Little Boy and Fat Man
-
@powernoodle said:
Good luck. My advice about the mobile home is to apply lots of force. You can thank me later. And I appreciate very much your unequivocal statement about the ST300. That's cool. Rock on.it took lots of slow steady force .
and alot if preparing .
-
Since I didn't get any in action shots of fat man today Here's a shot of a tool taking a break

Ps
don't give me crap for smoking.
I am trying to quit.
its alot harder than I thought it would be.
its a stupid habit.
all it does it cost money and shorten my life .
-
That cig looks mighty good...almost 2.5 years since the wife and I quit, and I still miss it :-\
-
That cig looks mighty good...almost 2.5 years since the wife and I quit, and I still miss it :-\
I'm glad you quit Kyle.
it really is a stupid habit.
Ps 20,000+ views

Me too, but this time of year is the hardest. We could more freely smoke since it would be warmer outside. Plus getting together with family (my side) that smokes, like at cookouts and stuff like that, makes it tough. Fortunately non of my wife's family smokes, so that's nice to hang around them without that "aura" of being a smoker around us. I hope you can bring yourself to quit one day. I know it's not easy at all. Even though they say if you can make it one day, you can make it every day, but that urge is still there, and I'm beginning to think it never fully goes away.
Anyway, I don't want to derail your thread with that ;) Congrats on 20,000 views man

-
Thanks Kyle
I'm sure a few hundred of those views are yours.

-
Sorry no pics but I used the fat man to unbend the shroud on a push mower.
I hit a big rock and bent in in pretty good.
I needed to use two hands to get it bent back.
I appreciate fat mans large handles that gave me alot more leverage.
im off work early . I wanted to enjoy my Saturday and take it easy.
I got to mow my own yard tomorrow.
-
Whew, I managed to catch up.
Sucks to hear about the Little Boy. I have to agree with enki, it looks like a failure due to torque. Rust can not be the issue, as you see the shiny break planes and also how clean the joint portion is.
Maybe the driver hardend under stress so the bottom part (which looks like it's rounded out - a sign of an instantanious fracture) gave way. I only have a basic knowledge of metallurgy, so take this with a grain of salt.
I hope you enjoy working with Fat Man and the LM will take good care of you.
-
@RT1969 said:
Whew, I managed to catch up.Sucks to hear about the Little Boy. I have to agree with enki, it looks like a failure due to torque. Rust can not be the issue, as you see the shiny break planes and also how clean the joint portion is.
Maybe the driver hardend under stress so the bottom part (which looks like it's rounded out - a sign of an instantanious fracture) gave way. I only have a basic knowledge of metallurgy, so take this with a grain of salt.
I hope you enjoy working with Fat Man and the LM will take good care of you.
Thanks Rolling Thunder
and thanks for following
I'm happy to be working with the fat man again and I'm sure leatherman will take good care of me.

-
This is the last week of this 6 month review.
I'm a little sad its almost over but I'm excited to try some new tools.
I'm going to take a short break and Il be starting my next review a few weeks.
after this one ends.thanks again everyone who has been following.
this has been fun.

if you have anything you would like to see tested/questions with a rebar or st300 just ask.
id hate to end this review while someone still has questions
-
I guess my only questions are since I don't remember from the review - directed at ST300:
Did you use the awl?
Did you use all the flat drivers?
Did you use both blades as well as file and saw?
- and if so, how did it work for you?
-
@sawman said:
I guess my only questions are since I don't remember from the review - directed at ST300:Did you use the awl?
Did you use all the flat drivers?
Did you use both blades as well as file and saw?
- and if so, how did it work for you?
I did use all the tools on each tool except I don't think I ever used the small flat driver on the fat man
the awls work very well at making starter holes for screws on both plastic and wood.
the files I used to sharpen a few tools and the metal saw I used to cut some hose clamps. I was impressed how good it worked. That was the one tool I thought would suck but it actually worked very well.
all the blades were used to cut all kinds of different materials . Again I got to say leathermans 429 HC is some good steel. Its not great but it does hold a edge well and is very easy to sharpen. It does get damaged easily but it is also easy to fix.
I'm going to try get some action pics of the awl and file in use I don't think I got any in this review yet.
now that I think about it I may have used the small driver on fat man to remove some fuses but I can't remember. I may have used the awl.
I did alot of work with both tools and the only breakage was the flat driver on little boy. These two tools took alot of punishment.
-
This has been an interesting read for sure. Keep up the good work Joel, and I look forward to your next round of testing

-
Just some random thoughts...
I also like their 420HC and whatever they use for the saw blade. I've used the Wave's saw much more than any Vics so can't compare those but I can vouch the Wave's saw works terrific.
I used my Rebar's awl to cut some new holes in my wife's new shoes and that worked pretty well.
I'm still concerned with the flimsiness of the Rebar's 2 main cutting blades and for this reason have not used them yet.
I've used both the Rebar's and the Wave's wire cutters on several occasions for cutting things other than wire and they always perform well.
Since you're reviewing a MP600 next I will mention that its replaceable wire cutters are not as good as those on the Rebar. There is some looseness that causes them to bind up on certain materials.
That said, thanks for answering my Q's - I'm looking forward to your experience with the Gerber :D
-
@sawman said:
Just some random thoughts...I also like their 420HC and whatever they use for the saw blade. I've used the Wave's saw much more than any Vics so can't compare those but I can vouch the Wave's saw works terrific.
I used my Rebar's awl to cut some new holes in my wife's new shoes and that worked pretty well.
I'm still concerned with the flimsiness of the Rebar's 2 main cutting blades and for this reason have not used them yet.
I've used both the Rebar's and the Wave's wire cutters on several occasions for cutting things other than wire and they always perform well.
Since you're reviewing a MP600 next I will mention that its replaceable wire cutters are not as good as those on the Rebar. There is some looseness that causes them to bind up on certain materials.
That said, thanks for answering my Q's - I'm looking forward to your experience with the Gerber :D
thanks Steve
I used the blades on my rebar quite a bit.
I wouldn't dare pry anything with them but for straight on cutting they worked well. The thinness makes the great slicers.
-
Easy day for the fat man.
it cut a little wire and I used the file to clean off some rust on a trailer house frame to make a good ground.
I stripped the wire with honest John the es4 he's way better at it than the fat man.
now I got another house to ready to move.
the site wasn't ready or it would have been moved today.
-
That has me thinking, that my PS4 paired with a Classic or Rambler might be a good EDC and that would give me both types of file!
-
Wow, it's been 6 months already? Thanks for the in-depth and honest review!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login