Surge hacking?
-
Yes you could.

-
Is there an easy way to get ahold of a second shank holder (without buying another whole surge)? I don't see any on eBay, etc.
-
Try and find some secondhand beaters or ask nicely in the trade section.
-
I think your best bet is to keep an eye on ebay for a beater Surge that you can sacrifice for parts. I ended up finding one for around $40 that was covered in rust and dirt, but cleaned up pretty nicely. I had previously searched high and low for parts, but Surges just don't get modded as much as Waves/Charges do, so the parts are much harder to come by.
good luck in your search.

-
Surges just don't get modded as much as Waves/Charges do, ....
AS a light user of MT I think the Surge already is a complete package. maybe heavy users like JA can think of something to improve.
^this.
The only time I ever modded a Surge was an old model (added extra large bit driver to make it XTi or ALX style and put in ST300 pliers).
There isn't much on the new Surge that I'd want to mod. I can just add accessories to cover any tool it may be missing (and there aren't many in my mind).
What were you planning on doing? What tools are missing and what tasks are you trying to accomplish?
-
@Toolslinger said:
What were you planning on doing? What tools are missing and what tasks are you trying to accomplish?@Quartz said:
Could you swap out the scissors for another t-shank holder?I am not sure I seeing the reason to have two blade exchangers, explain?
-
I'm a firm believer in having different classes of MTs tailored to a somewhat narrow range of functions. MTs are all about compromise, and I think the compromise of having a couple of leaner more purpose-oriented tools I can grab when I need is better than having a single do-everything monster that's heavy and/or awkward to use. In the case of the Surge, I'm toying with the idea of it replacing my Wave as my "heavyweight". MT-sized scissors are more a medium duty thing for me, and I'd already have them in my EDC anyway, so I was wondering if I could replace them with something else. (On the same token, I'd also be ripping out the inside-handle tools and mounting a screwdriver socket for standard full size bits. I doubt anyone else has done something like that though, so I didn't bother to ask about it).
-
Or, to put it another way: I have a "medium" EDC SAK with scissors, mini pliers, and a couple screwdrivers and other things suited for typical day to day home/office stuff. It's a little too big and awkward for small electronics work though, so I have a separate "precision" kit for that. My SAK is also not quite up to the task of doing big stuff with thick gloves, so I have a separate "heavy" MT for that too (which is currently a Wave). If I'm doing some other task for a while, I'll swap these tools in and out accordingly. (ie; if I'm out camping or something, the SAK and precision kit get left behind and replaced with a serrated folder).
-
@Kampfer said:
I am not sure I seeing the reason to have two blade exchangers, explain?Forgot to answer this directly:
It would be nice to have like, a metal saw and metal file at the same time without having to keep swapping back and forth. It doesn't HAVE to be another shank holder, it's just that scissors would be a waste of space for how I do things so I'd like to replace them with something else if it's not too much work. -
The full size bit driver will have to be short and thinned down to fit in. Let us know how you get on.
-
So you will always have your "medium" SAK with you, when called upon, you get the Surge to do the heavy stuff?
I can see your reasoning but to me, MT is more for the unexpected situations, which you won't know what you are going to need exactly, light or heavy.
-
@Quartz said:
I'm a firm believer in having different classes of MTs tailored to a somewhat narrow range of functions. MTs are all about compromise, and I think the compromise of having a couple of leaner more purpose-oriented tools I can grab when I need is better than having a single do-everything monster that's heavy and/or awkward to use. In the case of the Surge, I'm toying with the idea of it replacing my Wave as my "heavyweight". MT-sized scissors are more a medium duty thing for me, and I'd already have them in my EDC anyway, so I was wondering if I could replace them with something else. (On the same token, I'd also be ripping out the inside-handle tools and mounting a screwdriver socket for standard full size bits. I doubt anyone else has done something like that though, so I didn't bother to ask about it).you might be surprised what some people around here have tried...

-
I'm a firm believer in having different classes of MTs tailored to a somewhat narrow range of functions. MTs are all about compromise, and I think the compromise of having a couple of leaner more purpose-oriented tools I can grab when I need is better than having a single do-everything monster that's heavy and/or awkward to use. In the case of the Surge, I'm toying with the idea of it replacing my Wave as my "heavyweight". MT-sized scissors are more a medium duty thing for me, and I'd already have them in my EDC anyway, so I was wondering if I could replace them with something else. (On the same token, I'd also be ripping out the inside-handle tools and mounting a screwdriver socket for standard full size bits. I doubt anyone else has done something like that though, so I didn't bother to ask about it).
you might be surprised what some people around here have tried...

I have one half made to go into a Core, just need to weld it.
-
I'm a firm believer in having different classes of MTs tailored to a somewhat narrow range of functions. MTs are all about compromise, and I think the compromise of having a couple of leaner more purpose-oriented tools I can grab when I need is better than having a single do-everything monster that's heavy and/or awkward to use. In the case of the Surge, I'm toying with the idea of it replacing my Wave as my "heavyweight". MT-sized scissors are more a medium duty thing for me, and I'd already have them in my EDC anyway, so I was wondering if I could replace them with something else. (On the same token, I'd also be ripping out the inside-handle tools and mounting a screwdriver socket for standard full size bits. I doubt anyone else has done something like that though, so I didn't bother to ask about it).
you might be surprised what some people around here have tried...

I have one half made to go into a Core, just need to weld it.
can't wait to see it.

-
@Breezy12 said:
you might be surprised what some people around here have tried@zoidberg said:
The full size bit driver will have to be short and thinned down to fit in. Let us know how you get on.The "Blasted Thing" idea is neat, but more than I was aiming for. I was just going to like weld something in straight up- no folding or pivot or anything. Turn the handle into a solid block with a bit hole in the end, it's all I really need.
-
@Breezy12 said:
you might be surprised what some people around here have tried@zoidberg said:
The full size bit driver will have to be short and thinned down to fit in. Let us know how you get on.The "Blasted Thing" idea is neat, but more than I was aiming for. I was just going to like weld something in straight up- no folding or pivot or anything. Turn the handle into a solid block with a bit hole in the end, it's all I really need.
Interesting. So like a Crunch eh. Go on then.
:) -
@Kampfer said:
So you will always have your "medium" SAK with you, when called upon, you get the Surge to do the heavy stuff?For typical home/office or small contract work, yes. Again, if I know I'm going to be somewhere where I don't really need my SAK, I'll swap it out for a different tool.
@Kampfer said:
I can see your reasoning but to me, MT is more for the unexpected situations, which you won't know what you are going to need exactly, light or heavy.The thing is for me I hardly ever need to like, randomly repair a fence or something without any warning. I generally have at least some broad idea of what kind of "weight class" I'll need for whatever I'm doing that day. I rarely need a full sized pliers-based MT, so I'm fine leaving the Wave/Surge in my tool bag to grab when I need it. And if I happen to be in a situation where it would be handy but I didn't bring it, "oh well", I'll live. They're just to heavy to justify carrying on my belt all the time, and too awkward with precision stuff to be useful as an EDC for me.
-
The "Blasted Thing" idea is neat, but more than I was aiming for. I was just going to like weld something in straight up- no folding or pivot or anything. Turn the handle into a solid block with a bit hole in the end, it's all I really need.
Interesting. So like a Crunch eh. Go on then.
:)Wait, was there a version of the Crunch that had a bit driver?
-
The "Blasted Thing" idea is neat, but more than I was aiming for. I was just going to like weld something in straight up- no folding or pivot or anything. Turn the handle into a solid block with a bit hole in the end, it's all I really need.
Interesting. So like a Crunch eh. Go on then.
:)Wait, was there a version of the Crunch that had a bit driver?
Yes, all Crunch has it. #11, remove the knob and there it is.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login