Does this exist?
-
If you want just a knife and drivers how about the leatherman 304

Sak's rule !
-
Perhaps this one ... http://www.sakwiki.com/tiki-index.php?page=Outrider

... with some little mod like this

Pic taked from here http://www.bladeforums.com/forums/showthread.php/683623-Modified-SAK-picture-thread:D
-
Hmmm... I think you'll need either a mod or a tool combo to get this ;)
Try a Leatherman Crater C33t and combine it with (for example) a Vic Executive? Or, alternatively, a Vic Huntsman?
-
@Caranthanus said:
Perhaps this one ... http://www.sakwiki.com/tiki-index.php?page=Outrider
... with some little mod like this

Pic taked from here http://www.bladeforums.com/forums/showthread.php/683623-Modified-SAK-picture-thread:D
I think that one was sold here recently.
-
It seems what you're after doesn't exist, at least not in one single tool. What's really jamming you up is limiting it to a OHO locking blade. If not for that a LM Blast would meet your needs and I can think of quite a few others!
-
Really appreciate the replies... surprised that in the millions of models out there this is hard to find.
I had totally forgotten about the Leatherman Crater -
- although I have spent many many hours on the Leatherman website, I have been using the Australian site - which does not have the Crater. I don't think it would be illegal here, but...Looks like if I want the all on one I will have to mod.
-
Sometimes a multi-tool (see what I did there) solution can be easier to find, less expensive, and even more compact than looking for a single tool that meets all of your needs.
There are a number of 3-5 layer SAKs (Ranger, Huntsman, Mountaineer, and Super Tinker just to name a few) which would meet some or all of your requirements, except for the OHO locking blade. So, pick one of those and add a OHO locking folder of your choice.
As an example, a Vic Ranger plus a Spyderco Delica together meet every one of your specifications (including the nice-to-haves), but at 4 ounces for the Ranger and 2.5 ounces for an FRN-handled Delica, you would realize better than a 20% reduction in weight vs. your 8.2-ounce Charge TTi.
-
What about the Buck Xtract:
OHO, locking blade
Phillips 7 Flathead
Scissors -
It can be had with pliers, too.
And I just thought that the combo of a Skeletool with a Vic Compact should cover the bases, too. -
What about the Buck Xtract:
OHO, locking blade
Phillips 7 Flathead
ScissorsThat's a pretty good deal there. Assuming he doesn't require pliers that just might meet his requirements!
IIRC the Buck X-tract 732 model has both pliers and scissors (but I have no idea how good or bad they are).
(edit: Thomas beat me to it).
-
Wow, thanks for the extra help.
Never heard of that Buck one, will check it out. At first glance it looks light enough, but might prove as bulky as my Charge. But looks a good deal.
And maybe a combo is the way to go - add a keychain size something with scissors etc in combo with the skeletool.
Which could be a lot cheaper than hanging around this forum for too much longer.. the more suggestions the more I want. :ahhh
-
What about the Buck Xtract:
OHO, locking blade
Phillips 7 Flathead
ScissorsThat's a pretty good deal there. Assuming he doesn't require pliers that just might meet his requirements!
IIRC the Buck X-tract 732 model has both pliers and scissors (but I have no idea how good or bad they are).
(edit: Thomas beat me to it).
I've got that Buck you are referring too (didn't think it was 732 though :think:)
When it finally arrived (China) I dismissed it as pure junk as the tools had lateral movement...HOWEVER...
I tightened them up - torx heads. The damn thing is now solid as a rock. As much as I liked to slate it, I can't.
It DOES seem to be a good multitool.The best bit is, it is completely OHO on ALL tools!!
:tu:
-
@aussieman said:
Wow, thanks for the extra help.Never heard of that Buck one, will check it out. At first glance it looks light enough, but might prove as bulky as my Charge. But looks a good deal.
And maybe a combo is the way to go - add a keychain size something with scissors etc in combo with the skeletool.
Which could be a lot cheaper than hanging around this forum for too much longer.. the more suggestions the more I want. :ahhh
By all means... stay for awhile >:D
-
Hi aussieman
Ive got the Buck, so decided to do a few comparable pictures next to your TTi.
Hope it helps.
P.S The Buck was far less fiddly oppening the tools

Here goes..
.jpg)
.jpg)
.jpg)
.jpg)
-
A few more...
(forgive the lousy quality. i took all pics on the Ipad but it wouldnt upload (files too big!!) so then re-shot everything on the Iphone..again files too BIG..

so.....got the ancient compact out and booted up the equally ancient laptop and resized everything - hence dreadful quality - sorry).jpg)
.jpg)
.jpg)
-
The Buck appears to be bigger than the Charge.
-
@sawman said:
The Buck appears to be bigger than the Charge.Hi sawman
Yes, the Buck is thicker, not much in the length.
Obviously the LM build is far superior, but then its 3-4 times the price!!
But, as I haven't had the TTi out for quite some time time, I found it unbelievably fiddly, The Buck on the other hand was simplicity itself....everything just slid out and locked!!.
If I were stuck in a scenario where I only had one free hand, I would definately go with the Buck regardless that it isn't upto LM standards.

-
The Buck appears to be bigger than the Charge.
Hi sawman
Yes, the Buck is thicker, not much in the length.
Obviously the LM build is far superior, but then its 3-4 times the price!!
But, as I haven't had the TTi out for quite some time time, I found it unbelievably fiddly, The Buck on the other hand was simplicity itself....everything just slid out and locked!!.
If I were stuck in a scenario where I only had one free hand, I would definately go with the Buck regardless that it isn't upto LM standards.

Oh I don't argue that for OHO it beats the Charge. I used to own a Buck Tool albeit not the same model and did like that about it.

-
The Buck is nice in hand and light weight, but not that tough.
The scissors are fantastic for paper because they're so long but not for anything much heavier.
what do you want the scissors for? Have you thought about getting a 58mm Vic for them?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login