Kampfer's Mini Surge (By Breezy12)
-
No, I really dislike wingmans package opener. I think it is pointless.
Reason being this implement only has one single purpose, taking up space and I don't think it is good at what it design to do. Everything on a MT shall be versatile.
I would rather use a sharp knife if I wish to open up a blister pack nicely.I agree; I'm not a big fan of the Wingman package opener either. I just thought it might be an option if you **reeeeeaaaallly **wanted to get rid of the can opener. ;)
I have found the package opener works quite well.
Everything your combo opener does I can do with a knife so I don't mind removing it. -
Of course, but seen like such a weaste to use a nice knife for such task.
So if the can opener can cut boxes, that is win for me.
Wingmans box opener can not open cans...

-
@Kampfer said:
Of course, but seen like such a weaste to use a nice knife for such task.
So if the can opener can cut boxes, that is win for me.
Wingmans box opener can not open cans...

I see it as a tool getting a job done, not a waste of a nice blade.
The opener works for you and thats great. I can see the reasoning.
Out of curiosity, when did you last need to open a can with your multitool? -
Often actually , summer time we eat those Asian grass jelly in cans often, but of course I could use the opener in kitchen for that. It is more fun to use a MT.
-
When I go out for battle reenactment, I could really use a MT to open cans, but I can not use such device because that is farb.

-
So never then?

-
:-[
-
Everything your combo opener does I can do with a knife so I don't mind removing it.
I am considering what you suggest, what should I replace it with?
Dude - you don't touch and fiddle with that Mini-Surge of yours - OK?!
LOL! :D
No really, leave it alone, it's great as is. 8)
-
Don't take advice from me.

-
LOL
-
Earlier today I was in Yahoo HQ in Sunnyvale for a sales/engineering meeting with the fire chief and a bunch yahoo big shots in suits.
At the end of the meeting we have to split a big set of engineering drawings into two smaller sets, but it was binded together by heavy duty staples.
The secretary had a hard time pulling it apart because the standard office staple remover failed miserably...Then there was a flash, a shiny thing flew out under my suit, its powerful jaws chew up and pull out all the nasty little metal worms within a few seconds...
That is a wow factor right there! :oWalked away from the meeting with a signed contract in my hand, big smile on my face and Mini-Surge in my pocket. :D
-
Mini Surge the hero with his sidekick Kampfer
. Good going buddy!! I think most of us wish for more of those moments when our MT's get that shining moment or when we pull a MacGyver!! 
-
@mrmustard said:
I think most of us wish for more of those moments when our MT's get that shining moment or when we pull a MacGyver!!
Truly.
-
How very cool!

-
You sly dog you! I need a proper sheath for my Wave so I can carry it again.
-
I love your mini-surge. I've been making my own, and have basically been doing the same things you're doing. I have a few questions though. It's only been a little over a month since the last post, so I think I should be fine in terms of necro.
-
How did you make all the tools open smoothly? I tightened the screws just enough to keep the outside-opening tools centered in their slots, so they don't scrape the sides. This makes it really tight though, like getting out the blade out with my thumb is actually painful. Any looser and it will scrape the side. I'm keeping the screws together with purple loctite, so I can make adjustments easily. I'm also using tri-flow in everything because that stuff is fantastic.
-
Some modifications I had to do to get the rebar pliers to work in the wave body properly were to grind down the blade lock that engages when the pliers are open so the blade doesn't scrape it when opening, and I had to sand the faces of the pliers a little to get them to close without grinding on the inside surface of the handles. Did you also have to do these things? I don't think you mentioned anything about this, so I'm making sure it's not just me.
-
Did you only have to grind the pivot hole for the back piece of the wingman scissors, or also for the spring piece? The reason I ask is after taking it apart, I noticed the spring hole is actually larger than the wingman pivot, so it has some play to lock into place. I haven't put the scissors in my wave yet.
Also a suggestion, if you grind a little ramp on the edge of all the outside opening tools for the nubs on the tool locks (the nubs that keep the tools in place when in the closed position), they will open and close a lot smoother. I've been doing this on every knife I've had with this kind of lock. I can take a picture later if you don't get what I mean.
-
-
first of all, welcome to the forum!
and don't worry about the necro... a month is nothing. ;)I did the original mod work for Kampfer's Mini Surge, so let me see if I can answer your questions...
-
this is interesting... how much are you adjusting the screws? I have found that even very small adjustments (i.e., less than 1/4 turn) can have a big impact on the tool. I just checked a few of mine, and while I wouldn't say the blades are perfectly centered, they're definitely not scraping the sides either. (I checked both modded and stock tools.) Are all the brass washers in the correct places? You made a good move by using loctite, too.
I use the blue loctite, but to each their own. ;) -
the overextended pin on the blade safety lock is a common problem. :) I've run into it many times on different mods, and I know others around here have as well. Grinding the pin down is the quickest/easiest solution I've found. (Although I can't remember for sure if I had to grind the pins on this particular mod.) I've never had to mess with the pliers though... are they scraping on the inside of the handle, or on the internal tools? I recently did a variation of the Mini Surge and ran into a problem with the pliers scraping against the can opener.
-
I only enlarged the pivot hole on the main piece of the Wingman scissors. The spring piece already has a big enough pivot hole, so I didn't see a point in messing with it. I've put Wingman scissors into a few different Wave/Charge mods now, and haven't had any problems with the functionality of the spring.
I know what you're talking about with the nubs on the tool locks... but I actually like to have a little bit of resistance when opening the blades on my MTs. on the other hand, I like my folders to open quickly and smoothly, so maybe I'm just a bit odd in that regard. :D
Hope this helps... if you have any other questions, by all means, feel free to post here, or poke around in the Mod Squad forum, or start a new thread... we've got plenty of talented modders around here who are more than willing to help!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
The can opener can stay, just needs to be more versatile.