Wood spoon making article
-
@Spork, Lord of Lime Jello! said:
You could try a Hoof Knife...they come in stainless. It would require re-profiling to make it sharp enough to carve...and I'm not sure if they are all heat treated as well as a real knife blade. I have a modified Mora hoof knife that works really well.Ah a hoof knife never thought of that!
Worth a try. :D
-
My modified Mora 171 Equus...which is stainless


-
I think i can fit a blade like in a sak one way or another. Its something ive wanted to try for awhile so we'll see how it goes.
-
I still want to build a whittler's SAK with a crook blade on it for spoon and bowl carving, but I cant locate a stainless steel one. The mora ones are all non stainless.
What's wrong with carbon steel?
Nate
I dont like non stainleas blades. The carbon moras i bought all rusted. Plus to be on a sak its needs to be inox for me.
-
Got ya. All of my carbon blades have not rusted. But I keep up on them. I kinda wish Vic would make a high carbon sak.
Nate
-
Poplar spoon carved entirely with my new SAK

-
Damn! Good job!
Nate
-
Thanks Nate
I do have an issue with the blades wanting to bite too deep...convexed secondary bevel. It was manageable, but a bit annoying. I'm thinking about experimenting with a junker knife and seeing if it will handle a full flat grind. -
Makes sence. I know my Opinel carves nicely. Very thin blade and I put a steep edge on it. I would say a full grind on a SAK blade would do wonders.
Nate
-
My concern would be how well it holds up. I'll have to slap together a sacrificial knife to test it out.
-
I would like to know myself. Let us know how it goes.
Nate
-
@Spork, Lord of Lime Jello! said:
Poplar spoon carved entirely with my new SAKAnother wonderful creation

@ducttapetech said:
Makes sence. I know my Opinel carves nicely. Very thin blade and I put a steep edge on it. I would say a full grind on a SAK blade would do wonders.Nate
Nate, I always think of Vic 91mm blade is some kind of FFG, do you mean to have even thinner blade thickness and eliminate the primary bevel?

-
Yes and no. A thinner blade, no. Doing away with the primary bevel, yes. Basically you would sharpen the blade at the same angle as the blade was ground. Kinda like a Mora.
Nate
-
Spoonish spatula thing...I'm calling it a Sploon! :D
Carved with an Ulster Scout knife and a modified Mora 164


-
There is a reference page here Australian Timbers
-
Just for giggles I took a Vic paring knife from the kitchen and started carving a couple of butter spreaders today. I did have to sharpen and strop the edge, but stuck to the original grind. It carved really well, probably due to the thinness of the blade stock.

-
@Spork, Lord of Lime Jello! said:
There is a reference page here Australian Timbers
Was looking for food-friendly Aussie woods, not frame packs.
Still an interesting read. 
-
How did that happen?
...stupid iPad 
try this http://www.daff.qld.gov.au/forestry/using-wood-and-its-benefits/wood-properties-of-timber-trees
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

