pocket clip oblivion
-
Possibly because it will make gripping the tool a bit uncomfortable. Just a guess though.
I do appreciate when Leatherman puts clips on their tools, but its always on the wrong handle.
That's why the Sideclip is awesome. It is on my preferred side. -
+1
I find the best way to carry my mid size MT is pocket carry with clip! -
@captain spaulding said:
Possibly because it will make gripping the tool a bit uncomfortable. Just a guess though.I do appreciate when Leatherman puts clips on their tools, but its always on the wrong handle.
That's why the Sideclip is awesome. It is on my preferred side.Finally found a Sideclip for myself, on its way to me now. This was very appealing to me.
I've got the clip for my wave, and I'll use the clips on the Sidekick and Wingman. For non-clip MTs, I'll use the sleeve that comes with the Sidekick to carry in my pocket, since it keeps them from sliding around. An ok alternative.
-
I put nite ize hip clips on every MT
-
The Sideclip is a great tool and is quite thin making it not noticeable at all when clipped to your pocket.

-
The nite ize clip goes well with both rebar and st300, I have a photo of them somewhere.
-
I'm looking at putting a clip onto a Spirit. Hope I don't smurf that one up.
-
I put nite ize hip clips on every MT
I might need to do this on my Rebar. I'm starting to use it more, wouldn't mind It being more accessible.
PM me your address, I'd take care it for you.
-
@Kampfer said:
The nite ize clip goes well with both rebar and st300, I have a photo of them somewhere.How does that work? Ive seen some kind of clip that you can like super glue to just about anything..... darn infomercials, but I don't really trust adhesive, other than say, liquid nail :D. That stuff sticks to your tools and fingers REAL good
-
@zoidberg said:
I'm looking at putting a clip onto a Spirit. Hope I don't smurf that one up.This wasn't too professional, but I salvaged a clip from a pocket knife and just mounted it through one if the mounting screws on a Gerber Mt. I don't know anything about sak tho, but its was a pretty good red neck mod :D
-
The nite ize clip goes well with both rebar and st300, I have a photo of them somewhere.
How does that work? Ive seen some kind of clip that you can like super glue to just about anything..... darn infomercials, but I don't really trust adhesive, other than say, liquid nail :D. That stuff sticks to your tools and fingers REAL good
It use strong double sided tape, it holds strong enough as long as you cleaned the surface well before applying. I really need to twist and pull and cut the tape when I removed it.
-
Agree 100%.
Leatherman (et al) really needs to design a simple and slim MT that incorporates a clip, alla Sideclip. Something like an "executive" Leatherman; thumb-opening blade, pliers, bottle opener, flathead & phillips.
I too love my Wave but can't wear it to work in a belt pouch. I hacked the carabiner off of a Skeletool and swapped out the standard bit for a double header. It does the job, length is perfect but is too heavy and too thick.
As for adhesive for clips 3M VHB works perfect. I highly recommend.
-
I carry my multitool on a clip often if it comes with one.
I think it should be a option on every multitool
Most don't for some reason.
I have yet to try the niteize clip on multitool but I did stick one on a small knife sheath and it worked well.
-
I'm looking at putting a clip onto a Spirit. Hope I don't smurf that one up.
This wasn't too professional, but I salvaged a clip from a pocket knife and just mounted it through one if the mounting screws on a Gerber Mt. I don't know anything about sak tho, but its was a pretty good red neck mod :D
Going to have to copy you and rig something up.
I like that red neck mod

-
Hack it up man :D
-
Leatherman (et al) really needs to design a simple and slim MT that incorporates a clip, alla Sideclip. Something like an "executive" Leatherman; thumb-opening blade, pliers, bottle opener, flathead & phillips.
I too love my Wave but can't wear it to work in a belt pouch. I hacked the carabiner off of a Skeletool and swapped out the standard bit for a double header. It does the job, length is perfect but is too heavy and too thick.
As for adhesive for clips 3M VHB works perfect. I highly recommend.
the Skeletool has a pocket clip and all the tools you listed, if you allow the bit driver to count for the flat/Phillips drivers. it also weighs in at 5.0 ounces... which is exactly the same weight as the Sideclip. :) not sure why you would hack the carabiner off, since that kills your bottle opener.

if you're looking for an "executive" style MT, I think the Skeletool CX fits the bill nicely. the DLC coating gives it a nice polished look, and the clip allows the tool to ride low enough that it's very inconspicuous in the pocket of a pair of slacks. personally, it's one of my favorite EDC MTs.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login