[CLOSED] Gingrich Tactical Custom Knife Giveaway
-
That's a damn fine knife JA!!

-
Mini-Onslaught with custom "Nut Job" and and my family name is clearly visible on the blade.

-
That's a damn fine knife JA!!

Thanks derekmac I put a lot of thought into it. It's just about perfect except it turned out so nice I baby it. It was supposed to be my work blade. That's ok though because it cost way to much to wreck at work.
I don't blame you -- I'd do the same thing. ;)
beautiful knife, I really like the way it turned out.
-
Woah. :o
Not sure if this counts as custom, probably not, but anyway...
Just a regular spartan configuration, but I think the blade was exclusive to the Victorinox road tour they did a few years back, and the soft touch scales. Best part is I made it myself, with official tools. ;)

-
I don't really have any customs other than some one off hack jobs of my own making, but if I could wish...
The basic concept is a Ka-Bar Mk2, also known as the Marine model. 1095 steel, keep the width and the fullers, but only 5" long and sharpen and serrate the clip. Jimp the spine with a at least one cut out deep and square enough to strike a ferro rod, like the "shango" notch on the the TOPS BOB knife. Leave the blade bare, I'll put a patina on it. Take the top off the cross gaurd, but keep the lower part of the gaurd as is and the pommel the same hammer butt. Stacked leather washer handles are for the win at ten below zero, put a wider, deeper groove at the pommel, for a lanyard if I want one, but DO NOT shorten it like Ka-Bar did with their mini.
Package it with a couple sheaths. One slim leather with a wide belt loop(I like to carry my knife inside my belt with the gaurd at the top of the belt line and the ability to cant it some is a wonderful feature), another one like that but with an altoids tin sized pouch on the other side of the tunnel belt loop (so when I'm carrying the knife, the knife and it's sheath are again inside of the belt, and I have a small kit outside of that). And a basic black kydex that I can put a loop on or attach to molle gear or hang in a mercharness-style rig.
-
Thanks GT for the great prize.

I entered the hawk giveaway with a grandad related story, thought I would do the same for this one.
Twenty plus years ago I was in the garage working on an old piece of stainless when grandad walks in.
After watching for a minute he starts digging in a bin and comes up with the end of a broken saw.
He handed it over explaining how it will take a good edge and make a better slicer.
It's a bit random but I felt it was right to keep a couple original saw points.Here it is with another semi custom I put together, the Grand Super Tinker.
-
Man I wish I had the money to buy a custom or the skills to make my own. My goal is to do something kinda traditional, a sgian dubh but with 154cm blade and a bog wood handle. I want the family motto inscribed on one side of the blade and the family crest on the other. Would go great with my kilt!!
-
@zoidberg said:
Thanks GT for the great prize.
I entered the hawk giveaway with a grandad related story, thought I would do the same for this one.
Twenty plus years ago I was in the garage working on an old piece of stainless when grandad walks in.
After watching for a minute he starts digging in a bin and comes up with the end of a broken saw.
He handed it over explaining how it will take a good edge and make a better slicer.
It's a bit random but I felt it was right to keep a couple original saw points.that's a great use of a broken saw, and a really cool story to go with it.

can I ask what you used to grind/reshape the broken saw blade?
-
Here is one I made for myself :D :D
I would love to get a proper custom folder to use regularly

Thank you for the opportunity to win one

-
Another excellent giveaway from Gingrich
It's a lovely knife, but I have more knives than I need already, so I'll refrain from entering so someone more deserving gets thisHere's some of mine ...

First off, a custom knife I won in a giveaway right here at MT.O, made by none other than out very own Ray Kirk of Raker Knives. This is a lovely knife, and a real piece of art that my piccies fail to capture

Next up is one that I made myself under the watchful eye of a UK knifemaker. I spent three days with him in his workshop, under his tuition and made this out of 01 toolsteel with cryogenic quench. I really enjoyed those three days, pregrinding the blades, heat treating, finish grinding, and making/fitting the handle, bolster and sheath.

I also had some time left over and made another blank, which he then heat treated, blued and forewarded on to me later. I did the ropework handle at home, then sent it up to Scotland to have a custom made sheath made for it

Again, this is not an entry for that lovely knife. I just wanted to sieze the opportunity to show off these three :)
-
Harvey King knife with 3in D2 blade,and walnut burl handle.
-

I've got a number of customs but my favorite has to be my Fiddleback Forge Nessmuk with black burlap grips and orange pinstrip liners
-
Wow!! You guys have some nice blades. Want!!
-
This - a knife I made a while back. A guy running as a semi hobby, semi business, teaching and helping people make their own knives, starting with a steel bar. Took about a day to make, and man is it a fantastic knife!
I'm always undecided about whether to take this one on camps or the like, as part of me wants it to be a collectable because of the sentimental attachment - and part of me wants to use it as it's such a great knife!
-
I was considering if I should enter this or not, but a friend of mine really wants this and if I win he'll trade some vintage Soldiers for it, so here goes.
I don't have any real customs yet, but my dream sak would be a 3-layer Alox:
[list type=decimal]-
Blade/Awl
-
Scissors
-
Phillips/Can/Cap
The look would be one of these two examples from Syph:


-
-
Gah! I keep meaning to go borrow my mothers camera so i can take some decent photos for my entry.
alas work has kept e busy (ironically said work is painting her husbands apartment thats going on the market so i talk to her daily at the moment!)Frantically checked photobucket and i have some fuzzy amateur pics.


The 'big one' is called Ani-san ( Elder Brother in japanese) and was handcrafted entirely from scratch by my sister in secret (along with the smaller one which is hers) when she was on contract with Outwardbound in Western Australia. She forged it, shaped it, polished it, carved the handle, made the sheath etc. Whilst i dont have a picture of it she made sure the balance of it was such that you can res the top brass of your handle on a finger horizontally it balances (only the slightest tilt and thats her first knife ever) Her only regret was rushing the staining of the sheath as she was due back in sydney the following week. I eventually plan to remove it so it has the natural look like her one.
As you can tell i'm a little proud of her, she is quite the artist and she took on the project purely cause she knew my love her knives... if you'd like to see some of her other work her FB artist profile is
https://www.facebook.com/tanyaedasilvaAs for customs i want (photos would of really helped here)
I'd love to see a Becker Necker Bk11 in 1095 shrunk down to an Esee Candiru size. I have a stainless Becker Remora and the blade/handle are not the same proportions, also the Remora is more scalpel like with its thin blade whereas the candiru is much beefier making it more micro-survival knife
(Eg Izula mini-me = Candiru, Becker Necker mini-me = santos desired pocket friendly custom)The other desires is a gladius styled 14" big 'un in a d2 steel and convexed edge (similar to the condor combat machete but slightly thicker) in case i ever need to face Trollocs, but its important that it be knife/dagger like as i have the Ji of my people to think about.
-
No customs as yet, but as much as I can enjoy a knife as a piece of art, I enjoy using them as tools.
I'd love to have a sturdy fixed piece, blade length of 2 1/2" to 4", handle at least long enough to get a full purchase grip either forward or reversed. Something meant to be used, that will hold an edge well and is easy to clean and sharpen.
If it's easy on the eyes that's an even bigger plus!
-
She really is a looker.

I like it's blade shape. Pointy and wicked !!!!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





