What did you use your Leatherman for today?
-
Used my Fuse to open a paint can with a stuck lid. All prying under the rim did was unroll it.
-
I used my TTi today to change a 3 amp lighting plug. But while I was on vacation, my Leatherman was very popular for cutting bread for cheese. We had regular knives, but that's not the point! :D

-
Driving my wife nuts.

I compared the flik of my OHT with the new arrived Gerber MP 600 for hours. :D
-
Used my kitchen draw dwelling Original Supertool, to remove a clump of hair that was blocking my dishwasher water pump.

-
@Lichtbote said:
Driving my wife nuts.
I compared the flik of my OHT with the new arrived Gerber MP 600 for hours. :D
Which tool was the winner?
Sent from the land of the long white cloud.
-
Driving my wife nuts.

I compared the flik of my OHT with the new arrived Gerber MP 600 for hours. :D
Which tool was the winner?
Ouch, whatever answer i will give, it will be a walk through a minefield, right?

Both tools were new/nearly unused, so both needed some breakin on all their joints/pivots. Cleaned them first, then after the some hours i gave them another cleaning to get rid of the black stuff they were oozing out, then re-oiling and so on and so on.
For the pure flik - the leatherman OHT wins with waving banners. It fliks out that smooth .... the 600 moves rougher and so it sounds, also.
Same goes for putting the pliers back in - OHT is way smoother than the MP (wich often needs to be pushed in by hand instead of slipping in by gravity), but the OHT has the habit to stuck on the 2 release pins, then it needs some wiggeling before it slides back in.
-
Driving my wife nuts.

I compared the flik of my OHT with the new arrived Gerber MP 600 for hours. :D
Which tool was the winner?
Ouch, whatever answer i will give, it will be a walk through a minefield, right?

Both tools were new/nearly unused, so both needed some breakin on all their joints/pivots. Cleaned them first, then after the some hours i gave them another cleaning to get rid of the black stuff they were oozing out, then re-oiling and so on and so on.
For the pure flik - the leatherman OHT wins with waving banners. It fliks out that smooth .... the 600 moves rougher and so it sounds, also.
Same goes for putting the pliers back in - OHT is way smoother than the MP (wich often needs to be pushed in by hand instead of slipping in by gravity), but the OHT has the habit to stuck on the 2 release pins, then it needs some wiggeling before it slides back in.
Sorry, that wasn't meant to be loaded. I haven't had either tool and was just wanting an opinion. Thanks.
-
My Sidekick-X's scissors got used to cut a bunch of mudding tape in our future living room.
-
My wave had plenty of use today. I used it to fix the hinge on my iPad case, bend metal brackets in place at work, and cut rope and zip ties while mounting a baby gate.
-
Welcome to MTO Nate.barker37
Sounds like a busy day today for your Wave 
-
Thanks Monrogue!
-
I used my Rebar's pliers to undo some bolts in our shop's air compressor housing in order to get more airflow to it. It keeps overheating. Tech should be here next week to actually fix the dang thing.
I also used the Rebar's awl to ream a hole in the wall to run some new ethernet cable to a new office. That awl is so great to have on me, I use it quite a bit.
-
Used my Rebar to change a tire...on my daughter's tricycle.
-
@Nate.barker37 said:
Thanks Monrogue!Greetings to the nate barker.

-
Today I used my LM Surge to remove my front case fan for cleaning and also installed two new WD Red HDD for storage. Just breaking it in :)
[url=https://flic.kr/p/oqcVFH] -
used the Pulse today to take a cubical apart
-
Sidekick-X's scissors cut more mudding tape. Supertool's pliers pulled a couple curtain rod attachment brackets and the Phillips for removing a couple blind attachments.
-
I used my rebar a few times today to trim wire from one of our Mig welders after I bumped the trigger(too many damn times to count, I'm not a great welder) and used the pliers to pry slag off the tip. I was modifying a splash guard I designed for our horizontal band saw, it had one leak I missed in the design phase.
I have used that rebar's wire cutters to cut some really hard stuff, and they don't look like they've ever been touched. I'm loving this tool for work.
-
@Mercury said:
I used my rebar a few times today to trim wire from one of our Mig welders after I bumped the trigger(too many damn times to count, I'm not a great welder) and used the pliers to pry slag off the tip. I was modifying a splash guard I designed for our horizontal band saw, it had one leak I missed in the design phase.I have used that rebar's wire cutters to cut some really hard stuff, and they don't look like they've ever been touched. I'm loving this tool for work.
Glad to hear the Rebar's treating you well man.
-
I used my rebar a few times today to trim wire from one of our Mig welders after I bumped the trigger(too many damn times to count, I'm not a great welder) and used the pliers to pry slag off the tip. I was modifying a splash guard I designed for our horizontal band saw, it had one leak I missed in the design phase.
I have used that rebar's wire cutters to cut some really hard stuff, and they don't look like they've ever been touched. I'm loving this tool for work.
Glad to hear the Rebar's treating you well man.
it really is. Cant really find an excuse to get a new tool at the moment, the rebar does all i need. That doesnt mean i wont get a new tool though...
Sent from my SM-G900V using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login