Your favorite small screwdrivers.
-
My experience with the philips on the PS4 has been almost entirely good. I did try turning a wonky sized screw with it (smaller than a #1 philips, but not sure what size), and it hopped out, leaving marks on the sides of the driver. Other than that, all good.
I have tested a LOT of the mini drivers on keychain tools, to test fit in eyeglass screws. Many don't fit. Every Micra I've ever tested fit great. My old v1 SOG Crosscuts both fit. The new 2.0 Crosscut needed just a hair filed off to fit.
I love the drivers on the Micra, both the flat and philips. Both have great reach and are super sturdy for the size of the tool.
But I will tell you the driver I love above all others: The combo caplifter/flathead on swiss army knives. 84, 85, 91, and 93mm. All of them. Frickin' brilliant. GREAT screwdrivers, and GREAT light pry tools. I have said it like a zillion times. People should carry SAKs over just plain old knives, if for no other reason than to have a good light pry tool to save their blade tips from destruction. It is simply amazing how much such a small tool can accomplish.
This holds true to a lesser degree right across all MTs. The flat driver on Leathermans, the Wave, PST, Rebar, all of them. GREAT. So very handy.
I REALLY like the dedicated Leatherman philips, like on the Rebar.
-
My first thought for small phillips is the Vic Rambler. It's perfect. I've taken apart a laptop with it alone. It even has a small flat head on the tip of the nail file.
-
My favorite is the LM Style series. It does a good job with any Phillips smaller than my Skeletool's stock bits will handle, and it's a champion with eyeglass screws. The Micra's Phillips tip or the point on the bottle opener are both too thick to turn the screws on my glasses. The one in my new Squirt on the other hand isn't. The squirt's phillips bit will turn eyeglass screws with no problem.
Overall, I think the Squirt covers the most bases for screw driving in a keychain size form factor, since it will turn Phillips, eyeglass, medium and large slots. They don't advertise it, but the tip of the file works great as a large slotted screw driver. -
@enki_ck said:
My first thought for small phillips is the Vic Rambler. It's perfect. I've taken apart a laptop with it alone. It even has a small flat head on the tip of the nail file.Absolutely agree of Rambler/Manager/Rally. Amazing how many small sizes the philips and flat covers for a one ounce tool.
I have even used one side of the tweezers to tighten a flat screw on glasses when the files flat head is too fat. -
@Mextreme said:
I have even used one side of the tweezers to tighten a flat screw on glasses when the files flat head is too fat.Same here. This is one of those 'hidden abilities' I don't think many people are aware of with SAKs, and a large reason I haven't really bothered with the mini screwdriver that can go into a corkscrew.
-
I may have also have gone way beyond 'small' drivers in my first post. Sorry. In general i love the micra's for keychain scale tools but the Rambler wins for tiny philips
Sent from my iPhone using Tapatalk
-
My first thought for small phillips is the Vic Rambler. It's perfect. I've taken apart a laptop with it alone. It even has a small flat head on the tip of the nail file.
Absolutely agree of Rambler/Manager/Rally. Amazing how many small sizes the philips and flat covers for a one ounce tool.
I have even used one side of the tweezers to tighten a flat screw on glasses when the files flat head is too fat.^^^
ThisI carry my Manager or MiniChamp on my keys and have found the drivers are the right size when a small one is needed. I'll add they also can handle a bit more than their demure size suggests.
-
not the one on the Rebar, it's too big.
-
1 oz clear neutral spirts, 1 oz fresh squeezed orange juice
Oh, no that kind of screwdrivers....
For EDC, the glasses driver that goes in the corkscrew of a SAK. For the bench, the Craftsman precision drivers that have the colored spinny heads.
-
I'm wondering if anyone's ever run into a screw (slotted or Phillips) that's too small for the new Squirt/Style flat driver, but works with the double sided bit from the Charge/Wave.
Also, am I right that the Blast is the only non Wave/Charge/Surge style tool to incorporated the small bit holder?
If you can't tell, I'm trying to cover my bases without needing to lug my Charge around every day. Also for those times when I don't want the liability of a locking blade... :P
-
@NeitherExtreme said:
If you can't tell, I'm trying to cover my bases without needing to lug my Charge around every day. Also for those times when I don't want the liability of a locking blade... :PI'm confident you will be able to cover everything without resorting to a tool of that size. If I feel I'm going to be doing a lot of screwing (;)), I typically take my usual Vic Climber (with mini-screwdriver in the corkscrew) and a Squirt P4 (it was bordering on criminal to get rid of the superb extra-small screwdriver on the P4 for the mediocre scissors on the PS4, but I digress). I don't believe I've seen many (if any) flat head or Phillips screws that combo couldn't handle...
-
I use the eyeglass screwdriver on my Explorer Plus all the time. Perfect fit for my sunglasses.
I also love the tiny precise Philips in my alox Rambler. Both great knives.
Sent from my Nexus 10 using Tapatalk
-
The Rambler/Manager's Phillips is excellent as it's a small driver that will handle big screws (and smal ones obviously). This is one of the reasons I keep a Manager on my keys permanantly.
With small flat heads, I generally only need them for specs. I find using the tweezers (or other improvised drivers) verty tricky, so I like to have something I know I'll be comfortable using. Thankfully, there's lots of viable options for this. Here's a list of some of the better eyeglass drivers I've used ...
<u>Buck</u>
Minibuck 350<u>Coast</u>
C2899B<u>Gerber</u>
Balance
Fit
Splice/Vice<u>Leatherman</u>
PST II
Squirt P4
Micra
Juice (but you'll get injured getting the bloody thing out ::))<u>SOG</u>
Crosscut<u>Swiss+Tech</u>
Utilikey<u>True Utility</u>
Microtool<u>**Wenger **</u>
Pocket Tool Chest (my personal favourite for specs)<u>Victorinox</u>
tip of 74mm orange peeler
Corkscrew mini driver -
The 58mm Victorinoxs drivers are my go too. Light duty for sure, but pretty handy. Also appreciate the mini driver in the 91mm corkscrew, well at least the ocularly challenged people around me do.
The 58mm small phillips is really good with many common electronics like controllers, and the flat head at the end of the file works well for tightening those pesky face plates on light switches and pretty much any other light duty task, good up to medium sized phillips.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

