84mm Alox Cybertool w/ 91mm scissors (WIP) (Pic heavy)
-
Simply superb work Glynn.

-
Rather than sheets of brass perhaps a lump of aluminium could be fashioned to fit. Easy to work with and you're more likely to have a scrap bit of aluminium than scrap brass kicking around. Old cookware, hard drive enclosures, ladder rungs* It'd match with the scales as well

- can make you unpopular if ladder is still used.
-
Also dont forget you can sandwich layers of thin sheet metal to make bigger pieces and they are easier to cut... you just need lots

This is so awesome, but extremely labour intensive, but it goes to show that any of the other 91mm tools are possible candidates. Someone is coing to decide that their 91mm metal saw, fish scaler or pliers are simply to big and need to scale it into a 84mm package

-
That some amazing work there, have to agree while I like the wood, I wonder if either brass or aluminium would give it a more finished polished factory look ?
OR even layered carbon fibre so could have space for tooth pick and tweezers from a 58mm sak ?Just thoughts
Richard
-
I'd go with a piece of hardened 6061 aluminum or titanium, or 12 GA stainless is already the right thickness at 0.105 inches thick.
But prototyping with wood makes alot of sense since it's cheap and easy to work with. I kind of really like the idea actually for prototyping. I need to make a cybertool bit holder for my 93mm alox mod and I think wood would work for a quick mock up, then I can pin it to some metal and mill that prototype shape in metal using the wood as a guide.
-
Or you could use a old broke blade. I've done this more than once and that way it's already a perfect fit (for the stop only).
-
What I found was like you hole drilling in the scissors was key. I have about 10 of the older style 91mm scissor springs (non hook type) and they can actually be cut to fit the 84 mm frame perfectly. I was blown away when I figured that out. I'm not quite done, just proved to myself it works, but I will update with pix to show what I did.
Now I'm going to have to dig through my parts boxes and see if I can find any of those older 91mm scissors springs you're talking about. :ahhh
Making this work on the smaller springs I'm currently using is a lot of busywork/trouble/(fun!), but having a spring that would eliminate most of that would be awesome, though I guess the added problem of having to drill all the tools out for the larger holes/pins might offset that. Be nice to find some thin brass/copper/something tubes to resize the holes, maybe just some rolled up brass sheet of the right thickness would work..
Anyway, pics please!
Here you go Glynn. I was going to wait until my mod was done to post these, but they are relevant to your thread since we both have the same goal of getting 91mm scissors on an 84mm frame.
This one is for my 84mm hard anodized urban pioneer with scissors. So it will have awl/blade - scissors - openers with brass liners and hard anodized black scales. It was a challenge mod for me to see if it was possible.
This is a rough fit up to prove it works, I still need to sand/polish/buff but it absolutely works. The 84mm spring I made is from a single 91mm spring. It's possible to cut it better than I did to have more spring contact between the rest and spring, but this one works fine, I'm just being picky for the next one I make. The great thing about using a scissor spring is its the perfect thickness for scissors!
Cheers, and keep on modding and posting your work too please, love to see it!



-
@Neil said:
Rather than sheets of brass perhaps a lump of aluminium could be fashioned to fit. Easy to work with and you're more likely to have a scrap bit of aluminium than scrap brass kicking around. Old cookware, hard drive enclosures, ladder rungs* It'd match with the scales as well
- can make you unpopular if ladder is still used.
There's a 40 foot aluminum ladder out back, I guess I could try.. Where's the best metal: from near the top of the ladder, the bottom, or right out of the middle? OR.. maybe I could use the whole thing! All new 12192mm SAK with a ladder layer! Also, the gaps are big enough you could fit all sorts of other tools in the extra spaces! The ultimate 2 person EDC? If I work at it, should be done by next Sunday.

@Santos said:
This is so awesome, but extremely labour intensive, but it goes to show that any of the other 91mm tools are possible candidates. Someone is coing to decide that their 91mm metal saw, fish scaler or pliers are simply to big and need to scale it into a 84mm package
Metal file/saw is probably possible, since the size is about right, if you can get a hole drilled through it, I'm guessing it's hardened more than some of the other tools?
Fish scaler very likely to work as well, though I don't have one sitting around atm, so I can't compare. Same with the wood saw.
Pliers though.. I doubt it. It's longer than the scissors by 4-5mm, at least, and the scissors barely fits. You could probably round the tip off saving a few mm, but I don't think even that would be enough. I think pliers will have to stay on the 91mm+ frames.@Syph007 said:
Here you go Glynn. I was going to wait until my mod was done to post these, but they are relevant to your thread since we both have the same goal of getting 91mm scissors on an 84mm frame.Thanks! I do appreciate it. It's nice to have some comparison to work with; alternate ways of doing things. And, it's good for anyone else trying the same thing, the more pics the better!
-
Wow! I missed this thread, 91mm Scissors and Cyber Bit-Driver in 84mm

That's Amazing!

-
Sorry for bumping an old thread, but I'm probably going to attempt this 91mm scissor conversion, and I wanted to get it right on the first try. I firgure its better to keep the discussion in one thread if people are searching for info on this mod. (like I have been)
I'm hoping that someone can sanity check my plan before I start grinding.
My plan is to grind the tang 7.5mm wide (similar to a Cadet nail file). This means that it should work with a standard 84mm knife layer backspring (with a custom rest/spacer at the other end); though I still have to figure out what to do about thickness, as the scissors are 0.15mm thicker than a sissors layer.
Since I want to keep the griding as simple as possible, so my plan is to drill the new hole (carbide bit) slightly off-center from the original hole, so that after grinding a straight bottom edge, the new hole will be centered in the 7.5mm tang. Then, grind the notch so that doesn't interfere with the backspring when opened.

I'm probably going to use a dremel & grinding wheel to do the grinding and finish with a diamond burr. I have considered putting the grinding wheel bit in the mill and trying to take small passes with it to insure a straight edge grind-- but I'm not sure how well this would work.
Thanks for any suggestions.
-
-
-
-
-
@Don Pablo said:
A tragedy that the pictures for this stupendous mod are gone.
It deserves to be seen.I was thinking of attempting to recreate this awesome cybertool mod.
Doesn't seem like anyone else has done it since Glynn.I started reading from the top and thought "man, I wish there were still pictures!" Then I got to your comment. It would be great to see this. 0lease do post your project. Can I recommend you do it as it's own discussion (link to here included) so that no one opens this and skips it for no pictures?
-
@DavZell said:
I started reading from the top and thought "man, I wish there were still pictures!" Then I got to your comment. It would be great to see this. 0lease do post your project. Can I recommend you do it as it's own discussion (link to here included) so that no one opens this and skips it for no pictures?I wrote that when I had prospects of making use of some equipment, but that didn't pan out so it didn't go anywhere.
I'll revive it and let you know if I ever get appropriate equipment.
In the meantime, if you or anyone else does this sort of thing I'll be VERY interested and cheer you on.
-
@Jake said:
Sorry for bumping an old thread, but I'm probably going to attempt this 91mm scissor conversion, and I wanted to get it right on the first try. I firgure its better to keep the discussion in one thread if people are searching for info on this mod. (like I have been)I'm hoping that someone can sanity check my plan before I start grinding.
My plan is to grind the tang 7.5mm wide (similar to a Cadet nail file). This means that it should work with a standard 84mm knife layer backspring (with a custom rest/spacer at the other end); though I still have to figure out what to do about thickness, as the scissors are 0.15mm thicker than a sissors layer.
Since I want to keep the griding as simple as possible, so my plan is to drill the new hole (carbide bit) slightly off-center from the original hole, so that after grinding a straight bottom edge, the new hole will be centered in the 7.5mm tang. Then, grind the notch so that doesn't interfere with the backspring when opened.

I'm probably going to use a dremel & grinding wheel to do the grinding and finish with a diamond burr. I have considered putting the grinding wheel bit in the mill and trying to take small passes with it to insure a straight edge grind-- but I'm not sure how well this would work.
Thanks for any suggestions.
I have successfully made a backspring for a scissors in G-10. It holds up well and is snappy . If you are making the scissor in a separate layer anyway, it could be worth trying *tip for any one

-
I can’t see the pics of this, what sounds like, spectacular mod…feel like I’m missing out!
-
Long shot, but has anyone else done this mod or have access to the original pics? Wayback Machine was a bust. I can’t get enough alox scales. Maybe a 93mm CyberAlox would be easier…?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
