Small leatherman?
-
If we knew what kind of size you are looking for, it would be a bit easier. If we're down at keyring-size, here's another one that can recommend the Squirt P4. When I first got it, I was actually disappointed; it was way smaller than I thought it'd be, but now it's the only MT I carry when I'm at work, unless I know that I'm for some reason gonna need something bigger. It saves me a lot of trips down to the workshop, to get the "right" tool.
If you're going for something bigger... Well, I would actually recommend the one you already have - get either a pocket clip or a quality sheath for it, and you should be good to go. Admittedly, I've never handled a Wave before, but it's pretty high on my wishlist. Either that, or a Wingman.
If that's still too big... I'd say you need something from the Juice-series. The old Juice-series, that is. The new ones aren't exactly pretty and IIRC the quality has been dropped a notch on the new models.
-
My preference in this department is the Skeletool/CX. Sold my CX to try a Juice, ended up reversing that about a month later.
-
Small with a clip ( tho not a deal breaker )
, I'd also say Skeletool or one of my 2 favorites........ Juice S2 or Squirt P4. The Juice will fit in your 5th pocket and quite literally disappear same with the Squirt. -
@Aloha007 said:
Small with a clip ( tho not a deal breaker )
, I'd also say Skeletool or one of my 2 favorites........ Juice S2 or Squirt P4. ** The Juice will fit in your 5th pocket **and quite literally disappear same with the Squirt.I would say it will fit in some peoples 5th pocket. I have seen people put a Wave in the fifth pocket, but for me a juice will barely fit and get stuck if forced in. Horizontally that is.
-
Fair enough Capt
. -
I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
-
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
Makes sense as not all 5th pockets are same size. I remember someone here who was able to put a mid size LM in theirs. I have some GAP jeans that fit the Juice perfectly and now that I think about it I don't know if its the same in my Carhartts

-
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:D -
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:DAre you referring to the pocket mod I did to my pants a long time ago or are you just being dirty?
:D -
I used to EDC a surge in fifth pocket.
http://forum.multitool.org/index.php?action=dlattach;topic=49951.0;attach=116457;image -
@captain spaulding said:
@captain spaulding said:
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:DAre you referring to the pocket mod I did to my pants a long time ago or are you just being dirty?
:Dweeeellllll you see what had happened was, I was being >:D
-
@captain spaulding said:
@captain spaulding said:
[quote author=Aloha007 link=topic=53738.msg927220#msg927220 date=1406996950]
Fair enough Capt
.I just figured I would mention it.
I wish I could fit the Juice in my fifth pocket. It would make for a amazing pocket to carry it in. I always wish I had a 4"-5" slim pocket in between my front right and back right pocket. It would be perfect for multitools and/or folders.
and an inside pocket for my Surge just to one side of the inseam, you know,
>:DAre you referring to the pocket mod I did to my pants a long time ago or are you just being dirty?
:Dweeeellllll you see what had happened was, I was being >:D
[/quote]
Alright! -
@jeremy1517 said:
Which small leatherman do you all recommend?I have a Wave and want a nice small pocket model. I prefer a clip but not required.
I also want a blade that is on the outside, if there is a model.
What is the best model?
Jeremy
If you are looking for a small tool to accompany Skeletool, a Micra would fit the bill.
Skeletool has outside blade and most large drivers, while Micra would offer you scissors, tweezers and small drivers for those precise tasks.
Together, they make a good Urban light duty combo
-
The Micra gets my vote..
-
Love my Style CS :D I find it to be one of the most useful, versatile and best quality tool I use on a frequent basis. I understand that the Micra has more tools, but to me, those tools aren't very useful. The outside opening of the implements on the CS trumps the Micra all to hell IMO.
That said, I do own several Micras and like them very much. I just happen to prefer the CS.
-
I haven't tried the Skeletool CX but do think I would like it.
Wanna borrow one?
Yeah nar, it might come back hacked. :P Thanks though.
What is your opinion of it, good/bad/other?That might be a good thing. ;)
Firstly, I don't need to EDC a multitool. I got it when I worked at the zoo and it was handy then.
Pliers/wire cutters: As everyone says, for light duty. I would rather have something beefier for fencing wire. I would like the pliers to be spring-loaded.
Knife: I really dig the blade and how easy it is to deploy.
Bit driver: I have probably used this the most, especially one day dismantling and reassembling a whole lot of office furniture with allen and robinson fastenings with the help of the bit kit.
Pocket clip: enables the tool to slip nicely into your pocket, hardly notice it's there.I got the CX more for the better quality steel/PE blade; I don't really care about the carbon fibre and I think the plain Skele actually looks better - more terminator-ish. I'm thinking about making a new part to store both bits out of aluminium which I think would look better.
I really like the design and feel of the Skeletool.
-
I haven't tried the Skeletool CX but do think I would like it.
Wanna borrow one?
Yeah nar, it might come back hacked. :P Thanks though.
What is your opinion of it, good/bad/other?That might be a good thing. ;)
Firstly, I don't need to EDC a multitool. I got it when I worked at the zoo and it was handy then.
Pliers/wire cutters: As everyone says, for light duty. I would rather have something beefier for fencing wire. I would like the pliers to be spring-loaded.
Knife: I really dig the blade and how easy it is to deploy.
Bit driver: I have probably used this the most, especially one day dismantling and reassembling a whole lot of office furniture with allen and robinson fastenings with the help of the bit kit.
Pocket clip: enables the tool to slip nicely into your pocket, hardly notice it's there.I got the CX more for the better quality steel/PE blade; I don't really care about the carbon fibre and I think the plain Skele actually looks better - more terminator-ish. I'm thinking about making a new part to store both bits out of aluminium which I think would look better.
I really like the design and feel of the Skeletool.
Thanks.
You're not at the park anymore?
So get the plain skele and swap in the cx blade. Got it.
-
I haven't tried the Skeletool CX but do think I would like it.
Wanna borrow one?
Yeah nar, it might come back hacked. :P Thanks though.
What is your opinion of it, good/bad/other?That might be a good thing. ;)
Firstly, I don't need to EDC a multitool. I got it when I worked at the zoo and it was handy then.
Pliers/wire cutters: As everyone says, for light duty. I would rather have something beefier for fencing wire. I would like the pliers to be spring-loaded.
Knife: I really dig the blade and how easy it is to deploy.
Bit driver: I have probably used this the most, especially one day dismantling and reassembling a whole lot of office furniture with allen and robinson fastenings with the help of the bit kit.
Pocket clip: enables the tool to slip nicely into your pocket, hardly notice it's there.**I got the CX more for the better quality steel/PE blade; I don't really care about the carbon fibre and I think the plain Skele actually looks better - more terminator-ish. I'm thinking about making a new part to store both bits out of aluminium which I think would look better.
**
I really like the design and feel of the Skeletool.Ínstead of that, I believe you can get a Skeletool CX blade from Texas ToolCrafters on Ebay, they fit right into a standard Skele ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login