how about can openers???? useless!!!!
-
We had an emergency in the office the other day. One of my colleagues hadn't realised that the tin of tuna he had brought along as part of his diet, didn't have one of those modern ring-pull things.
Fortunately, I had supplied him with a Leatherman Blast a few weeks prior, and thus, the day was saved. Or at least his diet was, as the only alternative was a dodgy canteen supplied sandwich - phew!
Hurrah for the can opener! :D
-
I'm another vote for more MTs without the can/bottle opener, though I have used them on occasion so I still appreciate them. I'd just rather see the space filled with something else. LM's combo tool works ok for me though since it works as a bottle opener, can opener, awl (to a certain extent), and wirestripper. Still, I'd probably choose something else to fill the space if I had the choice.
Once again, I love the KF4.

-
I like having a can opener. I prefer the can opener to be combined with a bottle opener like Leatherman or with a screwdriver like Victorinox.
I don't use them very often because I EDC a P38. The can opener on a multitool serves as backup.
I'm aware that you can use a knife as a can opener, but I prefer not to because it tends to deform the edge of the blade.
-
Ever since i stopped being a single bachelor, I stopped opening cans for dinner. She knows how to cook, and I can't get away with those super simple eating habits from my single days so I tend to cook more often too. But since MTs are meant for both single and married folks, here's my 2 cents:
- Can openers can easily be substituted by using the flat screwdrivers already on the MT. And a cork screw? Trying to make an MT "good" at a lot of things sometimes gets in the way of making a "great" MT.
- The small flat blade screwdriver (the small rounded nub on the tip of the can opener) really puts the emphasis on the can opener function rather than the screwdriver application which seems like a poor choice of design. If we're going for a small flat blade, make it right in the first place and give it a longer reach.
- If I go camping, I make sure I get a pull-tab can. SO much easier to get all the contents out, especially the chunks of meat.
- Same basic reasoning above goes for getting rid of the bottle opener. Most bottled drinks now come with a manual screw off lid. These features on an MT are getting obsolete while other functions that should be there aren't.
-
I like the can opener, always have.
First, it has history within the multi-world. The idea, borrowed from the SAK and appearing on the first PST has been a feature of almost every full-size multitool since then. It hearkens back to the early days of multitooldom when the tools were aimed at outdoorsman and campers. Also, keep in mind that us poor people can't necessarily afford pull-top cans so it's still useful for us in a wide range of applications.
That and most modern can openers are useful for slightly more than opening cans.
The Leatherman model has a wire stripper ground into the tang and doubles as a (poor) bottle opener and awl in certain instances.
SOG and Victorinox add a small flathead to their openers.
For those who want it replaced with something else, what would you like to see? It's not too terribly hard to mod it into an awl if the tool doesn't have one of those but I can't think of much that would be potentially as useful to replace it.
- Can openers can easily be substituted by using the flat screwdrivers already on the MT.
Does that really work? I can't imagine it being anything but a messy pain in the butt.
-
@Spoonrobot said:
I like the can opener, always have.First, it has history within the multi-world. The idea, borrowed from the SAK and appearing on the first PST has been a feature of almost every full-size multitool since then. It hearkens back to the early days of multitooldom when the tools were aimed at outdoorsman and campers.
I've carried an original LM PST along on outdoor trips for quite a few years. So far as I can remember, it's never been used to open a can while outdoors. Opened a few cans at home right after I got it, just to check out its functionality.
Even on a multitool used exclusively outdoors, I'd rather have any other implement in that slot. I certainly see no need for canopeners or bottleopeners on multis not purchased for outdoor use.
@Spoonrobot said:
For those who want it replaced with something else, what would you like to see? It's not too terribly hard to mod it into an awl if the tool doesn't have one of those but I can't think of much that would be potentially as useful to replace it.I'd prefer nearly anything to a canopener.
Any implement that might see some use - a small Phillips or slothead screwdriver for example. An awl on those multis lacking an awl. Anything.
.
-
Can openers, bottle openers, and corkscrews should be relaced with:
- small phillips
- dedicated small flat head screwdriver with longer reach than a can opener
- small scissors for certain MTs which lose a file or blade to make room for scissors (eg Swisstool RS)
- scraper
- small manual drill like the new Swiss Tech 19-in-1 keychain MT
- small crescent wrench
- bit driver (exchangeable tips for flat or phillips)
- replaced with nothing so the MT get slimmer for better ergonomics
- the list can go on......
-
Can openers, bottle openers, and corkscrews should be relaced with:
- small phillips
The Vic can opener can be used as a Phillips screwdriver. In fact it's pretty darn good at it.
- scraper
Again, the Vic can opener can be used as this too.
I could understand if the can opener could open cans but do nothing else but the Vic can opener is so much more. Supposedly the Wenger one is too but you'd have to ask Ringzero about that ;). Both can be used as MANY other tools. It is the 2nd most implement on my SAK, the 1st being the small blade. I have used it to bend wire, as a makeshift chisel, a hook for carrying things, washing dishes, a "pokey thingy", screwdriver, makeshift drill, etc etc.
With its unique shape its usefulness is limited only by your imagination.
-
@ducktapehero said:
With its unique shape its usefulness is limited only by your imagination.I think you,ve summed it up there mate :)
-
@ducktapehero said:
I use the can opener on my SAK almost daily. It's great for opening cans(obviously), as a makeshift Phillips screwdriver, a scraper, a lightweight chisel, small flathead screwdriver etc etc. In fact if a multi-tool doesn't have a can opener it's pretty much a deal breaker for me. I always thought that it would be terrible to starve to death in a fully stocked bunker because you didn't have a can opener.+1. Exactly what DTH said.
-
I remember reading about some guy who fell into a cave during an expedition. His collegues couldn't get to him and, since he was uninjured, threw him every can of food they had and went back to get help. When help arrived, they found a very pissed off tourist and a pile of flattened cans.
Could be an urban legend, but I'm not taking any chances. Anything of mine that can have a can opener attached to it, does.
-
@ducktapehero said:
I could understand if the can opener could open cans but do nothing else but the Vic can opener is so much more. Supposedly the Wenger one is too but you'd have to ask Ringzero about that ;). Both can be used as MANY other tools. It is the 2nd most implement on my SAK, the 1st being the small blade. I have used it to bend wire, as a makeshift chisel, a hook for carrying things, washing dishes, a "pokey thingy", screwdriver, makeshift drill, etc etc.With its unique shape its usefulness is limited only by your imagination.
The canopeners on both Vic and Wenger SAKs are versatile implements indeed, useful for a whole lot more than just opening cans.
I like both designs, but lately am liking the Wenger design better than the Vic. I've discovered that I actually use it more on a daily basis, dealing with various small tasks for which the Vic implement isn't that handy.
Both are useful implements to have on a SAK, even if they rarely get used to open cans.
Although I do like the canopener implements on my SAKs, I'd rather not have them on bigger, plier-centric mulits.
When attached to a bigger, bulkier tool, they don't seem to be nearly as handy to use as when they are on a smaller SAK.
.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login