pocket can opener
-
Depending on what you use the awl for, maybe instead of using the one from the Rebar, you can make the can opener sharper, say, like a Wenger can opener? That would be usable as an awl, I'd say?
-
Oo good idea. Not going to have any idea what to call my wave after all this... already has charge tti stuff, rebar stuff, wingman scissors, kick bit... Now possibly SAK stuff lol..
-
How about a P38? Or better still,a 84mm SAK? Alox Bantam would be a wicked choice!
-
How about using a P38 or P51?
(You just beat me to it Kirky!)

-
@firefightingjosh said:
So as most know I'm doing even more mods to my wave. Right now I'm putting a fixed philips bit in and also keeping the bit driver, flathead fixed, and rebar awl. This means I have to make more room and so the can opener is going to go, as long as I can find one to pocket carry or put in my lm sheath. Any ideas on one? Found lots of bottle openers that are small, but can openers seem difficult to come by.Josh
How about a p38 it's small and folds flat, killer little opener.

Sak's rule !
-
Looks like my local surplus store carry's them. Will grab one monday! Thanks guys! Really surprised none of LM's pocket tools have can openers.. You would think they would put them on the brewzer or one of the nine new tools.
-
@firefightingjosh said:
Looks like my local surplus store carry's them. Will grab one monday! Thanks guys! Really surprised none of LM's pocket tools have can openers.. You would think they would put them on the brewzer or one of the nine new tools.I do not need to open bottles or cans on a regular basis, just once in a while.
so, with that said, I bet I could open a bottle with a can opener a lot easier than I could open a can with a bottle opener. so if you are going to have just one, I choose the can opener.
-
The P-51 is a bit bigger than the 38, and easier to use I've found. I keep one on my keys along with a Craftsman 4-way screwdriver.

-
I'd certainly recommend a Victorinox Cadet (or similar small SAK). So much easier to use, so much less likely to stab you in the leg (or elsewhere :ahhh :ahhh :ahhh) plus all the other great tools that come with it.
-
@50ft-trad said:
I'd certainly recommend a Victorinox Cadet (or similar small SAK). So much easier to use, so much less likely to stab you in the leg (or elsewhere :ahhh :ahhh :ahhh) plus all the other great tools that come with it.I put a small safety pin through the hole in the hinge on the 51, keeps it closed. No risk to your dangly bits that way..... :)
-
@jerseydevil said:
The P-51 is a bit bigger than the 38, and easier to use I've found. I keep one on my keys along with a Craftsman 4-way screwdriver.
Like these .... P38...... P51

Brüder, die Brüdern Helfen
-
@super m said:
The P-51 is a bit bigger than the 38, and easier to use I've found. I keep one on my keys along with a Craftsman 4-way screwdriver.

Like these .... P38...... P51

Brüder, die Brüdern Helfen
Exactly!
I made my post from the train home after work, so didn't have them handy for a pic. :) The P51 is a useful little thing, I've used it as a scraper, screwdriver, prybar, and clamshell pack opener, amongst other things. It even opens cans! ;) -
I don't think I've ever needed a can opened with my EDC kit; I basically never open cans when I'm outside of my own kitchen. In my kitchen, I use a P-51. I figure, the P-51 works great for a dollar, any other can opener is a waste of money. Especially those electric ones.
-
@av8r1 said:
I don't think I've ever needed a can opened with my EDC kit; I basically never open cans when I'm outside of my own kitchen. In my kitchen, I use a P-51. I figure, the P-51 works great for a dollar, any other can opener is a waste of money. Especially those electric ones.My can opener isn't expensive or electric. Is kid friendly and cuts from the side.
No sharp edges. Lid fits back onto the can. Quick, safe and comfortable to use. -
I would say a p51 can opener... But everyone beat me :P
-
How about a F.R.E.D.? :D
<a href="http://s1195.photobucket.com/user/list3r/media/IMAG0229.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1195.photobucket.com/albums/aa396/list3r/IMAG0229.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
That's pretty slick.

-
I had to ditch the opener off my Charge, now I use the blade to open cans.

-
@50ft-trad said:
I'd certainly recommend a Victorinox Cadet (or similar small SAK). So much easier to use, so much less likely to stab you in the leg (or elsewhere :ahhh :ahhh :ahhh) plus all the other great tools that come with it.
I put a small safety pin through the hole in the hinge on the 51, keeps it closed. No risk to your dangly bits that way..... :)
Old pic from a few years ago showing how I used a bit of bicycle inner tube ...


I carried it like that for a while, but it never got used so I ditched it :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

