Keychain Leathermans
-
Thanks..

Now you got me wanting a T10

-
@50ft-trad said:
Kampfer, the T10 appears to be discoed, so you might want to keep your eyes open for nabbing a couple of spares

Yes sir. I tried to order some from IDL but they dont make them no more, I got lucky to obtain one from Rex
Weren't they made under a different name again? I seem to remember reading something like that a while ago.

-
The T7 and other tools like it unfortunately won't work for me as scissors are a requirement (bad wording on my part). I've heard about the Dime, but thought it was supposed to have a worse reputation than any of Leatherman's offerings. I'm heavily considering a Vic Midnite Manager because I like the tool layout and trust Vic. I really want pliers though, I'm just not sure how much I'm willing to sacrifice overall quality to get them.
-
You talk as if the Leathermans have a bad rep?
The dime is fine (though not built to the same quality as Leatherman). The Leatherman PS4 is excellent.
I've deliberately tried to abuse mine. I damaged the screwdrivers by trying to screw wood screws into a hunk of pine without any pilot holes (to see what it could do) and I've undone bolts and pulled/twisted projectiles out of some large caliber rifle rounds which took a lot of squeezing... far more than I'd expect the little tools to stand up to.
I'd recommend the PS4 to anyone.
Don't forget, the Gerber has a lifetime warranty and the Leatherman has Leatherman's 25 year no questions asked guarantee. You break it, send it in and they send you another one.
-
@RimfireNZ said:
Don't forget, the Gerber has a lifetime warranty and the Leatherman has Leatherman's 25 year no questions asked guarantee. You break it, send it in and they send you another one.Yeah, being able to replace something half a dozen times for free is nice and all, but I'd rather a tool that doesn't break in the first place. Time is money.
-
@RimfireNZ said:
Don't forget, the Gerber has a lifetime warranty and the Leatherman has Leatherman's 25 year no questions asked guarantee. You break it, send it in and they send you another one.Yeah, being able to replace something half a dozen times for free is nice and all, but I'd rather a tool that doesn't break in the first place. Time is money.
Agree, like insurance, i hope that is something I will never need to use.
-
Well I have two approaches to this question, the first is to forget the "keyring" requirement and just to pocket a Juice S2. While I do have S2 backspring concerns it is IMHO vastly more useful than a Dime (on a keyring). No experience of a PS4.
My other approach is to pair a Style PS (on a keyring) with a plierless, sometimes also scissorless, SAK in the pocket. A really flexible combination.
-
Neither of those are going to work for my use case, though. I'm specifically looking for something small that can fit in a coin pocket/purse for when I can't carry my normal full size EDC.
-
What capabilities must the tool have as an absolute minimum?
-
I'm not 100% sure yet. What I'd LIKE to have are:
- pliers capable of handling small stuff, bending paperclips, small electronics nuts, etc.
- scissors
- #2 size phillips
- #1 size phillips
- some kind of medium sized flathead screwdriver similar to the bottle opener / combo tool on a 91mm SAK, that can also function as a very light duty prybar
... but I've never seen anything in this "weight class" that has all of these in one package. I haven't fully decided yet which of these I'm willing to give up and which are hard requirements (besides scissors). I'm fine with doing some basic grinding and polishing to convert a tool I don't need into a screwdriver tip. I don't really need a blade of any form (scissors are good enough at this size), nor do I give a crap about the ubiquitous can/bottle openers (although I doubt I could find a multi that doesn't have one in some form).
The PS4 looks like I could grind down the bottle opener into a #2 phillips and sand the end of the file into the flat. Dime maybe I could do something with that bottle opener hanging off the end of the handle. Style PS loses two drivers, but maybe the lighter weight makes up for it? Midnite Manager loses the pliers and flat, but the pen/light is handy so maybe it evens out, and I know Vic's quality.
-
I'm a big fan of combos rather than relying 100% one one tool. If you are prepared to consider that, an IDL T5 or T7 combined with a Vic Classic or Vic Rambler/Manager would have you covered.
The reason I've said this is the PH2 driver. You can get flat Phillips drivers, but they are limited, wheras the T5/T7 offers a full 3D form, plus the flat driver would be better for light prying than a weedy flat driver as found on most keychain tools. The T& has additional smaller flat and Phillips drivers which pop out to the side. If they work, you'll be fine with a Vic Classic, but if you think that might restrict access being effectively Tee handled, you could stick with a T5 and upgrade to a Rambler/Manager for the smaller drivers (combo tool and driver tip on the end of the file)
-
Oh yeah, size:
The absolute extreme max size would be like a 2 layer 84mm SAK, (8.5cm long, 2cm wide, 1.5cm thick), but that's bursting-at-the-seams big for the pockets and pouches where I'm trying to cram this. Ideally I'd like something a lot smaller. I'm currently using a modified Squirt S4.I kinda don't want to deal with multiple tools if I can avoid it. I guess I don't really have a good reason for this, I just find it really inconvenient. The situations where I most need this is like where I'm wearing formal clothing or little clothing (beach) and either don't have the pockets to carry a bunch of stuff or I don't want to have to keep track of it all. (I don't keep any tools on my actual keychain, too much hassle).
And the 'flat phillips' drivers don't bother me that much. Vic's SD tip works fine as does most of the ones I've used on other keychain tools. I know at this size I'm not going to be doing any high torque stuff like wood screws in furniture. I just want something that can get the side panel off a computer or the batter door off a toy.
[edit: making three separate posts of one paragraph each is dumb]
-
.
-
.
-
I like all the little leatherman's
-
@pingu said:
Well I have two approaches to this question, the first is to forget the "keyring" requirement and just to pocket a Juice S2. While I do have S2 backspring concerns it is IMHO vastly more useful than a Dime (on a keyring). No experience of a PS4.The drivers are basically the same size on the Juice as they are the PS4. The wire cutters work better on the PS4 and are basically the same size. What the pliers are capable of is surprising. The knife (on the current Juices) is minutely larger than the PS4 (I'm not exaggerating... it's barely longer than a small SAK blade).
So for the extra size of the Juice you get... weight... and that's all. Oh, and bigger scissors. Not worth it really.
-
@RimfireNZ said:
Don't forget, the Gerber has a lifetime warranty and the Leatherman has Leatherman's 25 year no questions asked guarantee. You break it, send it in and they send you another one.Yeah, being able to replace something half a dozen times for free is nice and all, but I'd rather a tool that doesn't break in the first place. Time is money.
Well as with anything, if you abuse it it'll break. I've abused my Squirt PS4 through a lot of tough treatment and I'm very pleased with it. I wouldn't give up on that as an option.
-
I like and carry the Dime and LM P4. I carry the P4 along with my Wave and have found it to be quite hardy. I carry my Dime at work and while I havent given the scissors any hard work this tool hasn't failed in anything I have asked. I carry the Dime on a tool keychain and I do have problems with it wanting to open, I carry the P4 in a Skinth.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login