Wave vs. Rebar
-
I slightly prefer the Rebar, because it weighs a little less in the pocket or on the belt, and because it has a real 3D phillips with some reach. The Wave's outside tools are a bonus, though. You are good either way, depending on what floats your boat. But for me it is definitely the Rebar.
-
Truthfully, the Wave just doesn't do it for me. For some reason I find it hard to motivated to carry it. DOn't know why.... I don't dislike it. I carry a skeletool cx everyday and LOVE it but it's so limited in its tools. Looking for something lighter..... BUT, I also understand that there may not be something that is better than the Wave. I'm looking for a medium duty tool. Not one of the small little things out there......
-
@jeremy1517 said:
I currently have a Wave. I'm not in love with it but I don't hate it either. I've been looking at the rebar.What are your thoughts and opinions on why one is better or different than the other? Why should I buy a Rebar when I already have a Wave? Thoughts???
YI..F.. I'm don't care so much about the outside knife, I carry a blade with me and tend to use it over the MT knifes.
Picking up from where we left off on the other thread I don't like the Wave vs. Rebar question. Really they are complementary though as it happen the Wave liner locked outside blades are not UK legal carry so I don't.
Looking at tool differences, I would say the first main difference is that the Wave has scissors and the Rebar has an awl. The other big difference is that the Rebar has replaceable cutters. Compared with other Leatherman non-replaceable by-pass cutters I have tried (Fuse, Kick, Wave and Juice S2) the Rebar cutter performance is huge on stranded conductor electrical wire, which matters to me. Solid copper conductor, not much difference. Personally I like the Rebar 3D bit driver kit compatibility over the Wave exchangeable bit capability. There are a number of other differences which may or may not matter to you.
So, it's really your call. IMHO, both great tools in different ways.
-
ANy other medium duty tools I should look into, leatherman or other brands?
-
@captain spaulding said:
@50ft-trad said:
Outboard tools work better, be it knives or saw. I also am not a fan of the Rebar plier head, so of a choice between those two it would be Wave.
Maybe for you personally, but that's a very generalized statement. I'm not saying I don't generally agree, but still.
Its a tough decision between the two, but the Rebar has many attributes that make it much different than the Wave. I like the longer dedicated Philips driver much more then the Waves. I like that you get a awl with the Rebar. You do lose the scissors on the Rebar though. I also do not need the tiny eyeglass screwdriver very often so I do not mind losing that in place of a awl. I like both pliers head design, but the 154cm replaceable wire cutters are nice. They do take up a little room in the jaws, but for me it is a non issue. I love the size of the Rebar as well.
Both are great tools, but don't judge one off the other. Each have their own attributes.

Regarding the tools as a whole, the Cap'n is quite right, and in order for you to find the best tool for you, you really need to try them both. Although, I don't think I've seen any arguements against my statement of the knives and saw working better on outboard tools - this is because on inboard tools, the handles are significantly forward of the cutting edges. I do use and carry multitools with the inboard configuration (Gerbers and Leatherman) but these often tend to be ones I've converted to knifeless, which gets rid of that issue. All other tools (drivers, awl etc) this doesn't apply, so feel free to make your own choice. You did say you carry a seperate blade, so again, the knife "thing" might not be an issue. Same if you don't use a saw frequently.
For me personally, the two biggest hurdles are the lack of scissors (which dosn't bother a lot of people) and the plier head as I find the cutters can impede on the main gripping area
@jeremy1517 said:
ANy other medium duty tools I should look into, leatherman or other brands?All of them >:D
What specific tools/features are you looking for, and can to try to pin down what it is you don't like about the Wave (so we don't steer you towards something that will have the same issues)
-
The knife isn't that important. I'm a school teacher and they kinda frown apart the knife deal but it doesn't really matter. I've thought about taking the blades off so that I don't hear about people making a big deal about a MT. Good pliers are important, I'd be really happy if they made a tool with more of a needle nose pattern. I'd really like something that has a prybar or something that could be used as a prybar. Longer bits, flat head and phillips. An Awl. Scissors are nice but not a deal breaker. Doesn't have to be compact. I don't mind carrying in a sheath. Saw is NOT needed. A nice file is nice to have. Those are what I use daily.
-
@jeremy1517 said:
I'd be really happy if they made a tool with more of a needle nose pattern.Well that rules out the Swisstools.
-
@jeremy1517 said:
The knife isn't that important. I'm a school teacher and they kinda frown apart the knife deal but it doesn't really matter. I've thought about taking the blades off so that I don't hear about people making a big deal about a MT. Good pliers are important, I'd be really happy if they made a tool with more of a needle nose pattern. I'd really like something that has a prybar or something that could be used as a prybar. Longer bits, flat head and phillips. An Awl. Scissors are nice but not a deal breaker. Doesn't have to be compact. I don't mind carrying in a sheath. Saw is NOT needed. A nice file is nice to have. Those are what I use daily.Sounds like the Knifeless Fuse might have fit the bill, had the puddings at LM not discontinued it (still missing an awl though)

The bits are certainly longer on the Rebar, so that could be a key issue for you, and yes it does have an awl. The large driver may be used for modest prying (with discretion), so the Rebar might not actually be a bad choice for you based on your list.
-
If you can get past the more needle nose type pliers the Swisstool Spirit X sounds like it would fit the bill nicely for you.
-
@captain spaulding said:
If you can get past the more needle nose type pliers the Swisstool Spirit X sounds like it would fit the bill nicely for you.
The only time the Spirit plier heads have caused me a problem (or have stopped me doing what I wanted) was using them as an improvised electrical cabinet key (Gerber and Leatherman do work quite well for this)
-
@50ft-trad said:
@captain spaulding said:
If you can get past the more needle nose type pliers the Swisstool Spirit X sounds like it would fit the bill nicely for you.

The only time the Spirit plier heads have caused me a problem (or have stopped me doing what I wanted) was using them as an improvised electrical cabinet key (Gerber and Leatherman do work quite well for this)
Interesting and good to know.

-
Rebar.
I understand others may prefer the outboard tools on a multi, but I prefer the inboard. I've never found it to detract from my usage of the pliers and IMHO the blade on the Wave, while in theory is set up for one handed use, it's set up more to slice your thumb print off as you open or close it. But I also carry a SAK, so I have scissors, and a dedicated knife-based mono-tool.
-
@ironraven said:
Rebar.I understand others may prefer the outboard tools on a multi, but I prefer the inboard. I've never found it to detract from my usage of the pliers and IMHO the blade on the Wave, while in theory is set up for one handed use, it's set up more to slice your thumb print off as you open or close it. But I also carry a SAK, so I have scissors, and a dedicated knife-based mono-tool.
What knife do you carry?
-
Spyderco PM2 or Spyderco dragonfly2
-
@jeremy1517 said:
Spyderco PM2 or Spyderco dragonfly2That question was for ironraven. ;)
-
SURGE!!! Oh wait.........:)
That's us mobile.
-
@ducttapetech said:
SURGE!!! Oh wait.........:)That's us mobile.

-
Personally I prfere the original wave as more compact compared to the newer version, plus longer 3d Phillips and better scissors, sadly UK laws mean i rarely carry it,the rebar has become my new companion on bike rides and hikes,
-
I have both, and can confirm what others have stated, two very different yet 'similar' tools.
Rebar follows that original classic Leatherman style and design which isn't everyone's cup of tea these days, while the Wave comes with updated modern OHO design which shows the advancements in MT designs that has just moved on with years.
I like them both and carry them on and off depending more on how I feel that particular day than the function they should fulfill.
That said, these are after all a middle-of-the-road tools, while nice, light and somehow smaller and perfect as EDC, they won't stand up to the tasks their big brothers Surge and ST300 would do without a flinch. This is why for any more serious task I carry my Surge or ST300.
It all depends what do you like and what appeals to you - of course 8)
-
I vote Rebar. I didn't like the Wave either. I felt bad getting rid of it, but after watching it collect dust for over a month, it's off to a new home where it will hopefully be more appreciated. :)
I find the OHO on a multitool for a knife to be kind of over-hyped as a requirement. I guess if all you're going to carry is the multitool, sure. Even then, I don't get why non OHO bothers people so much.
I've heard great things about the Swisstool, but when fondling it at the store, I thought all the tools felt a little... flimsy. I don't know, maybe it's just me but they didn't feel very solid.
The Vic Spirit however, felt great. If only I could find it in the configuration I like.
Good luck in your search. I think the Rebar would do you nicely. Pick up the Rebar + Micra combo set if you find you really have to have scissors.
Pick up a SAK of some sort for scissors and get the mini screwdriver for the cork screw if you find you need the micro screw driver (Victorinox Compact for example).
Don't be against picking up a smaller tool to compliment the MT you go for. It will open up your options more and we all like to have different gadgets.
You come here asking about one tool, we recommend others as well as picking up something else... it's the MT.O way!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
