Wave or Rebar?
-
I can't stand carrying around extra bits or bit extenders and the like, and really don't like LM's stubby driver, so my Rebar sees way more carry time than my Charge TTi (which is essentially a Wave for people with more dollars than sense.) Even without scissors, which I normally consider essential.
If you don't mind carrying around the extra parts, a Wave may very well be better as a network admin. But you will need to carry the bit extender, not just a bit clip.
Also, while the bits are still nearly two dimensional, they're a step up over the Phillips on the Sidekick and stick in better.
regarding clips:
Maybe a nite ize clip would work on it? You'd have to check the dimensions, of course.
Dem
-
Having just done a fair bit of work using a Wave, I have to say that the philips, while not full 3d, works great. I had no problems with it slipping out of screws.
I'd vote Wave. It's awesome.
I own both, and the Rebar is a good tool, just not as good as the Wave. I can't count how many times the OHO blades came in handy in the last month.
Also, just so you know, the pocket clip is an accessory for the Wave. It doesn't come with the tool (normally).
So... Wave.
Get the Wave.
Did I mention the Wave?:D
-
Well, I finally did it. Lynn, you were the deciding factor. Considering you said the Phillips has worked well for you, I went with the BO Wave! Just purchased from Amazon with the BO pocket clip. Will be here Tuesday! Can't wait!
Thank you for all of the input.
-
Wave wave wave wave wave wave
D
-
@jnick said:
Are there any easy mods to get a pocket clip on a rebar? That's the one big thing making me not go with the rebar, at this point.Maybe a nite ize clip would work on it? You'd have to check the dimensions, of course.
Dem
Meanwhile in CA...pocket clip upgrade
Nice
those niteize clips look like they are made for the st300/rebar

-
@jnick said:
Well, I finally did it. Lynn, you were the deciding factor. Considering you said the Phillips has worked well for you, I went with the BO Wave!I don't think you'll be disappointed. I think the Wave might be Leatherman's best tool, for the money. The Charge might be better, but I don't think I could ever justify the extra cost for the slight extra comfort.
Please let us know how you're getting along with it once you've had it for a while. We like user stories here.
-
Oooh, thanks Kampfer :). I think I know what I'll be ordering next. That looks like a match made in heaven.
The Charge might be better
Since the Wave has already been chosen, I'm gonna go ahead and derail things a little ;).
I honestly don't think the Charge is better than the Wave. I like mine well enough to hold onto it, but I think it's an overpriced MT. It seems to me that the only thing the Charge totally has over the Wave is the hook on the serrated blade, which I find really handy. Aside from the dual bit driver model of course which could be handy for some. But otherwise...
I think the cap crimper is a silly gimmick and weakens the pliers (and pliers in MTs are weak enough.) I think the only reason the cap crimper is on the Charge is because it makes the plier head different from the Wave. I think premium blade steel is better served on a dedicated blade. And I don't think the thickness added by the scales is a worthwhile tradeoff for the boost in comfort (though I will admit it does feel a lot nicer in hand because of them.)
I like that it comes with a clip and some bits but you could easily get add those to the Wave and still come in for much less cost than the Charge. Really, I think the best thing about the Charge is the gut hook.
I will of course make my regular disclaimer that my opinion on the Wave/Charge design varies considerably from most folks here.
Dem
-
@jnick said:
Well, I finally did it. Lynn, you were the deciding factor. Considering you said the Phillips has worked well for you, I went with the BO Wave! Just purchased from Amazon with the BO pocket clip. Will be here Tuesday! Can't wait!Thank you for all of the input.
Next you should order a Victorinox SwissTool. It's an MT dream come true!!

In all honesty, it's almost impossible to beat the fit and finish of a SwissTool. The tool load out is also fantastic on them. The Supertool is also a fantastic tool, and I love the drivers on my ST200.
I think you'll be quite happy with the Wave though.

-
Dem's comment pretty much sums it up for with wrt the Charge.
I've never had a problem with the edge retention of the Wave, but I have had a problem with chipping the steel. I don't expect the edge to last forever but appreciate not having chunks out of the edge. I can't see a Charge improving anything for me.
-
@TxToolCrafters said:
You could get both...I can't believe you kept the opener or small bit driver over the scissors.
-
@Dem said:
I honestly don't think the Charge is better than the Wave. I like mine well enough to hold onto it, but I think it's an overpriced MT.This ^^^
As for the Wave vs Rebar debate, I went with the Wave first but since then longed for a more traditional looking 'mini-ST300' tool with replaceable wire cutters and rounded scales that don't wedge into your palm.
I do like OHO features Wave comes with, but in most cases this feature is just 'nice to have', in real use situations it hardly ever mattered to me.
cheers,
babola -
@Cupboard said:
Dem's comment pretty much sums it up for with wrt the Charge.I've never had a problem with the edge retention of the Wave, but I have had a problem with chipping the steel. I don't expect the edge to last forever but appreciate not having chunks out of the edge. I can't see a Charge improving anything for me.
I can agree with the price comment, but have to add that they are both expensive here and I would never pay full price for either of them.
In our own six page thread of broken multitools I didn't see a single one broken on the cc. Yes, plier tips will break and some just don't like the cc but it doesn't appear to be an issue.
Some don't want to carry a dedicated blade. And if they have coughed up for the Ti handles why not include a better blade.
I do like having the gut hook. I don't like having it on the back of the serrated blade. I prefer the sheepsfoot style like in the Rebar.
Value for money has to go to the Wave. As for function I would call it a draw. If they cost the same I would want the Charge.
-
I say rebar on steroids.... Pliers Replaceable wire cutter, knife, serrated knife,scissors,saw,wood/metal file,small bit driver,Phillips screwdriver , large screwdriver , med screwdriver , awl , can/bottle opener, lanyard ring , ruler .. Perfect with firesteel , light , peanut lighter, tweezers , whistle.. Perfect EDC..

-
@Obi1shinobee said:
I say rebar on steroids.... Perfect EDCDo you have two Rebars or did you swap the package opener and small bit driver?
-
I take off package opener and add small bit driver.. Much better tool.
-
I take off package opener and add small bit driver.. Much better tool.
-
I'm gonna add diamond file on it. Will be perfect multitool

-
@Obi1shinobee said:
I'm gonna add diamond file on it. Will be perfect multitool
For you maybe.

-
@Obi1shinobee said:
I say rebar on steroids.... Phillips screwdriver ... Perfect EDC..Is that an ex-Wingman Philips? And pivot screw?

Missing something with the package opener talk. Is there a new Rebar with package opener?
A brilliant mod which perfectly illustrates (IMO of course :)) the inside handle real-estate limitations of the Wave though I'm still trying to work out how everything has been crammed in.

-
I say rebar on steroids.... Phillips screwdriver ... Perfect EDC..
Is that an ex-Wingman Philips? And pivot screw?

Missing something with the package opener talk. Is there a new Rebar with package opener?
A brilliant mod which perfectly illustrates (IMO of course :)) the inside handle real-estate limitations of the Wave though I'm still trying to work out how everything has been crammed in.

See package opener here.
At a guess he removed the large washer and 3d phillips for the scissors, small bit driver and 2d phillips.
The trade with the Wave is not that much really - can opener and lanyard ring vs outside opening tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

