3d Philips bit on wave.
-
Got it!


Just gotta finish removing the bo off the Philips driver. No grinding was req to clear the pliers.
Sent from my iPhone using Tapatalk
-
Good work

-
Nice, glad you got it sorted.

-
nice work!
how'd you fix the locking issue? were you able to reuse/replace the rivet holding the blade pin mechanism in place? -
Just reused the rivet by smashing it it down to make it secure. Adding some final touches now. It is a bit gritty, so im pulling it all apart again and polishing the pivot area and lubing it well.
Josh
-
glad to hear it! it's nice to know that can be repaired. ;)
I can't believe there was no grinding required on the Phillips driver... I might have to give this another shot!

-
Well not the locking system, just the little safety things that keep the knives closed while the pliers are open... Was a pretty simple repair once I studied it some more. Yup the key is just bit placement to get the 3d bit to fit along with the bit driver. You have to remove two tools to do this though. I chose can opener and the mini bit driver(since you can just put it where the pocket clip goes..) I have pics throught this modded and other mods I have done. Trying to build a how to on this. Just a heads up this is no where near a perfect mod. The bits fit pretty dang tight, but feel like they will and have loosened up with some working of the tools. I may also replace the flat driver the wave came with, and install the longer smaller one from the rebar for recessed places.
-
when I tried it, I think I removed the large bit driver and had the 3D Phillips placed next to the can opener... maybe some mixing and matching would help?

like I said, this was awhile ago, so I should probably give it another shot. :)
-
I wonder if it was sitting on the little bump that stops the tools lock tab from being pressed in too far?
-
hmmm... you could be right, zoidberg. I'll keep an eye out when I try this again. my modding skills have improved quite a bit since the last time I attempted this. ;)
-
The large Phillips should go by the can opener or the small bit driver, the large flat driver is thicker.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login