Show me your toolbox
-
Umm, woah, smurf.

-
@Lichtbote said:
That´s a thing i´ve never understood.Here in Germany (and also in the parts of Netherlands where i often work) noone needs to bring his tools to work, all tools are provided by the company you work for. So the Boss has direct influence on the quality and amount of the tools for every single employee. That´s not only valid for the machines, also for the electric/hand tools and tool carts. Usually the same also for the work clothes and safety shoes.
It´s so much nicer/professional looking when all mechanics and tools and cars look the same to the customer.
My work is really laid back when it comes to presentation, for example we only have 1 sign on the building and it's at the old entrance that we don't use anymore, we just wear plain navy blue shirts and cargos. We all have our own personal tool boxes but workshop tools are available. Even without all the presentation we still have plenty of work coming through the door because of our quality work and fair prices. We only have 3 staff and our service is more personal that larger corporate workshops. Even though my boss is very old school and set in his old ways it's kept him in business for over 25 years.
-
Aye, i know these shops - they were common when i started to work, and some are still out there. As you mentioned, often more personal and more flexible to deal with.
But all companies provide the tools. At the smaller shops not with that "corporate standard" look, often more a wild collection of brands, but you don´t have to bring your own. That´s why i don´t understand the concept of bringing the own tools. Do you get extra pay for bringing the tools, their wear, damage, or possibly lost?
Clothes and shoes and such stuff are given mostly by bigger companies, often several sets combined with a washing service (you put the dirty workcloth in your locker, wear a fresh set, and get the dirty set back clean and nice after a few days). That´s nice, no more oiled stuff to give to the wife to put it in your own washing machine.
-
Yeah I get a weekly tool allowance in my wages, laundry is also paid for. I've been there for 12 years and may be taking over in the next few years as my boss will be retiring. :D
-
Sweet! I hope it works out for you.
Nate
-
Aye, that sounds cool.

-
That's quite a selection of nice tools, Lichtbote.

I don't actually have a toolbox. Mine are either haging on the wall in the workshop or are on various shelves.
-
Great thread

Nice boxes, bags, garages and w/shops

-
Thanks for your comments. I like these walls with organized tools hanging around, the cart is just so practical to move, so i don´t have to have a big cart in each of my shops all the time.
Not sure if someone is interested, as it´s not really "tools", shall i show my machinepark with old cast heavy industrial machines, too - or would that be like bragging? It´s nothing special, i just like restoring/working on old machines - the same way as some others like to work on old cars.
-
@Lichtbote said:
Not sure if someone is interested, as it´s not really "tools", shall i show my machinepark with old cast heavy industrial machines, too - or would that be like bragging? It´s nothing special, i just like restoring/working on old machines - the same way as some others like to work on old cars.By all means do.

-
Not sure if someone is interested, as it´s not really "tools", shall i show my machinepark with old cast heavy industrial machines, too - or would that be like bragging? It´s nothing special, i just like restoring/working on old machines - the same way as some others like to work on old cars.
By all means do.

+1 Lets see em!

-
@ducttapetech said:
Sweet! I hope it works out for you.
Nate@Lichtbote said:
Aye, that sounds cool.
Thanks!

-
OK, but i hope you expected not to much and are noe disapointed.

As mentioned everything here is in a period of getting a new structure/organization. Some of them are partly disassembled - each of them was in a running condition when i´ve got them, but as with old cars you can run them untill they break down, or check them and keep them running longer. I do this reorganization cause i had collected to much machines and had no longer the space to work on them.

The first old machine i got was a Mondial Celtic Lathe from the 60s. It´s belgian made, and they are great machines, no big ironhogs, as most stuff i collected more on the toolmakers side than for massproducing big parts.
The next is a filing machine. It works the same way as these small modellbuilders fretsaws (in fact you can use it as a big sturdy one, just make/get the adapters to mount the sawblades), but with many different files. This was the toolmakers machine for precise shaping before they got eroding machines. The table can be angled to get a always perfect angle, as the files movement is always the same - not as with hand filing. It´s german made, also from the 60s.
On the last pic in this post you can see my "little" saw, it has a pump for cooling-fluid, and can cut steel up to 160mm. It´s my "newest" machine, from the 80s.




-
This is something like a massive oversized benchgrinder. It´s made to sharpen lathe tools, they were mounted with the needed degrees on the tables with the clamp in the slot, then the table can be angled to get the other needed degrees. After that you turn on the machine, adjust the wanted feed with the big dial in front of the table, and then the table is moved from one side to the other, it´s mount is moveable. German, late 60s early 70s.
A mechanical press, to press bearings in or out, questioning prisoners, or whatever you need to give a lot of pressure. :D It´s a Klopfer DP2, 300mm workable way, rated for 2 tons - but don´t compare it with the chinese 2t press you can get at every net-toolshop, this baby weights 50Kg (without the table)
Last pic here is the shop compressor, austrian made by Alpha Technik, 2 cylinder with 500 liter/min, 10 bar, from 89. I had no intention to dissasemble it, but lately i needed to do it cause it took to long for generating full pressure - i found that the valve plates in one cylinder were broken. It will be fixed, but atm the small comp.in the shed is enough.




-
My mill, this is my oldest baby, german, from 49. Vario drive and very sturdy.
It´s a horizontal mill (as most of that date), but here you see a planned upgrade - a vertical fast running millhead from a Deckel FP1. :D
Here a pic before disassembling.
And a russian "workbench" drillpress from the 50s. 450/800/1400/2500/4500 rpm. For guessing it´s dimensions, the column is a massive 70mm rod.




-
This is a future project - it runs perfectly smooth, but obvisiously it never got any tlc. It´s discs can be sized up to 30cm/12", but i´ve planned to rebuild it with polishing wheels.
Additional i have a Greif bench grinder refurbished - also with this i´m not planning to make it grind again, need to turn some adapters then it will work with a brass wire wheel on one side and a satinizing wheel on the other. No pic yet.
That´s it - i think i´ve forgotten nothing.


-
Wow lichtbote, you got enough space for all that stuff? I always wanted a nice size workshop, I miss my little one, heck it was only 12' x 10' now I only have a desk :( but I always wanted to try my hand at one of those drill press/lathes or just a wood lathe, I did once make a all metal ball-peen hammer back in high school, wish I still had it, that little guy was nice! Just suck being limited.. JR
-
You have some really nice stuff there Lichtbote
I love the old machines! They were built to last a lifetime back in the day, unlike the machinery available now :D -
Great looking tools!
Thanks for thaking the time to show us Lichtbote

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

