Core vs ST300 vs Swisstool vs Grappler vs Diesel vs Swissgrip
-

<u>Swissgrip:</u>
A very versatile set up here. Firstly there’s the backspring Phillips (not shown - need a LOT of clearance space for that one) and a couple of flat drivers, but there’s also a ¼” hex driver in the scale of the tool. On top of this, the smaller flat driver has an adaptor that fits on which also takes standard hex bits. Several options for ensuring that screwdriving job gets done<u>Swisstool:</u>
Likewise, the Swisstool CS Plus also give several options for getting the job done. Aside from the double ended cranked hex wrench that takes standard bits, and the mini eyeglasses driver that sits in the corkscrew in the sheath (none of which is shown here), the tool itself is also heavily loaded with driver options. Phillips and four flat drivers are offered in the tool itself. Add this to the peripheral tools that come with the package, and there’s pretty much anything you could want.<u>Core:</u>
Leatherman sticks with their standard formula of Phillips and three flat drivers. These are quite nice drivers and the flat ones are hollow ground. Not a lot more to be said about these other than they all offer decent reach. A hex bit adaptor is available separately which fits on the Phillips<u>**ST300: **</u>
Guess what ... same as the Core<u>**Diesel: **</u>
One Phillips and three flats, very similar to the Multiplier drivers in many resects though styled slightly differently. The biggest difference is the Phillips head is one of the semi-flattened 2.5D versions. Still works fine as an occasional driver, though arguably not as well as a fully formed 3D driver. More likely to wear quicker too. None of these drivers are particularly long, though I have found them long enough for the majority of jobs. Gerber also offers a bit adaptor which fits on the Phillips, which takes standard hex bits<u>**Grappler: **</u>
Bringing up the rear again is the Grappler’s driver tip on the end of the file, and the semi-flattened 2.5D Phillips on the end of the combo tool. That's it! If you need the tool to do anything else, then get the same bit adaptor that fits on the Diesel, as it works just the same on this Phillips. -
Very nice comparisons Al
I'm digging the 30th anniversary ST300. I love the looks of it :D -

<u>**Swissgrip: **</u>
A typical Wenger style “punch” rather than awl. Unsharpened, capable of punching a hole in a piece of leather, but more of a general use pokey thing<u>Swisstool:</u>
Sharpened and with a slow taper for decent control of hole size produced. Quite good for use as a scribe too in my experience<u>Core:</u>
Standard Leatherman awl. Not much control of hole size, but a decent working tool all the same<u>**ST300: **</u>
Slightly different nail nick, but otherwise the same<u>**Diesel: **</u>
No awl, but the can opener can be used as an awl in certain applications<u>**Grappler: **</u>
Nowt, zip, zilcho, nuffink! -

<u>Swissgrip:</u>
As regards openers and wire strippers, there’s just a cap lifter and wire bending notch on the big lad<u>**Swisstool: **</u>
Cap lifter, crate opener, chisel, scraper, wire stripper, can opener and wire bending notch<u>**Core: **</u>
Standard Leatherman combo tool for can opening and cap lifting, with a wire stripper notch<u>ST300:</u>
Ditto – but with a slightly bigger wire stripper section<u>Diesel:</u>
Separate can opener and cap lifter<u>Grappler:</u>
Cap lifter and wire stripper -
A great write up Al, I'm really enjoying it.
But tell me... What camera are you using? The clarity is amazing. -
and finally ...

... stuff offered by the others that the Core and ST300 don't have ...
Fixed pliers
Flicky pliers
Locking pliers
Scissors
Chisel
Crate Opener
Bar scraper
Pry tool
Nail/Tack remover
<u>**
Conclusions:**</u>If I was going to dash out of the house and wanted to throw one of these tools in my pocket before I went, it would be the Gerber Diesel. It might not tackle every job as well as one of the others, but it handles well and would help with most spur of the moment odd jobbery life is likely to throw your way. If I wanted to bag carry a "tackle absolutely anything" tool, it would the the Swisstool CS Plus with all the associated trimmings (corkscrew, mini driver, wrench and bit set). I personally think the Grappler offers a better supporting toolset (or certainly no worse) than the Crunch, but I wouldn't reach for it unless I specifically wanted locking pliers. The Swissgrip is simply too unwieldy for me. The Core and ST300 are perfectly fine - but I'd personally sooner grab the Diesel for better ergonomics, or the Swisstool for the larger toolset. Purely a matter of personal taste and not a reflection on the tools' abilities. I know I've been quite harsh on LM at times, but these larger tools have traditionally been the arena in which they shined brightest ... it's just they're a little too big for my hand size
-
@tosh said:
A great write up Al, I'm really enjoying it.
But tell me... What camera are you using? The clarity is amazing.Cheers :) It's just a little Lumix compact camera. A Panasonic DMC-FS3 to be precise. I fell lucky with lighting conditions yesterday evening as it was a little overcast and so was diffused nicely
-
awesome review/s

you're getting quite good at it Al
(missed out the Gerber mp600 though ::) ) -
@Taxi Dad said:
awesome review/s
you're getting quite good at it Al
(missed out the Gerber mp600 though ::) )That's because I don't have one. I only have the DEsTroyer mod with the Paul Chen shear heads, and didn't consider that a fair comparison :) I've opted not to bother getting a 600, as it doesn't really offer much over the 400 other than bigger handles and a remgrit blade I have no regular use for :D
-
I could have sent you my old beater for a photo shoot ! next time ask around for all the tools before you get started. you review was so helpful it would have been perfect if you had everything lol
(I love the size of the Mp600, only multiplier that can open wide enough to open a standard screw top cola bottle, that I've found so far !) -
Your turn for the review next time then
:D You could always get one of the younglings to upload the piccies for you :) -
@50ft-trad said:
<u>**Core: **</u>
I was right! I could have sworn the pliers handles on the Core were closer in the closed position than with the ST300, but at the UK meet I allowed myself to be convinced the reverse was true. Maybe there’s variations on one or both of these tools that sets the spacing differently.You're correct. We compared a Core and the ST300 and the ST300 handles were noticeably closer together. They gradually got wider apart from the ST to the ST200 to the Core, then the ST300 was half way between the Core and the ST200.
The fact there is variation irritates me. I have a Core and I can't really grip things with it because I have fairly small hands too. I'm a medium and a half, medium gloves are very tight, large are loose.
-
Tom, can you take some measurements of your two, and I'll take measurements of mine. It would be nice to see which of the tools is varying and by how much. We prob need to standardise the measurements so we're both measuring the same thing. Centre distance of tool pivots?
-
Oooohhh! Although in the pics above, the ST300 appears more splayed, the measurements on mine are actually identical. Confirmed by offering them up side by side. Maybe the ST300 handles hadn't fully "latched" open in the pic

Both tools:
Measuring at the widest point across the handles - 58mm
Pivot Centre distance - 42mmNOTE: The Core still "feels" better though
-
You BROKE the canon camera? I see you are not using it for these pictures.
Your need to do some batoning tests and some ninja throwing tests too for the review to be more related to real life use.
-
@dks said:
You BROKE the canon camera? I see you are not using it for these pictures.Your need to do some batoning tests and some ninja throwing tests too for the review to be more related to real life use.
Nope the Canon is doing fine ... other than the missing charger :-[ I'm hoping that turns up soon. Ther Lumix is a great little camera though.
As for the extra tests, the last time I tried to throw a ninja I put my back out ::)
-
Al: I'll get my Core out of my car later. I don't actually have a Supertool to measure.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

