Show off your Sak mod's!
-
nice!! love Yeoman.
-
Titanium scales anodized green
More photos in this thread:/post/917320
-

Finally I could give my Pioneer a red shield! :D
-
I modded a Victorinox Harvester, swapping the main blade for a genuine Victorinox grafting blade. The creation's name: Horticulturist (my profession).
BTW, I decided to use the standard pivot bolts, non-recessed into the scales, as I like the "extra" protection to the scales' finish when in contact with flat surfaces (the bolts protrude over the scales), and more grip to the handles (or so I think).
Raul
-
Very Cool. How is the snap of this blade and is there any play?
If I'm correct, those grafting blades have larger pins inside. Did you do anything with the large pin hole?
-
Nice work chivaceae, looks very good.

-
Thanks guys!
HankSolon: The snap is pretty good, and I am pleased with it. Indeed the pin hole is slightly larger in the florist and grafting blades (I think it is 3.5 mm
), but since I used enlarged holes to accommodate the 1/8" pivots (3.175 mm) I do not perceive any play. I had to "graft" a stop on the backspring to adjust the blade rest when folded, as otherwise it will hit the front end, and the nail-nick will be hidden (below the scale line).Robert (Syph007): Thanks to your crafty skills and your sharing of information on this forum I attempted this my second modification on an alox knife (this 93 mm "Horticulturist"). The first one, which I have yet to show here, is an 84mm cadet, where I just replaced the blade and installed 1/8" pivots. I still have a couple of 93 alox knives to modify, to suit my "rotating" EDC needs and work-related activities (I badly need one yeoman-like; I do use the magnifying glass quite a bit). The custom one you made for me is too beautiful as to yet venture to use it at work :D
Thanks again for all your postings and sharing of info on this forum.
Raul
-
Titanium Electrican & Titanium Soldier

-
@chivaceae said:
I had to "graft" a stop on the backspring to adjust the blade rest when folded, as otherwise it will hit the front end, and the nail-nick will be hidden (below the scale line).Interesting. But you didn't do any photo of this? :)
I have seen several solutions here (some I have done):
Stopper integrated at the other end: here
Stopper using the 4th pin: here or hereYours should be new here, since you integrated a stopper at the end where the tool is pinned (the blade rest). If I understood you right.
-
Victorinox White Groove Soldier Plus



-
Very nice!
Did you use a Sentinel to combine the Slidelock opener layer with the linerlock blade?
I really like the outcome. -
Looks nice, but is that a long gap I see between the rear liner and the red inner scale?
-
I had to "graft" a stop on the backspring to adjust the blade rest when folded, as otherwise it will hit the front end, and the nail-nick will be hidden (below the scale line).
Interesting. But you didn't do any photo of this? :)
Yours should be new here, since you integrated a stopper at the end where the tool is pinned (the blade rest). If I understood you right.
I did not take a picture
However, I borrowed the idea from Robert (see below a copy of his photo on this), whose execution on this stop/rest is superb. Mine was not as neat but it is hidden from site, and does the job (I used a dremel w/cutting disc to cut an inverted trapezoid - a dovetail, on which I slid the piece of scrap backspring cut to fit - sort of like they do front sights on 1911 semi-auto guns).
-
Weird! The side liners look like they are wavy too (left to right, as opposde to up and down) - Optical illusion I guess
@chivaceae said:
I modded a Victorinox Harvester, swapping the main blade for a genuine Victorinox grafting blade. The creation's name: Horticulturist (my profession).Isn't that bump on the top of the grafting blade also a blade
I assume it sticks out? Would this cut you if you grabbed it the wrong way in your pocket? -
@ all: Thank you all for your positive feedback!

@ lowtech: I took a Sentinel with plain blade and the Linerlock, the rest comes from a Victorinox Outrider.
@neillcurie: Since the knife has a linerlock there has to be a gap between the sclae and the liner to keep the knife locking.
-
@chris.customworks said:
@ lowtech: I took a Sentinel with plain blade and the Linerlock, the rest comes from a Victorinox Outrider.
@neillcurie: Since the knife has a linerlock there has to be a gap between the sclae and the liner to keep the knife locking.You could also consider a Linerlock model with a double lock (for the blade and for the bottle opener). It would be like:
--- scale ---
scissor layer
--- liner ---
OHO blade layer
--- double liner lock ---
Opener layer (with lockable bottle opener)
--- scale
I prefere the larger bottler opener much more than that smaller version. -
Flower Farmer for the lefthanded
The scales are anodized orange / grey, the liners are anodized red and green, the screws are titanium.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login