Supertool 300????
-
-
Get a Surge damn it!!!
Ok, I got that out of my system. :)
Good luck. I hope you find one that you like.That's us mobile.
-
@jeremy1517 said:
the Supertool . . . Supertool . . . Supertool . . . Supertool 300I have incredibly refined powers of deduction, and sense that you want a Supertool 300. Therefore, you should get a Supertool 300.
-
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).
But if your not a Canadian like me, you should love the ST 300, really ;)
-
go Rebar and add scissors
-
@kahyja said:
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).But if your not a Canadian like me, you should love the ST 300, really ;)
One of the small bits on the ST300 will actually fit into a Robertson diagonally, in a pinch. Not an elegant solution by any means (and it'll mark up the end of the flathead,) but it works when you need it to.
Dem
-
@kahyja said:
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).But if your not a Canadian like me, you should love the ST 300, really ;)
Is this what you're after? ;)
<a href="https://flic.kr/p/nkomgx" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7439/14002866197_6faf902ff2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Obi1shinobee said:
go Rebar and add scissorsEven if the Rebar had a large bit driver it still can't hang with the big boys.
-
@kahyja said:
...I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge...I don't get this love for the interchangeable bit driver
. OK guys I admit it, its because Wave doesn't suit my EDC.If you have a 3D Phillips tool you can use the LM bit adapter kit. Sure you have to carry it but then you have to carry the bits anyway.
Anybody worked out an elegant way of dangling the bit adapter from a keyring?

-
Rebar dont need hang with big boy , hack rebar can do whatever big boy can do and more ... Bring It BIG BOY


-
@Obi1shinobee said:
Rebar dont need hang with big boy , hack rebar can do whatever big boy can do and more ... Bring It
You bring it.
:P :)<a href="https://flic.kr/p/jRwt2S" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3725/12374874424_263de0a821.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I Bring in your face anyday

-
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).
But if your not a Canadian like me, you should love the ST 300, really ;)
One of the small bits on the ST300 will actually fit into a Robertson diagonally, in a pinch. Not an elegant solution by any means (and it'll mark up the end of the flathead,) but it works when you need it to.
Dem
I'll give it a try for sure! Thanks
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).
But if your not a Canadian like me, you should love the ST 300, really ;)
Is this what you're after? ;)
<a href="https://flic.kr/p/nkomgx" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7439/14002866197_6faf902ff2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
That is very cool. But a very expensive solution to dismantle a Wave/surge

Damn you guys are terrible...now I have to get this idea of modifying my ST300 out of my head
Am I high jacking this thread now??

-
@kahyja said:
That is very cool. But a very expensive solution to dismantle a Wave/surge
Damn you guys are terrible...now I have to get this idea of modifying my ST300 out of my head
Am I high jacking this thread now??

I had the spare parts. As pingu said you could get one of these.
However I would recommend something like this. Cost under NZ$100.
I have used it almost every day for over a year now and had no issues.<a href="https://flic.kr/p/eRd4tT" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7441/9089499341_afbb73c9a6.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@dks said:
I assume the wave of the OP is problematic, so maybe getting a decent/fixed one (not gritty) may change his mind.I do not like the Wave much, but some members seem to love it.
It by far my favorite model. Very capable while sized to allow for daily carry. I still carry a fuse or a PST occasionally when I want to pocket carry instead of belt carry, but there is no comparison to the features and OHO of the Wave. With the wave, bit kit and extender, and a Maglite LED Solitaire all in the pouch it packs quite a punch into a relatively small sheath.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

