I finally did it!
-
@captain spaulding said:
So I tried one of the other screws in the problem hole and it wen't in correctly. I did not think the screw was the issue since it was installed into the original hole fine. I then tried the "damaged" screw on the empty hole and it would not go. I assume it is just the screw now.
I'm still pissed off, but hopefully its a easy fix. I will keep you guys posted.If it's a bad screw that doesn't seem good because what about the hole it came out of - could that have been damaged by it ???
I was thinking the same. I installed the other screw in the hole it came out of and it went in fine. I then took it out and installed it again to make sure everything was good and it seemed to be.
I called Spyderco and they are sending a replacement screw. Hopefully it works out. I am not going to carry it until I find out if it works.
-
The clip on my PM2 worked just fine without the center screw for a while. I dropped one while changing it to lefty.
Spyderco sent a new screw quickly. 
-
@jerseydevil said:
The clip on my PM2 worked just fine without the center screw for a while. I dropped one while changing it to lefty.
Spyderco sent a new screw quickly. 
Yea, it holds fine with two screws, but its the principle of the thing and I don't wan't to have my brand spanking new (expensive) Spyderco running on two screws.
Like sawman said I am worried the defective screw damaged the hole, but it seems alright. Once I get the replacement screws in all should be well (hopefully). Now the long wait.

-
Sorry to hear about the let down, hope Spyderco's screw will come swiftly and everything will be alright. I think a good company should always take care of a good customer, with good quality and service.
-
@captain spaulding said:
I kind of like this though.

that made me laugh too! many funny guesses here :D
and congrats buddy
very nice, just now reading this threadand geez! didn't you have this problem before (quality issues) ?
maybe you should get that rainbow knife :P

-
@captain spaulding said:
I kind of like this though.

that made me laugh too! many funny guesses here :D
and congrats buddy
very nice, just now reading this threadand geez! didn't you have this problem before (quality issues) ?
maybe you should get that rainbow knife :P

If you are talking about on a Para II then no. This is my first.
I did have a very long and extensive back and forth with CRKT and a pocket clip. They kept sending me the wrong one for around 5-6 months I believe.
-
yeah that's it that CRKT fiasco! Mister Pocket Clip
:DI'm glad it's just a screw problem no big deal (they got pills for that)
;) -
@WhichDawg said:
yeah that's it that CRKT fiasco! Mister Pocket Clip
:DI'm glad it's just a screw problem no big deal (they got pills for that)
;)
-
Still haven't got my replacement screws.

-
@captain spaulding said:
Still haven't got my replacement screws.

Might be time for a follow-up call/email. I find you have to keep on smurfholes regularly to get them to do what they're supposed to. I don't know if it's a USA thing or it goes on all around the world...

If I do not get them by the end of the week I will do that.
I just want to carry my damn PM2.
On a side note. I sent Kershaw a e-mail about a replacement clip and screws a few days after I contacted Spyderco and I already got the package from Kershaw.

-
The replacement screws finally came! And they sent me the wrong screws.
WTF is going on. Is it just me? Do I have terrible luck? Are the forces working against me? Is it just terrible customer service?The package the screws came in had "sorry for the delay" written on it. Obviously something is going on in their customer service department. Sounds familiar.

I tried to call, but they are only open Monday-Friday so now I have to wait until Monday to call and wait another 2 weeks.
I'm at the point where i'm not even pissed off just incredible disappointed.Sorry for the crappy pictures.
Original screw
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT One/DSC02389_zps5cefee8b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT One/DSC02389_zps5cefee8b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Replacement screw
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT One/DSC02390_zps0739f5c5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT One/DSC02390_zps0739f5c5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT One/DSC02391_zps9a805f1b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT One/DSC02391_zps9a805f1b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT One/DSC02392_zps6a41dfab.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT One/DSC02392_zps6a41dfab.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
NOT EVEN CLOSE!
-
Wow! Sorry to hear capt. I seem to remember you also having some issues with another tool needing a screw?
-
@mrynnr said:
Wow! Sorry to hear capt. I seem to remember you also having some issues with another tool needing a screw?That was a pocket clip. It took 3 months and 3-4 different clips for them to finally send me the correct one. That's just the tip of the iceberg though. I have had issues with every single company's customer service I have bought knives/MT's from except Gerber and Kershaw.
-
Well, I won't be spending anymore of my hard-earned money on a Spyderco product anytime soon. They're obviously running a SLOPERATION! Who do they think they are, Leatherman?!?!?!?

-
@sawman said:
Well, I won't be spending anymore of my hard-earned money on a Spyderco product anytime soon. They're obviously running a SLOPERATION! Who do they think they are, Leatherman?!?!?!?
I have no idea what is going on around there, but all I know is it's not good.

I don't get how this happens when I specifically told the what knife it was for and double checked before the call was over to make sure they had the correct model.
-
Like, WTF Spyderco?
Customer service FAIL. -
Damn Cap'n, that really sucks. >:( I had a similar experience with Kershaw a few weeks ago, which surprised me, given their reputation. Spyderco has a good rep as well, horrible to see this. I'd be sending a less-than-polite email (which is what Kershaw got after two mess-ups), plus be on the phone on Monday. This is unacceptable IMO.
-
Jeez Capt, you really have been having some horrible luck lately! Fingers crossed your luck turns around sooner rather than later!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
