Gerber Multiplier mangling
-
Looks good Thomas! Where did the awl come from?
-
It came standard on this MP 600 - I believe it´s called the Scout. The file has a diamond coated side and the awl is quite good.
-
-
Very nice thomas

-
I'd love an AWL in my 600

-
I guess teh medium flat blade could be reprofiled? I do have soem to spare...

-
I might have to give it a go Thomas
I have a spare I think 
if I Screw it up i'll give you a shout for a 'plan B' -
Thomas will the paul chen clip fit the mp600

-
I think it will not work well.
The handle on the PC is wider and has no locktabs, so the Clip must be ground slimmer.
The Gerber has one fixed and one screwed pin on the pivot, but the screwed pin is on the right handle side, so the clip has teh wrong form.
I guess a straight, slim clip from a knife will be an easier mod. -
@lowtech said:
I think it will not work well.
The handle on the PC is wider and has no locktabs, so the Clip must be ground slimmer.
The Gerber has one fixed and one screwed pin on the pivot, but the screwed pin is on the right handle side, so the clip has teh wrong form.
I guess a straight, slim clip from a knife will be an easier mod.Cheers thomas, ill have to source a bo clip

-
As usual, my meager mods don´t deserve a whole thread of their own, so I do a little Zombifying with my own thread...
At last i managed to rearrange the tools in my EDC MP 600 so i can access teh middle tools (awl especially) better.
The nail nicks were blocked off by each other before so you had to fold everything out and fold back what you don´t need.
BTW: Anybody wants to trade the diamond file for a regular one?
And while I was at it, I did repair/improve a Diesel I had. I put in teh 3D Phillips from an MP 600 as I like it better. The file was replaced as the Diesel ones was broken.

To keep Nailnicks accesible I replaced teh big flat driver with teh one out of a MP 600, too.
You only loose teh lanyard ring.
Like they belong there...
All standard Diesel Tools, only rearranged:
I had no Issues with the difference (which is minimal) in pivot area size between Diesel and MP 600. Lockup is fine on all tools.
This is the reason it did not stay:

No Bluntnose Version. Accomodating a MP 600 head will destroy the finish as you need to widen the slider openings.
A Paul Chen Shear head will fit perfectly, though. Just for thought.I think I am looking for an SS Diuesel as a trade, so PM me. I need to mangle on. ;)
-
Dude, totally forgot about the shear head thing and I have spare Diesel handles atm. :ahhh Still got a Paul Chen for me?
-
I have an Excalibur with one handle-backspring broken off or a fully functional PAul Chen. Let´s PM for details.
-
I'm trying to find pictures of a shortened MP600 plier head (the way it sticks out from the handles irritates me)
Does anyone know where I might find some?
-
I mean a normal MP600 that has had an altercation with a bench grinder :P
-
@Sea Monster said:
I mean a normal MP600 that has had an altercation with a bench grinder :PWell, I know of the following "normal" (ie std production) MP600 pliers:
Needle Nose with carbide cutters
Needle Nose without carbide cutters
Needle Nose with cap crimper
Blunt Nose with carbide cutters
Blunt Nose without carbide cutters
Fisherman(Technician) extra long needle nose with carbide cutters
Cable CutterWhich particular one were you interested in ?
-
I've got an MP600 Needle Nose, Carbide cutters.
I don't like the way the pliers stick out the end of the handles when they are contracted, so I'm considering grinding them back a bit, and was wondering if anyway had done it, and if there were pictures of how it looked after :P
-
@Sea Monster said:
I've got an MP600 Needle Nose, Carbide cutters.I don't like the way the pliers stick out the end of the handles when they are contracted, so I'm considering grinding them back a bit, and was wondering if anyway had done it, and if there were pictures of how it looked after :P
I'm pretty sure a few people on here have ground back their MP600 NN pliers and published photos, but IIRC they were the ones without carbide cutters and they ground them back quite a lot to make very blunt nose pliers. That may be a bit more than what you are proposing, but they looked OK to me.
-
Just grind a little and see what that looks like and if you don't like the way it is going then don't grind anymore :D What you are talking about doing is just taking it back some and I don't think it will change the look of it that much

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login











