Any interest in a minimalist SAK challenge?
-
@gustophersmob said:
...
If I can find my E01, I'm in!If we really wanted to go old school, we could break out the solitaires ;)
If I can use my 3mm LED drop-in in it, I'm game. >:D
-
To me a minimalistic sak is like the Manager that I carry on my keys! I dont use it everyday though but it is always with me and alot of times, I leave my Salt 1 at home and just carry the sak.
-
@50ft-trad said:
You still having nightmares about the saw? :P :DYou don't? ;)
-
@50ft-trad said:
@50ft-trad said:
You still having nightmares about the saw? :P :D
You don't? ;)
No I just keep cracking up laughing at the thought of you struggling with it >:D
I was actually thinking of doing another saw test as I have a few saws I didn't have back then and might need voloneers to do comparison tests.

I need to source a Gerber saw and maybe a Wenger Professional first. I think I'm at a dozeb different ones now.
-
@50ft-trad said:
@50ft-trad said:
You still having nightmares about the saw? :P :D
You don't? ;)
No I just keep cracking up laughing at the thought of you struggling with it >:D
I was actually thinking of doing another saw test as I have a few saws I didn't have back then and might need voloneers to do comparison tests.

I need to source a Gerber saw and maybe a Wenger Professional first. I think I'm at a dozeb different ones now.
So which extra ones do you have now?
-
@50ft-trad said:
You still having nightmares about the saw? :P :D
You don't? ;)
I saw enki's video, I didn't leave a comment back them.
I wasn't surprised by the poor performance of the GAK's wood saw, given the relatively short stroke caused by the combo tool on the saw's end and also the fact that the teeth seem geared mainly towards a push stroke and that's only half of a push-pull stroke.
Also, I remember his surprise at the unexpected poor performance of the Spirit's wood saw, for which I'd like to mention a couple of thoughts if you don't mind. First is that initially I was drawn back by it's size, it's shorter and thicker than the one on 91+93mm SAKs but I realised it's for the best since like this it's harder for it to bend and it's easier to accidentaly put a lot of force sideways and cause the saw blade to become bent when used with the handle extended.
The second thing, the wood saw feels way more efficient to me when I use it with the handles extended.
Which reminds me... -
As for the minimalist madness challenge, I'm all for it though I won't be taking part either.
I consider as my true EDC what I carry in my pants' pockets and my watch. So my EDC carry now consists of a Vic Pioneer wrapped in a handerchief, a alox Rambler (forgoing T&T is fairly minimalist, I'm sure many agree) and a Fenix E01 attached to it, apart from keys, wallet and a mini Bic lighter.
Not taking part because I'm very rarely eager to leave my bag behind for long and there live a Vic Handyman, a Spirit, a Fenix LD12. I was considering adding a Ecoline Climber to the mix
but that would be even more of an overkill. 
-
@50ft-trad said:
So which extra ones do you have now?SOG, full sized Swisstool, 130mm Wenger Ranger and I didn't test the ST300 back then.
firiki, I agree with some of the points But I think it's better we save it for the designated saw test thread in a few days. :D
-
:D -
I already carry an E01 and a Tomo, Rally, or Classic. Other than an EAB that I carry for work, which I use to keep from ruining a good blade, if I'm allowed to keep it during the challenge, I'm game. I just keep a Micra or small 2-layer SAK on me. I'm sure I can downsize to a Bantam or Waiter, or just go without it and just have my keyring SAK and the Gerber.
-
@Etherealicer said:
Actually, the Wenger can-opener is a real handicap, as it results in no small screw-driver.Sand down the tip of the Wenger nail file just a tad and it works fine as both a Phillips and a small flat-head screwdriver. I've done this on all my Wenger EDC SACs and it's just as effective as the screwdriver on the end of the Victorinox can opener.
That might be a good idea, it would also have quite good reach, you have a picture of that?
Actually, best 2-layer Wenger for me would be the Ranger 38-36 with two locking drivers, unfortunately I don't have one

-
I just tried the Crack Carry method for 24 hours with my Classic SD, and now I can't find it. Should I see a doctor?
-
@powernoodle said:
I just tried the Crack Carry method for 24 hours with my Classic SD, and now I can't find it. Should I see a doctor?You need a dose of Milk of SAKnesia.... :D
-
I just tried the Crack Carry method for 24 hours with my Classic SD, and now I can't find it. Should I see a doctor?
You need a dose of Milk of SAKnesia.... :D
Or maybe one of these... :sak:
-
I rest my case, here.
I want to be without my trusty Swisschamp ..... it has a 'HOOK' >:D -
Ok, I'm going to be brave and accept this challenge
I just ordered a black Vic Compact, which will be minimalist compared to my Rogueneer for sure. I think for the most part I'll get by fine with it, but I'm rather attached to my Rogueneer, and will surely miss carrying it. As I said earlier, I'll still carry a multi for the pliers more than anything, but will only use it if absolutely necessary, and will honestly report if I do so. I should have it between Friday and early next week, so I'll be a few days late to start the challenge, but will update when I have it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



