Little Boy and Fat Man
-
I guess my only questions are since I don't remember from the review - directed at ST300:
Did you use the awl?
Did you use all the flat drivers?
Did you use both blades as well as file and saw?
- and if so, how did it work for you?
-
@sawman said:
I guess my only questions are since I don't remember from the review - directed at ST300:Did you use the awl?
Did you use all the flat drivers?
Did you use both blades as well as file and saw?
- and if so, how did it work for you?
I did use all the tools on each tool except I don't think I ever used the small flat driver on the fat man
the awls work very well at making starter holes for screws on both plastic and wood.
the files I used to sharpen a few tools and the metal saw I used to cut some hose clamps. I was impressed how good it worked. That was the one tool I thought would suck but it actually worked very well.
all the blades were used to cut all kinds of different materials . Again I got to say leathermans 429 HC is some good steel. Its not great but it does hold a edge well and is very easy to sharpen. It does get damaged easily but it is also easy to fix.
I'm going to try get some action pics of the awl and file in use I don't think I got any in this review yet.
now that I think about it I may have used the small driver on fat man to remove some fuses but I can't remember. I may have used the awl.
I did alot of work with both tools and the only breakage was the flat driver on little boy. These two tools took alot of punishment.
-
This has been an interesting read for sure. Keep up the good work Joel, and I look forward to your next round of testing

-
Just some random thoughts...
I also like their 420HC and whatever they use for the saw blade. I've used the Wave's saw much more than any Vics so can't compare those but I can vouch the Wave's saw works terrific.
I used my Rebar's awl to cut some new holes in my wife's new shoes and that worked pretty well.
I'm still concerned with the flimsiness of the Rebar's 2 main cutting blades and for this reason have not used them yet.
I've used both the Rebar's and the Wave's wire cutters on several occasions for cutting things other than wire and they always perform well.
Since you're reviewing a MP600 next I will mention that its replaceable wire cutters are not as good as those on the Rebar. There is some looseness that causes them to bind up on certain materials.
That said, thanks for answering my Q's - I'm looking forward to your experience with the Gerber :D
-
@sawman said:
Just some random thoughts...I also like their 420HC and whatever they use for the saw blade. I've used the Wave's saw much more than any Vics so can't compare those but I can vouch the Wave's saw works terrific.
I used my Rebar's awl to cut some new holes in my wife's new shoes and that worked pretty well.
I'm still concerned with the flimsiness of the Rebar's 2 main cutting blades and for this reason have not used them yet.
I've used both the Rebar's and the Wave's wire cutters on several occasions for cutting things other than wire and they always perform well.
Since you're reviewing a MP600 next I will mention that its replaceable wire cutters are not as good as those on the Rebar. There is some looseness that causes them to bind up on certain materials.
That said, thanks for answering my Q's - I'm looking forward to your experience with the Gerber :D
thanks Steve
I used the blades on my rebar quite a bit.
I wouldn't dare pry anything with them but for straight on cutting they worked well. The thinness makes the great slicers.
-
Easy day for the fat man.
it cut a little wire and I used the file to clean off some rust on a trailer house frame to make a good ground.
I stripped the wire with honest John the es4 he's way better at it than the fat man.
now I got another house to ready to move.
the site wasn't ready or it would have been moved today.
-
That has me thinking, that my PS4 paired with a Classic or Rambler might be a good EDC and that would give me both types of file!
-
Wow, it's been 6 months already? Thanks for the in-depth and honest review!
-
Well I gotta tell you Joel, this thread convinced me to buy and carry a Rebar. It's gotten a lot of carry time at work. Going with me tomorrow in fact. It doesn't see what you've put yours through, but it's not exactly babied either. I sure like that tool.

-
@jerseydevil said:
Well I gotta tell you Joel, this thread convinced me to buy and carry a Rebar. It's gotten a lot of carry time at work. Going with me tomorrow in fact. It doesn't see what you've put yours through, but it's not exactly babied either. I sure like that tool.
I'm glad you like it Tom.
its a great tool for its size/cost.
I got to get mine fixed but its going to be in my edc rotation for a long time to come. -
Love this thread - it's one of the reasons I bought my Rebar. Great to see tools being used properly (and not just mucking about with them in your pocket like the rest of us ;) ). Looking forward to seeing how your next review pans out.
-
@hiraethus said:
Love this thread - it's one of the reasons I bought my Rebar. Great to see tools being used properly (and not just mucking about with them in your pocket like the rest of us ;) ). Looking forward to seeing how your next review pans out.thanks hiraethus
I hope your rebar works great for you.
-
The fat mans cap crimper plier head works excellent to pull codder pins.

he also cut some wire and that's about it.
he stayed in his skinith home for the rest of the day :)
-
That's another use for my Charge TTi's crimper! I hadn't thought of pulling pins before. Thanks Joel!!!

-
JA, Leatherman should give you a kick back of some sort. I know of 5 Rebar's you helped sell with your review just from the posts in this thread. Considering the number of total views (20k+), I'd put that total realistically in the 50-100+ range and I think that's being conservative.
-
I do these reviews for fun WildJ3 if I got paid in some way it might turn into a job
I work hard enough the way it is with my job now. :D
-
The fact that the large blade got broken is not really new news. Those are pretty notorious for breaking and BTW, that's the same flat driver as found on the Wave and other LM's. I've found mine personally to be pretty tough for prying to driving screws or whatever but I think there's some that miss a good heat treating.
I wonder if there's any way LM could stress test some of the parts before adding them to their tools. I know this would add cost to the process but might be worth it for a decent tool.
-
@sawman said:
The fact that the large blade got broken is not really new news. Those are pretty notorious for breaking and BTW, that's the same flat driver as found on the Wave and other LM's. I've found mine personally to be pretty tough for prying to driving screws or whatever but I think there's some that miss a good heat treating.I wonder if there's any way LM could stress test some of the parts before adding them to their tools. I know this would add cost to the process but might be worth it for a decent tool.
Broken Blade ???
and I'm still surprised I broke that driver
I would like to see every tool past a test also. The way leathermans quality control is I don't think that it would ever happen .
I also agree I think there heat treatment may be hit and miss. It shattered more than broke. It was made to hard maybe .
fat man helped put in a water meter today I was. Leveling lots most of the day
it all pays the same :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
