Introducing: Toolslinger's SurCharge
-
@Monrogue said:
That's really nice
I would love for my ReCharge TTi to have scissors on the outside like that. I would probably put them in place of the serrated blade though. I guess I'd just put an awl in place of the regular Charge scissors inside. Not really sure what else would work there
Well, maybe ditch the bit driver and replace it with a regular phillips, and put a small/medium sized flathead in place of the scissors. Oh man, now I've got ideas >:DThe way the Wingman scissors are constructed (lever layer) would limit them to being placed in the file or saw slots. If you want to keep file and saw, it's fairly easy to swap one of them into the knife slot like I did. Vic scissors might work but I'm not sure of their thickness relative to the blade...
-
That's really nice
I would love for my ReCharge TTi to have scissors on the outside like that. I would probably put them in place of the serrated blade though. I guess I'd just put an awl in place of the regular Charge scissors inside. Not really sure what else would work there
Well, maybe ditch the bit driver and replace it with a regular phillips, and put a small/medium sized flathead in place of the scissors. Oh man, now I've got ideas >:DThe way the Wingman scissors are constructed (lever layer) would limit them to being placed in the file or saw slots. If you want to keep file and saw, it's fairly easy to swap one of them into the knife slot like I did. Vic scissors might work but I'm not sure of their thickness relative to the blade...
Ah, thanks for the info man
I would likely just have one of them put in the serrated blade's spot then. -
Well done and hats off to you for putting a great tool together.
-
Very nice!!
Sent from my iPad using Tapatalk
-
Very nice job there buddy.

I would love to upgrade to those newer handle slabs, they look mint. :)
So can I have the serrated gut hook blade?

-
Sweet name and great load out. I'm really like that name

-
@Toolslinger said:
Thanks everyone for all the props! Gotta love this place.@zoidberg I'm keeping the blade ;) probably gonna swap it back in place of the saw. I can get a nice 111mm SAK with awl and saw, but I'm not a big fan of serrated Vic blades (plus no guthook).
Yeah the gut hook rules.

-
Thanks everyone for all the props! Gotta love this place.
@zoidberg I'm keeping the blade ;) probably gonna swap it back in place of the saw. I can get a nice 111mm SAK with awl and saw, but I'm not a big fan of serrated Vic blades (plus no guthook).
Yeah the gut hook rules.

I asked him about it too via PM. ;) those blades are great, they're just hard to come by.
-
Thanks everyone for all the props! Gotta love this place.
@zoidberg I'm keeping the blade ;) probably gonna swap it back in place of the saw. I can get a nice 111mm SAK with awl and saw, but I'm not a big fan of serrated Vic blades (plus no guthook).
Yeah the gut hook rules.

I asked him about it too via PM. ;) those blades are great, they're just hard to come by.
Great minds think alike eh. :D
-
Thanks everyone for all the props! Gotta love this place.
@zoidberg I'm keeping the blade ;) probably gonna swap it back in place of the saw. I can get a nice 111mm SAK with awl and saw, but I'm not a big fan of serrated Vic blades (plus no guthook).

Yeah the gut hook rules.
I asked him about it too via PM. ;) those blades are great, they're just hard to come by.
Great minds think alike eh. :D
They are good.
-
Update: I swapped the guthook blade in place of the saw. I picked up a great deal on an OD Vic Hunter with a nice 111mm saw
.Now I have an awl, saw, mini serrated hook blade, corkscrew, mini-driver and a better bottle opener (combo tool, I'll still use the LM for cans as I like it better).
I've attached a shot of my current setup. Need to get updated hero shots of the SurCharge.
-
I like it!

-
Thanks Kampfer!
I decided I'm going to try keeping my setup as light/compact as possible and try to keep everything formatted so it will fit in my jean pockets.
Currently, the SAK and organizer are left front with the SAK hanging on the outside seam and the SurCharge is right front clipped where I'd normally carry a folder.
I'm thinking this may be pretty close to perfect for what I normally need.
-
@Toolslinger said:
Update: I swapped the guthook blade in place of the saw. I picked up a great deal on an OD Vic Hunter with a nice 111mm saw
.Now I have an awl, saw, mini serrated hook blade, corkscrew, mini-driver and a better bottle opener (combo tool, I'll still use the LM for cans as I like it better).
I've attached a shot of my current setup. Need to get updated hero shots of the SurCharge.
nice loadout, Toolslinger! I really like your choices.
sounds like you've got all your bases covered, and I completely agree that the combo tool is a better bottle opener while the LM can opener is better for cans. 
-
Very nice mod, some solid forward thinking and steady hand with an eye for detail...
you're a rare beast these days with all things instant and half of the population on anti-ADHD meds.Cheers!
-
Update: SurCharge is in a sheath. I tore the pocket clip off it (well mostly bent to around 90 degrees) on a random protruding bulkhead on the bus yesterday.
Thankfully, the tool remained in my pocket and was not damaged in the incident.I bent the clip back, but I'm not convinced it's the way to go (seems looser now).
Now I carry the SurCharge and P2 in belt sheath and keep the lighter and Hunter in the pocket. Since I'm not carrying a bit card behind the tool (standard LM nylon sheath) it carries slim on the belt.
-
Did the clip bend 90° and back without breaking? Where was the bend at? What did you use to bend it with?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login