Improving the Rebar
-
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
-
@Cupboard said:
Question for people wanting the diamond file: what do you use it for?On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
-
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
hmmm... Knifeless Rebar. I rather like that and think its a great idea.

-
@captain spaulding said:
Question for people wanting the diamond file: what do you use it for?
On my MTs I only tend to use the cross cut side. Fine sharpening I do with one of my various dedicated sharpeners and coarse sharpening I do on a grinder.
As for the Rebar: I'd like to see a better array of flat screwdrivers (like the Pulse) because I find the ones on the current Rebar too limited. I'd also like a knifeless version, maybe having both the bit driver and long Phillips like my mod.
If there were a knifeless version of the Rebar, that would open up all kinds of space for more drivers, which I think is a great idea. If I need a knife, I'm not very likely to go thru all the steps of opening the Rebar then plucking out the blade. I'd rather use a dedicated folder or the blade on my Wave.
hmmm... Knifeless Rebar. I rather like that and think its a great idea.

The Rebar's 2 knife blades are dangerously thin anyhow. As Gareth demonstrated in his review, they can be easily bent with little effort.
-
@Cupboard said:
Question for people wanting the diamond file: what do you use it for?To answer "what would I use it for", light duty dressing of hardish material using a tool which almost uniquely is "flimsy" compared with the stresses which most other tools have to resist when used as designed.
You raise an interesting question about a knifeless version (I see you are fellow "nanny UK'er"). While I have modded my blades to be non locking, freeing up "long space" for other tools has some merit. I fitted scissors and lost the awl but I might revisit my tool load-out and reinstate the awl over one of the blades and as you suggest cover that with a dedicated folder.
(Apologies that last suggestion was sawman's. I'm not keeping up)
-
I use a diamond file for sharpening things, like lawnmowers, hedge clippers, and REALLY dull knives. I don't own a coarse whetstone, so I use my Wave for that. I don't tend to use my crosscut file much. I use the notching edge more than the crosscut side. The Wave has my favorite configuration of file, it can do any filing you need.
I'd go along with a knifeless Rebar. I think a 100% tool would go over well, nothing says a multitool has to contain a knife. Cram in a good pair of scissors and...something else (maybe a combination corkscrew/fish scaler? ::)) and you've got a great companion to a tactical folder.
-
... so, would that be a Cork-Scaler or a Fish-Screw? :sak:
-
I dont need no scissors on a Rebar. Getting rid of the lanyard ring for a thicker knife blade would be okay! :D
-
Stronger Drivers
-
I'm glad I put a smile on your face :)
still they need to improve them
a tool shouldn't break using it on something it was made for.
they could ditch the unless lanyard ring and make the flat driver thicker.
has anyone used the ring. I have never seen anyone use it.
-
@JAfromMn said:
has anyone used the ring. I have never seen anyone use it.Pay attention at the back :)
</post/897691>
I have to say I totally agree with you. While I prefer lanyard carry, or at least a short length of cord, the ugly Rebar ring is worse than an afterthought on a tool of elegant simple lines. I'd like to see an attachment at the plier pivot end, a tab a la PST or something better.
I plan to ditch mine and possibly replace with a slimline lanyard loop/caplifter made from a Bear Grylls Compact driver. If its going to look an ugly afterthought might as well be useful.
-
@PTRSAK said:
... so, would that be a Cork-Scaler or a Fish-Screw? :sak:you joke, but I was staying somewhere this week and the provided corkscrew's screw was so badly defined you couldn't use it to open a bottle. Probably would have worked as a fish scaler!
Glad to have had a SAK with me for that and the can opener.
-
... so, would that be a Cork-Scaler or a Fish-Screw? :sak:
you joke, but I was staying somewhere this week and the provided corkscrew's screw was so badly defined you couldn't use it to open a bottle. Probably would have worked as a fish scaler!
Glad to have had a SAK with me for that and the can opener.
Which brings us back to this: Every good SAK should be paired with a good LM. Every good LM should be paired with a SAK!
-
The Rebar might be better with rounder handles and scissors.
-
Scissors and a built in but removable pocket clip would be the secks as far as the Rebar goes.
Leave the rest of it alone, please! :D
-
That reminds me - the PST II had this funky scissors where the handle folded out as well, so there were 2 pivots (not counting the one in the tool's body). Is that the original scissors? How many tools had it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

