What's your latest Leatherman?
-
-
I have been carrying an S2 for the last couple of months but some thread here or at the other place peaked my interest in a PSTII. Won one on the bay and received it today. I had a PST from 1995 or so but it's long gone and I have had other newer Leathermans and Vics since then. I really dig this minimalist simple design. It's ~1oz heavier than my S2 but has some pluses over it I think. I'll see if pocket carrying it becomes annoying.
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
-
How come I didn't see all these replies

Anyway, a BO Wave is arriving tomorrow. My last pay cheque for the month
Till the end of the month I'll be eating cut wire, sliced paper, screw salad with WD40 dressing.. 
[A good way to drop some kilos :D:D]

-
@N_N_R said:
How come I didn't see all these replies
Anyway, a BO Wave is arriving tomorrow. My last pay cheque for the month
Till the end of the month I'll be eating cut wire, sliced paper, screw salad with WD40 dressing.. 
[A good way to drop some kilos :D:D]

The WAVE is a great tool and the BO makes it just that much better.

-
@pingu said:
A Kick with a bit of a kick.Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade

-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade

Did you put a file in instead?
-
@APS said:
I have been carrying an S2 for the last couple of months but some thread here or at the other place peaked my interest in a PSTII. Won one on the bay and received it today. I had a PST from 1995 or so but it's long gone and I have had other newer Leathermans and Vics since then. I really dig this minimalist simple design. It's ~1oz heavier than my S2 but has some pluses over it I think. I'll see if pocket carrying it becomes annoying.Very cool APS. I hope you're liking it as much as I am mine.
It shouldn't be annoying carrying it... it's a minuscule amount longer and much thinner. -
My OHT has arrived!

-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade

Did you put a file in instead?
It's first format had the large and small bit drivers out of a Wave,as well as scissors . The bit driver was scavenged for the P.U.G
It now has the large flat driver and Phillips/scissors,small bit driver and small flat driver,with a spacer.
I've never been able to get a hold of a spare file to drop into it
-
A Kick with a bit of a kick.
Scissors transferred from a Fuse. The cap lifter had to swap handles with the lanyard ring to make sufficient room for the scissors but an unanticipated bonus there, my nails couldn't reach the cap-lifter inboard nail nick but now the nail nick is outboard, though unlike the main blade it doesn't quite align with a finger groove. But this is one occasion when clumping is a benefit. I think LM could have done better with an aligned outboard nail nick on the Kick/Fuse cap lifter.
I love the completely smooth snag-free exterior of the Kick when folded. Given it is legal UK carry I'll alternate EDC with my Juice S2.
(just realised I didn't picture the lanyard ring but it is there outboard of the scissors)
I went the whole hog and dropped the blade

Did you put a file in instead?
It's first format had the large and small bit drivers out of a Wave,as well as scissors . The bit driver was scavenged for the P.U.G
It now has the large flat driver and Phillips/scissors,small bit driver and small flat driver,with a spacer.
I've never been able to get a hold of a spare file to drop into it
I like the idea of a more useful Kick for use in the UK - adding a file would be very nice and maybe scissors too if I can squeeze them in. I'm going to try a SOG file first because you can get them from Heinnie.
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
-
Nice one! PST, the original and the best!

-
@RimfireNZ said:
I just scored an as-new original PST here in New Zealand for just over $20USD...No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
-
@RimfireNZ said:
I just scored an as-new original PST here in New Zealand for just over $20USD...No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
That sounds like a great score man

-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
Have you been keeping an eye on loftynz on Trademe Zoidberg? I don't know where he gets all his stuff from.
I just bought a bunch of damaged SAKs from him for some spare parts for mods (scissors and rear phillips drivers). No idea where he gets this amount of stuff from.
-
I just scored an as-new original PST here in New Zealand for just over $20USD...
No pictures yet as I don't get it until Thursday.
Very excited as I've been EDCing my '03 PST2 for the last week and have been loving it.
Nice. :) I got stuck at work and missed out on the Gerber. :(
Have you been keeping an eye on loftynz on Trademe Zoidberg? I don't know where he gets all his stuff from.
I just bought a bunch of damaged SAKs from him for some spare parts for mods (scissors and rear phillips drivers). No idea where he gets this amount of stuff from.
Kind of, sometimes. Too many watch him so deals are harder to get. You did well.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login