Dismantling Leatherman Tools(Winning The War on Knurled Knobs)
-
I bought the Engineer pliers (2 of them) and I could not be happier
Worth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
-
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

-
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
-
[quote author=detron link=topic=7167.msg946397#msg946397 date=1410219821]
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
[/quote]basically they are the same as the Vampliers.
-
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]Hopefully I'll be leaving that one soon.
-
[quote author=Breezy12 link=topic=7167.msg946468#msg946468 date=1410237240]
[quote author=detron link=topic=7167.msg946397#msg946397 date=1410219821]
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
[/quote]basically they are the same as the Vampliers.
[/quote]So its the profile at the tip that makes them "Engineer pliers"? -
[quote author=zoidberg link=topic=7167.msg946496#msg946496 date=1410250805]
[quote author=Breezy12 link=topic=7167.msg946468#msg946468 date=1410237240]
[quote author=detron link=topic=7167.msg946397#msg946397 date=1410219821]
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
[/quote]basically they are the same as the Vampliers.
[/quote]So its the profile at the tip that makes them "Engineer pliers"?
[/quote]yeah, the name is more marketing than typical name. they work great for the knurled knobs though
-
[quote author=detron link=topic=7167.msg946559#msg946559 date=1410262440]
[quote author=zoidberg link=topic=7167.msg946496#msg946496 date=1410250805]
[quote author=Breezy12 link=topic=7167.msg946468#msg946468 date=1410237240]
[quote author=detron link=topic=7167.msg946397#msg946397 date=1410219821]
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
[/quote]basically they are the same as the Vampliers.
[/quote]So its the profile at the tip that makes them "Engineer pliers"?
[/quote]yeah, the name is more marketing than typical name. they work great for the knurled knobs though
[/quote]That explains it, thanks
.In German we only have Kombizange (Combination pliers) as opposed to a single function pliers, at least I have never heard anything else.
P.S. Knipex has a pretty nice "Pliers-ABC"
-
[quote author=Etherealicer link=topic=7167.msg946575#msg946575 date=1410266153]
[quote author=detron link=topic=7167.msg946559#msg946559 date=1410262440]
[quote author=zoidberg link=topic=7167.msg946496#msg946496 date=1410250805]
[quote author=Breezy12 link=topic=7167.msg946468#msg946468 date=1410237240]
[quote author=detron link=topic=7167.msg946397#msg946397 date=1410219821]
[quote author=Metropolicity link=topic=7167.msg946396#msg946396 date=1410219455]
[quote author=detron link=topic=7167.msg945352#msg945352 date=1410012184]
I bought the Engineer pliers (2 of them) and I could not be happierWorth their weight in GOLD. I love mine so much.
absolutely!!
we may need to start an engineer pliers owners club... :D
That will be a really small club. :P And I'll be left out. :(
[/quote]can't be in every club, but you are in the SwissChamp XL club

[/quote]

What exactly are "Engineer pliers", google seem not to be certain either...
[/quote]basically they are the same as the Vampliers.
[/quote]So its the profile at the tip that makes them "Engineer pliers"?
[/quote]yeah, the name is more marketing than typical name. they work great for the knurled knobs though
[/quote]That explains it, thanks
.In German we only have Kombizange (Combination pliers) as opposed to a single function pliers, at least I have never heard anything else.
P.S. Knipex has a pretty nice "Pliers-ABC"
[/quote]That looks sweet
-
:ahhh :ahhh :ahhh
:ahhh :ahhh :ahhh
more like losing the battle at the moment. Grabbed a couple of 9/32 cheapo cr@p sockets to make a couple of the bigger size to strip the new BO and Orange fuses.
LUCKILY (comparatively) I used my SS fuse to form the sockets.
First one went without a hitch...
Second one was hard as smurf and made a hex on the head of the screw! :ahhh :ahhhI'm so gutted I can't even bring myself to take a pic to post here.
maybe when I get to the "one day we'll laugh about this" point.
-
Thats not good. :( When can I start laughing? :-X
-
I must speak about these pliers here.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
I took apart the BO Fuse and the Orange Fuse, just using these pliers, (2 of them) I did not heat up the locktite or anything. I just grabbed and turned.
I know $25 for each plier is expensive, but they are AMAZING
-
@detron said:
I must speak about these pliers here.I took apart the BO Fuse and the Orange Fuse, just using these pliers, (2 of them) I did not heat up the locktite or anything. I just grabbed and turned.
I know $25 for each plier is expensive, but they are AMAZING
I found a deal on the pliers at about 50% off. I posted it in the "Deals" section of the forums just over a week ago.
-
@PTRSAK said:
:ahhh :ahhh :ahhh :facepalm: :facepalm: :facepalm: :ahhh :ahhh :ahhh
more like losing the battle at the moment. Grabbed a couple of 9/32 cheapo cr@p sockets to make a couple of the bigger size to strip the new BO and Orange fuses.
LUCKILY (comparatively) I used my SS fuse to form the sockets.
First one went without a hitch...
Second one was hard as smurf and made a hex on the head of the screw! :ahhh :ahhhI'm so gutted I can't even bring myself to take a pic to post here.
maybe when I get to the "one day we'll laugh about this" point.
Peter that is a bummer mate I guess you could look at it two ways , you now have a fastener with a conventional head :P or now you need to replace the damaged fastener :think: ,, should not be too hard to get one :think: :think: , I think I might have a spare PST fastener :think: not sure if they would fit the Fuse though :think:.Or you do what I do & try & not look at the trashed head of the fastener ::) :D .REALLY odd that your socket set had sockets of variable hardness ??? , it is a shame you want to buy cr#p soft sockets & they slip a proper one in there :ahhh.
@detron said:
I must speak about these pliers here.I took apart the BO Fuse and the Orange Fuse, just using these pliers, (2 of them) I did not heat up the locktite or anything. I just grabbed and turned.
I know $25 for each plier is expensive, but they are AMAZING
DTs do the fancy pliers mark the fastener's edges at all :think: :think:
-
:ahhh :ahhh :ahhh :facepalm: :facepalm: :facepalm: :ahhh :ahhh :ahhh

more like losing the battle at the moment. Grabbed a couple of 9/32 cheapo cr@p sockets to make a couple of the bigger size to strip the new BO and Orange fuses.
LUCKILY (comparatively) I used my SS fuse to form the sockets.
First one went without a hitch...
Second one was hard as smurf and made a hex on the head of the screw! :ahhh :ahhhI'm so gutted I can't even bring myself to take a pic to post here.
maybe when I get to the "one day we'll laugh about this" point.
Peter that is a bummer mate I guess you could look at it two ways , you now have a fastener with a conventional head :P or now you need to replace the damaged fastener :think: ,, should not be too hard to get one :think: :think: , I think I might have a spare PST fastener :think: not sure if they would fit the Fuse though :think:.Or you do what I do & try & not look at the trashed head of the fastener ::) :D .REALLY odd that your socket set had sockets of variable hardness ??? , it is a shame you want to buy cr#p soft sockets & they slip a proper one in there :ahhh.
@detron said:
I must speak about these pliers here.I took apart the BO Fuse and the Orange Fuse, just using these pliers, (2 of them) I did not heat up the locktite or anything. I just grabbed and turned.
I know $25 for each plier is expensive, but they are AMAZING
DTs do the fancy pliers mark the fastener's edges at all :think: :think:
here are all the photos I took, and I wont say there are NO marks, but I will say, there is very minuscule if any
@detron said:
OK, the swap was not that bad, would have been done in like 15 minutes if it was not for those :serverloft: washers that made me understand what frustration really is.anyway, on to the write-up
so here are the factory tools
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01823resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01823resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01824resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01824resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
hard to see, but notice the different angles on the large flat drivers (I took a better angled photo, but you could not see the silver one)
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01825resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01825resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
so I like using the engineer pliers, but I also like NOT scratching the body of the tools so I decided to try something new, and it worked fairly decently.
I used these
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01826resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01826resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
and put them on the end of the pliers like so
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01827resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01827resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01828resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01828resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
they wore out before I was finished, I just replaced them and it was all good.
here is the tear down results
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01829resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01829resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
so, I also wanted to switch the lock releases so that the Orange Tool had black insides and locks.
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01830resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01830resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
ALL DONE!!!!!
orange handles, with black tools, black pliers, black locks, and black knurled knobs.
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01831resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01831resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01832resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01832resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01833resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01833resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01834resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01834resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
AND the BO handles with all silver everywhere.
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01835resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01835resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01836resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01836resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01837resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01837resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01838resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01838resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/multitools/Fuse Switch/DSC01840resized.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/multitools/Fuse Switch/DSC01840resized.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I think my coworker is going to be happy, I am actually very happy with my "Hidden Shiny"
-
My Engineer Pliers turned up today - I only bought one set as I find a Crunch works ok - I wish I'd got some months ago. So easy to take the tools apart.

-
I was looking into the Rebar and possibly buying one to take apart and add scissors but this thread was fantastic to just learn about these engineer pliers. With my work the years of frustration and heartache I could have avoided if I would have known about these so many years ago! So this thread was fantastic!
-
There is a better option these day. Check out Loki-mobiles tools for Leatherman in the B&S
/topic/61708
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login