What's your latest GERBER?
-
So, I got a BO Mr. Pinchy
amazed at how different it is from my other SS Mr. Pinchy.
first, the fasteners that hold the plier head to the handles are different
plier head is COMPLETLY different
The BO one actually opens wider
and the inside of the plier head (inside the handle) is different too
Anyone know which is older? thanks!
-
That's sweet, detron!
The black one is older, I believe. I'm almost positive that that's Gerbers' first plier head shape. The screws instead of solid pins on the release mechanism as well point to an earlier one. Very nice addition to the family! -
@jerseydevil said:
That's sweet, detron!
The black one is older, I believe. I'm almost positive that that's Gerbers' first plier head shape. The screws instead of solid pins on the release mechanism as well point to an earlier one. Very nice addition to the family!thanks! I remember the first one I got back in '97 or so had the allen screws, but I had no idea how old it was when it was given to me, it could have been in the supply system for years.
-
and it is your fault jerseydevil!

-
Any other holes in your collection I can inspire you to fill? >:D -
@jerseydevil said:
That's sweet, detron!
The black one is older, I believe. I'm almost positive that that's Gerbers' first plier head shape. The screws instead of solid pins on the release mechanism as well point to an earlier one. Very nice addition to the family!The black one looks like a late version 4 Mr Pinchy to me, with the second plier shape that was used by versions 2, 3 & 4. The first plier shape (version 1 only) was more rounded and delicate looking.
-
That's sweet, detron!
The black one is older, I believe. I'm almost positive that that's Gerbers' first plier head shape. The screws instead of solid pins on the release mechanism as well point to an earlier one. Very nice addition to the family!The black one looks like a late version 4 Mr Pinchy to me, with the second plier shape that was used by versions 2, 3 & 4. The first plier shape (version 1 only) was more rounded and delicate looking.
Thank you.
Do you have a version breakdown? I am sure it is on mto somewhere, but thought I would go to the source
sent from phone
-
Thanks for the correction Greg.

-
@detron said:
Do you have a version breakdown? I am sure it is on mto somewhere, but thought I would go to the sourceI copied much of the following info from a earlier post on MTo (possibly by Bob ? ), with revisions and additions from looking at various Mr Pinchies (and some assumptions on my part). Naturally any errors/omissions are my fault. If anyone has any corrections and/or extra info please speak up (eg which versions were made with a BO finish). Sorry, I can't do photos. I hope this helps out all those interested in the development of gerber's (in)famous "Mr Pinchy".
**EARLY GERBER MULTI-PLIERS ("Mr Pinchy") **
Gerber kept making small changes to their Multi-Plier throughout the 1990's, so we tend to see a lot of subtle variations. Some were stamped and sold with the Fiskars logo, and at least some of these had slightly different tool loads (Fiskars owned Gerber at that time). At some stage Gerber started making a BO finish available, as well as the much more common bead blasted SS finish. Here's a summary of the main steps along the way:
Version 1) The very first models had a high-polish finish, instead of the bead blast we've seen on Gerber tools since. It also had button-head screws in all four blade pivot points, and button head screws on the plier slides. Also note the pivot bushing between the plier jaws. A crude pair of scissors was included, and a VERY thick Lanyard clip. The very first run of Multi-Pliers were etched with “FIRST PRODUCTION RUN” (a.k.a. “FPR” ) on one handle.
V1.0 FPR
V1.1 One handle cut-out, mis-matched nail nicks (don’t line up with cut-outs)
V1.2 One handle cut-out, matched nail nicks
V1.2 Two handle cut-outs, matched nail nicksAll ? “PATENT PENDING”
Version 2) The second version went to the now-familiar bead blast finish. The scissors were replaced by a big triangular shaped awl. This version still has button head pivots, button head sliders, and the pivot bushing between the plier jaws. The pliers had slightly beefier jaws with a squarer shape, while the lanyard clip was slimmed to a more “normal” thickness.
V2.0 “PATENT PENDING”
V2.1 “U.S. PATENT NO 5142721”Version 3) This version wasn't much of a change really. They simply did away with the pivot bushing.
All ? “U.S. PATENT NO 5142721”
Version 4) Changes: On one side of each handle, the button head screw was replaced with a round nut, while a file replaced the large awl.
V4.0 “U.S. PATENT NO
5142721/5142844” NB The 5142844 # was possibly an error, as later versions all used 5212844.V4.1 “ U.S. 5142721
PATENT 5212844
PAT PEND”**Version 5) ** This introduced a new, even beefier shape to the blunt nose plier jaws, and needle nose jaws were offered for the first time as well. Gone were the button head slider screws, replaced by two different sizes of round-headed rivets.
All ? “U.S. 5142721
PATENT 5212844
PAT PEND”At this point Gerber stopped with the minor evolutions of the Multi-Plier (Mr Pinchy) and came out with a major overhaul. Called the Multi-Lock when it first hit the market, the new tool had all-locking blades, plastic sliding lock releases, unique blade-pivot screws, the now familiar little circlip spring steel slider clips, etc.
After a while this tool became the 600-series Multi-Plier (MP600), with all its many tool component and plier type configurations. The very first ones were also stamped "First Production Run" (FPR).
All ? “U.S. 5142721
PATENT 5212844
PAT PEND” NB This is stamped inside the handle, not externally as before (and in a very small font).This information was last updated by gregozedobe on 5 August 2014
-
Do you have a version breakdown? I am sure it is on mto somewhere, but thought I would go to the source
I copied much of the following info from a earlier post on MTo (possibly by Bob ? ), with revisions and additions from looking at various Mr Pinchies (and some assumptions on my part). Naturally any errors/omissions are my fault. If anyone has any corrections and/or extra info please speak up (eg which versions were made with a BO finish). Sorry, I can't do photos. I hope this helps out all those interested in the development of gerber's (in)famous "Mr Pinchy".
**EARLY GERBER MULTI-PLIERS ("Mr Pinchy") **
Gerber kept making small changes to their Multi-Plier throughout the 1990's, so we tend to see a lot of subtle variations. Some were stamped and sold with the Fiskars logo, and at least some of these had slightly different tool loads (Fiskars owned Gerber at that time). At some stage Gerber started making a BO finish available, as well as the much more common bead blasted SS finish. Here's a summary of the main steps along the way:
Version 1) The very first models had a high-polish finish, instead of the bead blast we've seen on Gerber tools since. It also had button-head screws in all four blade pivot points, and button head screws on the plier slides. Also note the pivot bushing between the plier jaws. A crude pair of scissors was included, and a VERY thick Lanyard clip. The very first run of Multi-Pliers were etched with “FIRST PRODUCTION RUN” (a.k.a. “FPR” ) on one handle.
V1.0 FPR
V1.1 One handle cut-out, mis-matched nail nicks (don’t line up with cut-outs)
V1.2 One handle cut-out, matched nail nicks
V1.2 Two handle cut-outs, matched nail nicksAll ? “PATENT PENDING”
Version 2) The second version went to the now-familiar bead blast finish. The scissors were replaced by a big triangular shaped awl. This version still has button head pivots, button head sliders, and the pivot bushing between the plier jaws. The pliers had slightly beefier jaws with a squarer shape, while the lanyard clip was slimmed to a more “normal” thickness.
V2.0 “PATENT PENDING”
V2.1 “U.S. PATENT NO 5142721”Version 3) This version wasn't much of a change really. They simply did away with the pivot bushing.
All ? “U.S. PATENT NO 5142721”
Version 4) Changes: On one side of each handle, the button head screw was replaced with a round nut, while a file replaced the large awl.
V4.0 “U.S. PATENT NO
5142721/5142844” NB The 5142844 # was possibly an error, as later versions all used 5212844.V4.1 “ U.S. 5142721
PATENT 5212844
PAT PEND”**Version 5) ** This introduced a new, even beefier shape to the blunt nose plier jaws, and needle nose jaws were offered for the first time as well. Gone were the button head slider screws, replaced by two different sizes of round-headed rivets.
All ? “U.S. 5142721
PATENT 5212844
PAT PEND”At this point Gerber stopped with the minor evolutions of the Multi-Plier (Mr Pinchy) and came out with a major overhaul. Called the Multi-Lock when it first hit the market, the new tool had all-locking blades, plastic sliding lock releases, unique blade-pivot screws, the now familiar little circlip spring steel slider clips, etc.
After a while this tool became the 600-series Multi-Plier (MP600), with all its many tool component and plier type configurations. The very first ones were also stamped "First Production Run" (FPR).
All ? “U.S. 5142721
PATENT 5212844
PAT PEND” NB This is stamped inside the handle, not externally as before (and in a very small font).This information was last updated by gregozedobe on 5 August 2014
Thank you very much! now to store that safely away where I can actually find it.
-
This is where it would be nice to be able to bookmark certain post #'s in addition to just the entire thread.
-
@sawman said:
This is where it would be nice to be able to bookmark certain post #'s in addition to just the entire thread.I bookmark them on my computer by clicking on the post title and then bookmarking it in my browser.
Thanks for the info, Greg, it will be useful once we start the rehaul of the multitool wiki. That project scares me though. :ahhh
-
My latest is also my first - the MP400 :D
-
-
My latest is also my first - the MP400 :D
Awesome! And the Cult of the Flicky gains another initiate! What do you think of it so far? If you're not annoying the crap out of your wife and co-workers with the constant flicking open of the pliers, you're not doing it right...... >:D
I do rather enjoy the flicking, but haven't annoyed anyone yet ;) My wife actually thought it was neat the the pliers flick out. It's a bit stiff though, so I hope some fiddling will loosen it. I will probably oil it at work next week as well. That's my only complaint so far. It does make opening the handles a bit uncomfortable with the tool edges right in the position where my fingers rest to open them. However, due to that design, the grip is very comfortable for squeezing the pliers, so overall, not that big of a deal considering I don't use my MTs much.
-
I just picked up a Diesel, only because I did not have one, and I have never seen one in person! Looks like a nice tool, but I wonder why Gerber makes this when it is pretty much a MP600 with a slightly different look to it. What am I missing??

-
@mikekoz said:
I just picked up a Diesel, only because I did not have one, and I have never seen one in person! Looks like a nice tool, but I wonder why Gerber makes this when it is pretty much a MP600 with a slightly different look to it. What am I missing??
Not a lot really. My hunch is that they'd wanted it to replace the 600, but the people don't want the 600 replaced

-
You do gain a woodsaw and a can opener that's good for pokey/gougey jobs. I also quite like the knife blade and scissors too. I never saw the need for a MP600, as I didn't consider it was much of a step up from the MP400, although I do quite like the Diesel and was actually carrying mine today. Other than the DEsTroyer mod, I still don't own a 600 and am quite satisfied with the Diesel
-
Just picked as-new 5th gen blunt-nose Multi Plier on the Bay (the one with rivets instead of screws on sliders, which predated 1st gen MP600) for $19 shipped...absolutely stoked!

These supposedly belong to '96-'98 era, yay!
Now the wait begins ;)
-
@babola said:
Just picked as-new 5th gen blunt-nose Multi Plier on the Bay (the one with rivets instead of screws on sliders, which predated 1st gen MP600) for $19 shipped...absolutely stoked!
These supposedly belong to '96-'98 era, yay!
Now the wait begins ;)
I know that feeling. Been checking the mail 3 or 4 times today, because there should be an MP600 on the way, from eBay. I've spent all weekend hoping it would arrive today and now I'll spend all day tomorrow hoping it'll arrive tomorrow; it's terrible! Can't wait...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






