Vic combo tool?
-
Besides the hole being smaller and it falls a little further in the frame, they work just fine.
-
Wait, I'm confused. Do 84's have smaller end pins than 91's? I can never get Vic's pin sizes straight.
-
84mm = 2.2mm and 91mm = 2.5mm
-
The 84 combos are just a hair thinner, and overall smaller in profile. Almost like the whole thing is shrunk by 5%. I think people have used 84s on 91s fine, but they for sure do not work well on 93 in my experience. I only buy the 91 combos for 93 mods.
-
Not all the pins on a 91 are 2.5 though.
Anyway, so basically an 84mm combotool is not a direct drop-in replacement for a 91mm small blade, I'd need to drill out the hole and it would still sit a little weird? That's annoying.
EDIT: (widening an 84mm pivot hole is outside of my capabilities as I don't have any carbide drill bits or a drill to use them in).
-
There is a pic on here somewhere that compares 91 and 84 combo on 91s and it sits lower but I think the nick is accessible still. I'll try to find it.
Found it, it was Gareth's pic.
</post/176006>

-
Bleh, why can I never find posts with clear info like this when I search.. :/ Thanks for that link though.
So I guess the next question then is, are there any 91mm besides the Compact that have a combotool? Throwing $31 at a knife just for one tool is silly.... If there's another larger model with more stuff it might make sense to just use that as the base (instead of hacking up a Swisschamp which is my original idea).
-
Trail Guides can be found cheap sometimes.
-
@Quartz said:
Bleh, why can I never find posts with clear info like this when I search.. :/ Thanks for that link though.So I guess the next question then is, are there any 91mm besides the Compact that have a combotool? Throwing $31 at a knife just for one tool is silly.... If there's another larger model with more stuff it might make sense to just use that as the base (instead of hacking up a Swisschamp which is my original idea).
Nope just the Vic compact. The next one that has it is the XXLT at lots more $.
The combo on the 111mm models (Hunter, Equestrian and workchamp XL) that have it are also the same size, but I doubt those would be cheaper than the Compact.
-
Bleh, why can I never find posts with clear info like this when I search.. :/ Thanks for that link though.
So I guess the next question then is, are there any 91mm besides the Compact that have a combotool? Throwing $31 at a knife just for one tool is silly.... If there's another larger model with more stuff it might make sense to just use that as the base (instead of hacking up a Swisschamp which is my original idea).
Nope just the Vic compact. The next one that has it is the XXLT at lots more $.
The combo on the 111mm models (Hunter, Equestrian and workchamp XL) that have it are also the same size, but I doubt those would be cheaper than the Compact.
The 91mm DofE has one too. Depends on your location as to how available these would be for you
-
@50ft-trad said:
Bleh, why can I never find posts with clear info like this when I search.. :/ Thanks for that link though.
So I guess the next question then is, are there any 91mm besides the Compact that have a combotool? Throwing $31 at a knife just for one tool is silly.... If there's another larger model with more stuff it might make sense to just use that as the base (instead of hacking up a Swisschamp which is my original idea).
Nope just the Vic compact. The next one that has it is the XXLT at lots more $.
The combo on the 111mm models (Hunter, Equestrian and workchamp XL) that have it are also the same size, but I doubt those would be cheaper than the Compact.
The 91mm DofE has one too. Depends on your location as to how available these would be for you
Oh right I always forget that one. :D
-
@Syph007 said:
The next one that has it is the XXLT at lots more $.sigh. You know, I swore that one of the huge SwissChamps had a combo tool, but when I searched I didn't see it. It's listed as "combination tool". I did a find for 'combo'. I swear I can't search anymore....
Good call on the 111mm combos though, although you're right that the price isn't any better. Chopping up the larger Workchamp might be an option though, maybe.
-
Erk, DofE is $61 on amazon compared to $31 for a compact. Oh well.
-
Oh, I totally forgot about the Yeoman. I feel like people would murder me if I cut one of those up though :)
-
I think dash4it from uk has the DOE at resonable prices, not like the madness last year
but still ok. And they ship internationally. -
Here's the link.
http://dash4it.co.uk/vict...dinburgh-pocket-tool.html
We cleaned them dry last year.
Still visit them occasionally hoping for a sale like that one. -
I built a Yeoman recently, using parts from old 91mm's and a combo tool from an 84mm. I assembled it into brass scales that I made exactly the same size and shape as standard Vic 91mm scales.
The hole in the combo tool needs to be opened up to 2.5mm as noted, and I found that the tool sat low enough in the knife to be annoying. I tried tweaking the end of the knife spring to make it sit higher, and despite this it still sat lower than I like. I didn't feel comfortable tweaking the spring any more than I already had, so I "compromised" by dremeling a small nail nick relief into the outside brass scale.
This is almost invisible, and works OK, well enough at least. But I was much more of a hassle than I originally thought it would be.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login