And so it begins.... (My adventures into Alox!)
-
@HankSolon said:
Yeah, he should.After Cutting out some 93mm brass-liners myself I was a bit stunned by the work, that needed to be done!
Yes last time I made liners I think I was able to cut 56 out of 1 square foot by hand, but that took SOOOOO long I just couldn't bring myself to do that again. :D So waterjetting is the way to go. Next time I'll commit more material now that I now the file is ok.
Here's todays mod project and its something simple yet different.
Pioneer + phillips with can opener ground into a technician screwdriver. :D





This seemed very straight forward but there was one catch. Normally I have a scissors layer in between the blade and openers, but when the triple tool layer is adjacent to the blade layer there is a problem. The slope of the blade matches exactly that of the bottle opener and can opener. This makes the bottle opener nail nick inaccessible.
So, what I did was to custom grind a spring to be just a little raised on the part where the bottle opener contacts. This let it sit just a touch higher than normal in closed position and the nail nick is easily accessible.

-
That looks great.
Soon you will be receiving my order.Sent from my iPhone using Tapatalk
-
When I cut brass liners I use a pair of shears for the "outside" edges, and a Klein Nibbler to rough out the "inside" edges. Goes quite quickly, at least for the bulk metal removal. Still use a Dremel and a belt sander to finish with.
This method is pretty fast, but I still wouldn't want to make more than about 4 liners this way. And the thicker I choose to make the liners, the harder/longer it becomes.
-
I was curious how those matte gray Ti scales would anodize so I gave it a try today. Turns out they anodize just fine, so that gives me more options for Ti color and finish combos.
I also finally got some of the etchant that Im supposed to use to get the brighter colors, so I need to try that next to hopefully get to that nice green color.
-
Nice! I really that semi-gloss finish.
-
I put some more brass into action today.








-
Beautiful combination of green and brass colors!

-
Nice work Syph

-
Beautiful - but I cannot wait for my version of this!
-
Here is another take on the easy open alox mod. This used to be a very well worn pioneer apprentice, but I reconfigured it into a 2 layer with only one tool in each layer.
The idea is the main blade is an easy open pinch blade, but the electrician blade is also available by standard nail nick.
I made custom springs for both layers and the electrician blade one I ground down to the same thickness as the electrician blade so no spacers were needed, and finished it off with a polished brass liner.








-
-
Love the easy open, Syph.

-
Another Urban Ti-oneer today. The only different on this one is I tumbled the scales in rocks for a bit more distressed look, and added a clip.






-
Superb, as usual Robert. You carbidize the contact point on the ti-scales, right?
-
@chivaceae said:
Superb, as usual Robert. You carbidize the contact point on the ti-scales, right?Yup always where Ti and steel rub. That tumbled finish would let it slide for awhile but once it wore down the tools would stick and lose all snap.
-
Those tumbled Ti scales may be your best ones so far IMHO.
-
-
I got an orange cerakote custom back in for an upgrade and it was very interesting to see how it has held up. I put this one together near the end of last year and the owner said it has been used hard and often.




The BO on the tools was fine, but seems to have come of the backsprings most. The alox liners I made held up quite well. I was most happy with the orange cerakote though. It held up very well. Id for sure rate this above standard anodizing for quality and longevity, and Im really happy to have a well used custom to see in person.
Ive actually got another 10 sets of orange coming in from Jeff next week and... a brand new cerakote color for a new custom theme that Ive been keeping secret... :D
-
Orange customs.
Can't wait to see what you have planned. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login