What Did You Use Your Multitool For Today?
-
The MP400 also got put to use cutting lots of cardboard today. I also used the pliers and small flathead to disassemble/mangle and old cell phone before throwing it away.
-
-
The MP400 also got put to use cutting lots of cardboard today. I also used the pliers and small flathead to disassemble/mangle and old cell phone before throwing it away.
Sometimes those are just the same thing. :D
Yup :D Mangling it was more my goal anyway...just something fun to do with my MT ;)
-
The MP400 also got put to use cutting lots of cardboard today. I also used the pliers and small flathead to disassemble/mangle and old cell phone before throwing it away.
Sometimes those are just the same thing. :D
Yup :D Mangling it was more my goal anyway...just something fun to do with my MT ;)
Any excuse to use my mt is a good one!!
Sent from my SM-G900V using Tapatalk
-
The MP400 also got put to use cutting lots of cardboard today. I also used the pliers and small flathead to disassemble/mangle and old cell phone before throwing it away.
Sometimes those are just the same thing. :D
Yup :D Mangling it was more my goal anyway...just something fun to do with my MT ;)
Any excuse to use my mt is a good one!!
Sent from my SM-G900V using Tapatalk
Oh yeah, I hear that buddy

-
I just used my OHT to "fix" the release of the folding backrest of her carseat on my wifes Ford.
She was standing next to me, looked at that, and said: "I really need a Multitool, too". Turned over to me and: "You gave me a flashlight already, now i need a Multitool!" :o
I grinned badly (she´s the one that calls me "doing the Batman" when i carry a sheat on my belt
), and gave her my smallest for her purse - a Freestyle. 
-
I only hope the djinn i woke up stays in his bottle.

-
Helped refurbish a wiring assembly that runs through a 1933 Morris ... somethingorother ... steering column using a Vic Spirit X
Used the pliers to act as a heat shield to protect a fibre washer while I desoldered the horn connection, crop pieces of brass rod to replace aluminium rivets, and hold the tiny cut pieces while I pre-peened one end.
Knife to strip wires (that wirestripper on the chisel isn't great IMO).
Awl to clean out where the original rivets were and the remnants of the solder on the horn connector.
Pliers again (held for me by someone else) to hold the connector steady while I resoldered it.
Screwdriver to connect the dip switch wiring and secure the main back plate, ang refit a spring clip.
File for cleaning up various areas and deburr the new rivets/pins -
Used my Surge to help rake and bale some hay. Among other countless tasks today.


That's us mobile.
-
I used the MP400's Phillips to disassemble a fan. Also used the pliers to loosen a couple TV cable connectors.
-
My Rebar's file came out today to take a nice big burr off a set of parts that the customer was waiting on in the loading dock. These weren't machined by any of my guys, they deburr their stuff. Dang nightshift!
-
I just used the MP400's pliers to pull a broken wire piece from my wife's bra, lol :)
-
The upstairs bathroom in casa de TJ just got repainted and I volunteered to put on a new toilet paper holder. The small flathead driver on my Micra got used to get the small screw out of both side of the holder to get it off the wall. The pull out phillips on the Super Tinker got used to take out old screws on the old holders and put in new screws with the new holders. I also used the pliers on some cheapo no name mt I won at a trade show to get the old sinker screws out of the wall.
-
Lol, she wouldn't appreciate taking/posting a pic like that ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


