What did you use your Leatherman for today?
-
Used my Surge to help remove and install a new radiator and brake lines on a GMC Jimmy and help do some welding on a Ford Escape.

Nate -
@ducttapetech said:
Used my Surge to help remove and install a new radiator and brake lines on a GMC Jimmy and help do some welding on a Ford Escape.

NateEvery time I see that Surge I want to do that myself!
-
I used the Rebar to install some new HID spotlights on the Hilux over the weekend. I tapped into the high beam wiring so it triggers a relay and runs the spots direct from the battery.
I quickly found out they're FAR too bright to have on the road all the time (they're insanely bright) so today I installed an isolator switch so I can disable them from the high beams when I want.

The Charge (which I used today) let me down. I had to go get my screwdriver set and crimpers. Describing the screwdriver reach as "poor" is being kind (especially with the pocket clip... but it's too handy not to have), and I really miss not having the electrical crimpers on my other Leathermans. It's such a great idea to have.
-
Used my Skele to open a drink for my wife.
Sent from my Nokia Lumia 1020 using Tapatalk -
I've been using my flair instead of plastic forks when I go places. I guess Leatherman is saving the environment
-

I made these hand crafted, wooden, flowers using my Charge TTI.Sent from my iPhone using Tapatalk
-
Those are cool!!!
Nate
-
Thanks guys!
Sent from my iPhone using Tapatalk
-
Switched the (very hot nozzle) on my gas powered soldering iron combo tool from heat gun to blow torch while trying to free up a 1933 Morris Cowley damper unit. Neither worked, and heating up over a gas camping stove saved the day
-
Cut some zip ties and small wire with the Rebar today!
-
SurCharge has been opening packages and snacks. Also it's on general fiddle duty while I wait for things to finish
. -
My Hilux had a bad case of Diesel bug a couple of months ago. I've had the tank removed and blasted and I've replaced the fuel filter (and it gets some diesel treatment every tank), but it's started running like a dog again.
I stopped by the auto shop and grabbed a new filter. I had the Kick on me today so I used that to swap it out.

She runs great again now.
-
Cut the plastic wrap off of a box of Taylor's tea using my Charge's straight blade.
Sent from my Nexus 7 (2013) using Tapatalk Pro
-
I used the philips driver on my skeletool to open a drain
-
Replaced a sump pump with my Charge tti... saw blade cut through 1-1/2 pvc easily. Used the blade and file to debur the pipe, pliers to trim some zip ties, and then the flat blade to tighten the clamps. One tool, one job.
-
I've accidentally driven down the road with my rear spotlight on twice now, so I used my Blast to pull the switches for the light out, then install it in the dash (instead of by the hand brake) and installed an annoying buzzer so I know if it's on or not.
It's messy but I was using scraps of wire I had around as I didn't have my full electrical toolkit on me.

I used the knife to make a little foam enclosure for it as it's a bit loud. I ended up making a bigger, fully sealed one after this.

-
Used my Lm Surge for all kinds of uses. Cutting wire. Sawing wood. Used the diamond file to sharpen an old chisel. Most interesting thing I used my Surge for was at a wreck site, Used it to cut some bandages, cut a wirefence, opened some regular bandages for a EMT. Used the knife and saw on my Surge help cut some brush to help out the officers, EMTs and Firefighters to do there job easier.
Nate
-
I extended the handles of my BORebar and deployed the metal file to reach and retrieve a battery that fell and rolled underneath our dresser. Uses like this are one of the reasons I sometimes prefer the tools on the inside configuration

-
BO Surge had a field day today. Many uses pulling parts off decommissioned machines at work.
Used the awl for picking out screw caps

Phillips bit driver to remove said screws

Used a 4mm allen key bit to remove mounting screws. No pic.
First use of my hack saw blade. Used it cut off a cable from an old vacuum. Couldn't get the surges pliers around the whole cable so this really worked a treat.

Again, used an Allen key bit, 3mm this time to remove an old switch panel.

Used it a heap more for similar tasks but no pics. Love this tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login