pocket clip oblivion
-
Leatherman (et al) really needs to design a simple and slim MT that incorporates a clip, alla Sideclip. Something like an "executive" Leatherman; thumb-opening blade, pliers, bottle opener, flathead & phillips.
I too love my Wave but can't wear it to work in a belt pouch. I hacked the carabiner off of a Skeletool and swapped out the standard bit for a double header. It does the job, length is perfect but is too heavy and too thick.
As for adhesive for clips 3M VHB works perfect. I highly recommend.
the Skeletool has a pocket clip and all the tools you listed, if you allow the bit driver to count for the flat/Phillips drivers. it also weighs in at 5.0 ounces... which is exactly the same weight as the Sideclip. :) not sure why you would hack the carabiner off, since that kills your bottle opener.

if you're looking for an "executive" style MT, I think the Skeletool CX fits the bill nicely. the DLC coating gives it a nice polished look, and the clip allows the tool to ride low enough that it's very inconspicuous in the pocket of a pair of slacks. personally, it's one of my favorite EDC MTs.
-
B12, that is an excellent point, i never thought of that.
i love my Skeletool X -
Breezy12, I have the CX and agree it makes a really great EDC.
A few things bother me though. Weight and thickness - just wish it was a bit lighter and a bit thinner. Although I agree that it carries quite low and well in the pocket the top portion of the tool is bulky and sharp. I find myself struggling to access other items in my pocket.
I chopped off the carabiner in order to cut down on weight and, more importantly, the length. I find that often times a dedicated bottle-opener is expendable. The ol' lighter or table top trick suffices when a bottle of suds presents itself.
Still waiting for that EDC that perfectly marries weight, design and function. I'd like to see something similar to the size and weight of the Juice or Style line with an exterior one-handed blade.
Can't have everything though, right?
-
Skinny Charge man!!
-
Skinny Charge?
I've never handled one but I always thought the Charge was around the same size as the Wave, no?
Was thinking more along the lines of something about 3.5" closed and less than 5oz.
-
I put nite ize hip clips on every MT
I might need to do this on my Rebar. I'm starting to use it more, wouldn't mind It being more accessible.
PM me your address, I'd take care it for you.
Sent!
Excellent MTO generosity here! I'll post pics when I get it attached

-
[quote author=Kampfer link=topic=54852.msg955710#msg955710 date=1411936368]
I put nite ize hip clips on every MTI might need to do this on my Rebar. I'm starting to use it more, wouldn't mind It being more accessible.
PM me your address, I'd take care it for you.
Sent!
Excellent MTO generosity here! I'll post pics when I get it attached

[/quote]
Please do. -
Still a work in progress this one:
<a href="https://www.flickr.com/photos/26008756@N08/15122858889/" target="_blank" rel="noopener noreferrer"><img src="https://farm4.staticflickr.com/3874/15122858889_1bb64ee576.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Have made a new pivot for the pliers so i can attach the clip but I'm still waiting for some new metric screws to arrive so I can finish it off. -
@DECO665 said:
Breezy12, I have the CX and agree it makes a really great EDC.A few things bother me though. Weight and thickness - just wish it was a bit lighter and a bit thinner. Although I agree that it carries quite low and well in the pocket the top portion of the tool is bulky and sharp. I find myself struggling to access other items in my pocket.
I chopped off the carabiner in order to cut down on weight and, more importantly, the length. I find that often times a dedicated bottle-opener is expendable. The ol' lighter or table top trick suffices when a bottle of suds presents itself.
Still waiting for that EDC that perfectly marries weight, design and function. I'd like to see something similar to the size and weight of the Juice or Style line with an exterior one-handed blade.
Can't have everything though, right?
DECO665, I thought you were after a full-size (4") tool that meets these requirements, and I was wondering how you'd expect a tool like that to come in anywhere under 5 ounces and still be a strong, durable tool.
I didn't realize you were considering smaller MTs as well.I think someone attached a thumb stud to a Style CS blade to make it OHO... I might need to give that a try, although I also have plans to put a completely different blade on a Style. (I'm not a fan of those chisel-ground blades.)
I've never handled one but I always thought the Charge was around the same size as the Wave, no?
Was thinking more along the lines of something about 3.5" closed and less than 5oz.
Yes, the Charge is the same size as the Wave. I'm pretty sure JBW1 is talking about the Skinny Charge that I modded. It weighs in at 7.3oz, which is a full ounce less than the stock Charge ALX, but it's still significantly heavier than what you're looking for. It's noticeably thinner for pocket carry though.


-
Its better to have too much than not enough

-
@captain spaulding said:
Possibly because it will make gripping the tool a bit uncomfortable. Just a guess though.I do appreciate when Leatherman puts clips on their tools, but its always on the wrong handle.
That's why the Sideclip is awesome. It is on my preferred side.Just thinking, would you be able to flip some tools around and get the gap for the clip to the side you want?
-
Breezy, that Charge is pretty nice. Like it.
Yeah, guess I should've been a little more clear. Also looking for shorter length as well. I think 4" is a little too long. Too big in the pocket. I'm thinking 3.5" is sounding perfect.
I thought of the thumb-stud on the Style as well but agree with your assessment of the blade. Again, the modded Skeletool almost fits the bill. Just too heavy / too thich. It would benefit by a smaller (thinner) set of pliers.
Oh well, the search continues...
-
The Nite Ize clip that Kampfer generously sent to me has been installed. :)


This is a great addition. Holds well with the 3M outdoor tape, and doesn't really affect the grip (if the clip is facing out). After trying it out, seems like a perfect solution to the no-clip problem (I'd add one even if the clip wasn't free ;) ). Thanks again Kampfer!
-
You are welcome!
And one the best part of installing a clip, now you know exactly where each tool is, even with eyes shut. -
Now you know the clip side has your Phillip driver, serrated blade & saw, everything else are on the other side.
-
The Nite-ize clip looks good.
The replacement screws have arrived for my Rebar pocket clip mod - I'll get some pics up tomorrow. -
@DECO665 said:
Leatherman (et al) really needs to design a simple and slim MT that incorporates a clip, alla Sideclip. Something like an "executive" Leatherman; thumb-opening blade, pliers, bottle opener, flathead & phillips.Here is a topic on Skeletool vs Sideclip.
I agree with Bob, other that classic vs modern appearance, two tools have identical tool selection, Sideclip offers no advantage over Skeletool, Skeletool in knife mode beats Sideclip by a mile.
</topic/3851
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login