Got Paracord?
-
Well done stormdrane! Good comeback.. JR
Hey maybe you would know, have you ever found a thin hollow tube that will fit inside a cord?
You might try looking for old dried up ink cartridges that may fit, which might take a bit of work to get cleaned out, or some 1/8" or smaller brass/copper/stainless steel tubing from a hobby store, or maybe a sturdy thin hollow coffee straw/swizzle stick...

Thanks,
I had the ink cartridge in mind but like you said the cleaning outs gotta be a pain, the swizzle stick I didn't think of, but too flexible,, I'm looking for something I can fit a toothpick(s) inside of so it won't flex and break the toothpick? JR -
@MadPlumbarian said:
Thanks,
I had the ink cartridge in mind but like you said the cleaning outs gotta be a pain, the swizzle stick I didn't think of, but too flexible,, I'm looking for something I can fit a toothpick(s) inside of so it won't flex and break the toothpick? JRHobby shops that have parts for building remote control vehicles/aircraft will most likely have thin/strong tubing, used to build framework, that would probably work. See <u>K&S Engineering</u> ;)
-
A piece of the telescoping tubing of a old radio/car antenna.
-
@Lichtbote said:
A piece of the telescoping tubing of a old radio/car antenna.Yeah huh, good idea! JR
-
Well I kinda made a 3 in 1 keychain, not totally paracord but worked with it! I've been pondering about the toothpicks, I've always wanted one of those blood type keychains, so I put two and two together, I didn't have any snaps so I was limited on what I could do, so here's what I came up with,, JR
I took paracord and stitched it onto the strap, kinda to match this, but I used red so it matches all my other stuff that's black and red,


Next step I folded the strap, stitched it up and made little pockets to store toothpicks and an extra on the other side for a little cash stash


Last, just looped a small piece of paracord to make it easy to take off and open up, yet not to easy!

-
Good looking.

If you need those clasps, here they are available, pretty cheap (cheaper than here, but shipping ruins the price for me): https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=2376
-
@Lichtbote said:
Good looking.
If you need those clasps, here they are available, pretty cheap (cheaper than here, but shipping ruins the price for me): https://www.libertytreecollectors.com/productcart/pc/viewPrd.asp?idproduct=2376
Ok cool
! This was a first try, if anything I'll try another but with Velcro and maybe a split ring or clip, I know I have a few around here somewhere
JR -
Made a smaller one, but this time with a clip and Velcro, and only one side to stash, only wanted it for my toothpicks anyway.. JR
A comparison between yesterday's and today's.


It fits on the molle, but most importantly it matches!!


-
Good work JR.

-
Ok I had a brain fart again last night and I guess the saying goes third times a charm? I didn't spell the POS out cause it's to large, I remember I had some invisible string so I took the paracord and folded it over then looped stitched it, soo, it ended up being half the size and able to fit.. JR
Here's a pic of me using my little helping hands thingy for the first time, came in handy..

So then I laid it out to see if it would fit,

Then figured just take half of the other one apart rather then do the whole thing over again. here's the finished project..

-
Made a new lanyard for my vehicle emergency kit to match the colors of my Mini Cooper.

-
A double button knot(<u>video tutorial link</u>)...

-
@Stormdrane said:
A double button knot(<u>video tutorial link</u>)...
Very cool, will try this on the weekend.
cheers.
-
Interesting looking knot

-
@MadPlumbarian said:
Ok, I had a brain fart yesterday and had to try it out today, normally you keep a toothpick in your wallet, but what happens when you got that one little piece stuck and you don't have any left? What's the other thing you carry on you at all times besides your wallet? Keys no? Now they have those fancy one but they weigh a ton and cost like $15? So I thought of making something simple, probably won't work but worth a try.. JROk, so I took a piece of cord, looped it threw like so,

Took a toothpick and slid it in like so, also on the other side,

Cut it to length and put one of the little caps on the end, notice I put the cord on the sides and not in the center, this way it's easier to take off,

And this is what it looks like, my only thought is that there going to break after so long, I was trying to think of some hollow tube that I could slide the cord over and do the same, or even just tie a knot, but couldn't find anything around the house. Anyway this is what I ended up with.. JR

Get the supple plastic toothpicks (even have a small bristle brush on the end) that I can buy at my local pharmacy. No breakage then.
Cut to length, they also fit under the hook or phillips/corkscrew on SAK's that don't have T/T slots.
Mine are made by a different manufacturer, but are just like these:
http://sale.dentist.net/products/the-doctors-brush-picks -
@Stormdrane said:
A double button knot(<u>video tutorial link</u>)...
Crikey... that's a complicated looking knot in the video. You're more patient than I. If I was browsing youtube and saw a video in chinese I would have switched if off immediately.
That's a neat knot. I'm putting that on my cadet tonight.
-
Wow I threw a bit of a tantie trying that.
I tried it half a dozen times and only got to the last step on the final time... and upon pulling the knot together it was wrong so I got smurfty with it and gave up. Well that's my lunch break wasted...
Edit: Holy crap I tried it again and came off every worse >:( that's enough paracord for today... it's going to bother me until I get it. I won't be defeated by a piece of rope...
-
@Stormdrane said:
A double button knot(<u>video tutorial link</u>)...Gotta try that one, sometime soon. Would problably be great on my SAK and PS4. :D
-
Quick round up..
Keyfobs

Made another belt, had to follow my own tutorial to remember what to do!

Some neck lanyards, wrist lanyards and bracelets...


Found a way of using up some of the small lengths of cord....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login