soon so I don't have any personal experience with them.
-
Thanks for all the positive comments
you all are very kind.
-
As always, it is nice to see tools in actual use as that is the only real test! :)
So what name are you gonna give to the Gerber??
-
I'm still thinking about a name.
thanks Mike
-
I've had a satin Rebar, and later a BO Rebar on me almost every day since I started reading this thread. Which says something - maybe that I am susceptible to peer pressure. :) But the Rebar has certainly come in handy. Maybe I'll switch to MP600 to correspond with your next thread. This is not original to me, but the MP600 is somewhat like the AK-47 of MTs. Its sorta rattly and cheapy feeling (to me), but always goes bang when you ask it to. And that's the real point of carrying an MT. Thanks for one of the finest threads on MTO, and I look forward to the next one.
-
@powernoodle said:
I've had a satin Rebar, and later a BO Rebar on me almost every day since I started reading this thread. Which says something - maybe that I am susceptible to peer pressure. :) But the Rebar has certainly come in handy. Maybe I'll switch to MP600 to correspond with your next thread. This is not original to me, but the MP600 is somewhat like the AK-47 of MTs. Its sorta rattly and cheapy feeling (to me), but always goes bang when you ask it to. And that's the real point of carrying an MT. Thanks for one of the finest threads on MTO, and I look forward to the next one.I highly doubt that it was peer pressure that is the reason you carry a rebar.
most likely its that you know a good tool when you see/feel one.
thanks for following powernoodle
I'm looking forward to doing many more reviews.
ps
I haven't unsheathed little boy yet today.
I've been shoveling gravel all day
-
@powernoodle said:
I've had a satin Rebar, and later a BO Rebar on me almost every day since I started reading this thread. Which says something - maybe that I am susceptible to peer pressure. :) But the Rebar has certainly come in handy. Maybe I'll switch to MP600 to correspond with your next thread. This is not original to me, but the MP600 is somewhat like the AK-47 of MTs. Its sorta rattly and cheapy feeling (to me), but always goes bang when you ask it to. And that's the real point of carrying an MT. Thanks for one of the finest threads on MTO, and I look forward to the next one.Awesome analogy to describe the MP600.
I try and explain to people the essence of the MP600 and MP400 and that sums it up well. -
@captain spaulding said:
I've had a satin Rebar, and later a BO Rebar on me almost every day since I started reading this thread. Which says something - maybe that I am susceptible to peer pressure. :) But the Rebar has certainly come in handy. Maybe I'll switch to MP600 to correspond with your next thread. This is not original to me, but the MP600 is somewhat like the AK-47 of MTs. Its sorta rattly and cheapy feeling (to me), but always goes bang when you ask it to. And that's the real point of carrying an MT. Thanks for one of the finest threads on MTO, and I look forward to the next one.
Awesome analogy to describe the MP600.
I try and explain to people the essence of the MP600 and MP400 and that sums it up well.All the MP's are built like brick smurf-houses. I prefer the ones with replaceable wire cutters and wharncliffe blade but there are several variants to choose from.
-
Well I did a bunch of work with little boy today.
I didn't have time for pic.
I rewired a trailer and fixed the fender on the tote truck we move houses with.
now here's the bad news
I broke the flat driver on little boy.
I was fixing the fender on the truck I was using the driver to hold a large flat head screw with it while tightening its nut. It just snapped. I was working at a odd angle but I can't understand why it broke. I wasn't using that much force.
I had a feeling it was going to happen. He had less than two weeks of work before I switched tools.
here's a pic

I'm a little disappointed. I wasn't abusing it. I'd understand if I was doing something I shouldn't.
on top of that I got a mobile home stuck im a ditch
its gonna suck getting it out.
I'm having a bad day.
-
I guess I will be finishing this review with the fat man.
I was really hoping to just keep using the rebar.
-
That's a bummer! Damn bogus heat treating >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login