The SURGEon
-
I had a hard time opening the saw today and I had to pry it up with a key.
I'm not sure what was sticking .
I just hope it doesn't become a issue.
Looking at the photo straight above, a saw could benefit from a short spray of a WD40, maybe?
Good eyes. It does look like it could do with a clean, or is it just the photo..?
-
I had a hard time opening the saw today and I had to pry it up with a key.
I'm not sure what was sticking .
I just hope it doesn't become a issue.
Looking at the photo straight above, a saw could benefit from a short spray of a WD40, maybe?
Good eyes. It does look like it could do with a clean, or is it just the photo..?
Its just a little sawdust and pocket lint. It could use a good cleaning though by the looks of it.
The one thing I truly hate about outside opening tools is there a dirt magnet.
-
I had a hard time opening the saw today and I had to pry it up with a key.
I'm not sure what was sticking .
I just hope it doesn't become a issue.
Looking at the photo straight above, a saw could benefit from a short spray of a WD40, maybe?
Good eyes. It does look like it could do with a clean, or is it just the photo..?
Its just a little sawdust and pocket lint. It could use a good cleaning though by the looks of it.
The one thing I truly hate about outside opening tools is there a dirt magnet.
My brother outright refused to upgrade from ST300 to Surge for that reason.
-
[quote author=JAfromMn link=topic=54465.msg949826#msg949826 date=1410844488]
I had a hard time opening the saw today and I had to pry it up with a key.I'm not sure what was sticking .
I just hope it doesn't become a issue.
Looking at the photo straight above, a saw could benefit from a short spray of a WD40, maybe?
Good eyes. It does look like it could do with a clean, or is it just the photo..?
Its just a little sawdust and pocket lint. It could use a good cleaning though by the looks of it.
The one thing I truly hate about outside opening tools is there a dirt magnet.
My brother outright refused to upgrade from ST300 to Surge for that reason.
[/quote]At least he had a good reason. The only reason really that I can think of not to switch.
-
He does the same kind of work as you do, JA. He couldn't be happier with the ST300. The only upgrade he wants is the bit adapter for 1/4" nuts and a hammer for light tapping.
He says if he use Surge he would spend half of his time cleaning it LOL.
-
From carrying my wave in my pocket to the surge in a sheath definitely cuts down dust/dirt/lint etc but I also have compressed air at disposal when at work so makes it very quick and easy to keep clean.
-
@Rossko07 said:
From carrying my wave in my pocket to the surge in a sheath definitely cuts down dust/dirt/lint etc but I also have compressed air at disposal when at work so makes it very quick and easy to keep clean.Yup, Surge isn't a pocket darling and should be worn in a sheath, pouch or a Skinth of sort. That way it would not only be easier to carry but remain much cleaner overall, IMO.
Cheers.
-
It is not pocket time that is a problem, it is when it is being use. ST300 enclose itself like the box when used to keep dust/dirt/lint out.
-
Bought the surgeon a little gift.
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/20140916_185938-1_zps47aec378.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/20140916_185938-1_zps47aec378.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Great, how is the fit...any wobble?
Love the rub-off patina your tool is slowly developing, beautiful!
-
I pulled a few dozen staples like this one today.
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-09-16202719_zps87898872.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-09-16202719_zps87898872.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I had to do a little carpentry to get a fridge to fit in a whole it was about 3 inches to big for.
-
I had to remove the wheels
The metal saw I've been carrying was easy to swap in and worked pretty good.
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-09-16202211_zpsed639afe.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-09-16202211_zpsed639afe.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/20140916_145824_zpsf7dd7903.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/20140916_145824_zpsf7dd7903.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I used the pliers to bend and break off the other side of the metal strip I cut to remove the wheels axel,
I also opened a new stove and the fridge with the good doctor's plane edge blade removing lots of tape and stickers and unbolting the fudge and stove from there pallet frames with the pliers.
Sorry no pics I was to busy.
-
side by side would you go for the Surge or ST300 at this point?
-
@styx said:
side by side would you go for the Surge or ST300 at this point?Yeah. I enjoy Joel's looks at the daily usage, but I especially like the comparisons. E.g., previously ST300 vs. Swisstool, and Rebar vs. Swisstool Spirit. We each come to our own opinions on this stuff, but Joel's is authoritative and persuasive based on what he does for a living and his daily usage of his MTs.
I agree with Mr. Babola about how the black oxide is wearing and how it looks good. With guns, knives and MTs, I have always liked the look of a well-used tool. Most tools never reach the stage of being well-used unless they are giving the user some good service, so when you see a tool with some battle scars, it is usually a good one.
-
side by side would you go for the Surge or ST300 at this point?
Yeah. I enjoy Joel's looks at the daily usage, but I especially like the comparisons. E.g., previously ST300 vs. Swisstool, and Rebar vs. Swisstool Spirit. We each come to our own opinions on this stuff, but Joel's is authoritative and persuasive based on what he does for a living and his daily usage of his MTs.
I agree with Mr. Babola about how the black oxide is wearing and how it looks good. With guns, knives and MTs, I have always liked the look of a well-used tool. Most tools never reach the stage of being well-used unless they are giving the user some good service, so when you see a tool with some battle scars, it is usually a good one.
couldn't have said it better myself

-
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-09-17124719_zpscede14ed.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-09-17124719_zpscede14ed.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-09-17124808_zpsf1e4c4bd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-09-17124808_zpsf1e4c4bd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@JAfromMn said:
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-09-17124808_zpsf1e4c4bd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-09-17124808_zpsf1e4c4bd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Love the idea of the flashlight sheath attached to the Surge sheath. Going to have to give that a go myself.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
