Official 30-Day Minimalist SAK Challenge!
-
Good day for the Pioneer today: slicing kiwis, opening boxes, putting together racking and chairs at work and (carefully) cutting some thin copper cable.
-
Sportsman used to open a package with a Hunter and a Helmsman that are going to stay locked in a drawer until the end of the month!!!!

-
Used the SI to cut bread and cheese on a rainy trip to Glastonbury today.
-
Fail!!! Had to lace a new spoke on a friend's bike and couldn't take the cassette off so I needed to work it over the cog. I couldn't do it without needlenose pliers so the sidekick got the nod

-

The mighty Pioneer :) -
@Higgins617 said:
Fail!!! Had to lace a new spoke on a friend's bike and couldn't take the cassette off so I needed to work it over the cog. I couldn't do it without needlenose pliers so the sidekick got the nod
You should have left the job to your friend
... what are friends for? 

-
My friends aren't exactly what you could call mechanically inclined. Being at college just makes it worse, who brings tools to college(besides me)
-
@Higgins617 said:
My friends aren't exactly what you could call mechanically inclined. Being at college just makes it worse, who brings tools to college(besides me)A janitor ...


-
@Higgins617 said:
My friends aren't exactly what you could call mechanically inclined. Being at college just makes it worse, who brings tools to college(besides me)Sounds like my work

-
@arizonaranchman said:

The mighty Pioneer :)Cool pic AZR!!!
-

The mighty Pioneer :)Cool pic AZR!!!
+1
-
The Compact's combo opener tool came in handy a couple times today while working at our house. It scraped some stickers off a few new windows after installation and it was used to pry a small curtain rod bracket thing from a piece of the trim around said window. I started the pry job with the end of it, then used it in the same manner as a cap lifter to "pop" the bracket off the rest of the way. It actually worked rather well. This is something for which I would have normally resorted to my MT flathead/pliers, so it's cool to find creative ways around that

-
Day thirteen, my three year old managed to break the front panel completely off of a drawer in the kitchen. Unscrewed a few Phillips screws in order to remove a board that is stapled into the drawer itself that keeps the panel on the front. The panel is ok, and can be reused. The secondary board is shot. Off to Home Depot tomorrow!
Removed a tag from a blanket, for my son, with the scissors, and opened a few packages today with the blade.
-
-
Looks yummy!!

-
Really glad I bailed out of this. Had more reinfocement today that having a wide range of tools is a very wise move. Today's fiasco was that the car wouldn't start! I knew I'd got an issue with the distributor from a similar occurence at the weekend. Ended up borrowing a mates car to go and get a new dizzie cap, but couldn't get a rotor arm from stock anywhere so I decided to just try replacing the cap and see if that worked
However, the three screws holding the cap on proved to be a problem. My sockets are imperial, and the car is Japanese ... my screwdrivers were either too long or too bulky for the job. To make the whole experience more entertaining, it was pissing down too. The only way I could drive the screws with my dedicated tools was by setting the socket set up to drive 1/4" and using a Phillips bit. Of course, not being magnetic, the bit kept dropping out and disappearing into the ever growing puddles of rain under the car, but no other dedicated tools in my toolset were suitable alternatives ....
The knifeless MP400 in my pocket was just a little too clumsy for this particular role, and I didn't have a SAK in my pocket today. There was only one other tool in the car which was capable of getting in to where it needed - the Core that lives in the glove compartment. Pop out one of the arms at 90 degrees, and Robert's your aunties live in lover! Still an awkward job, but now least the car is back running again thanks to a pliers based multitool.
A minimalist SAK wouldn't have been able to help with that job, except *possibly *a Scientist, which *might *have been slim enough to get in the required spaces. I think I might switch the Wenger Toolchest that resides with the Core for a Cybertool as that might possibly have been slightly easier to use with the driver arm out at 90 degrees.
Just charging the phone now, and then I'll take it for a run just to be sure I've cured it
-
@50ft-trad said:
Really glad I bailed out of this. Had more reinfocement today that having a wide range of tools is a very wise move. Today's fiasco was that the car wouldn't start! I knew I'd got an issue with the distributor from a similar occurence at the weekend. Ended up borrowing a mates car to go and get a new dizzie cap, but couldn't get a rotor arm from stock anywhere so I decided to just try replacing the cap and see if that workedHowever, the three screws holding the cap on proved to be a problem. My sockets are imperial, and the car is Japanese ... my screwdrivers were either too long or too bulky for the job. To make the whole experience more entertaining, it was pissing down too. The only way I could drive the screws with my dedicated tools was by setting the socket set up to drive 1/4" and using a Phillips bit. Of course, not being magnetic, the bit kept dropping out and disappearing into the ever growing puddles of rain under the car, but no other dedicated tools in my toolset were suitable alternatives ....
The knifeless MP400 in my pocket was just a little too clumsy for this particular role, and I didn't have a SAK in my pocket today. There was only one other tool in the car which was capable of getting in to where it needed - the Core that lives in the glove compartment. Pop out one of the arms at 90 degrees, and Robert's your aunties live in lover! Still an awkward job, but now least the car is back running again thanks to a pliers based multitool.
A minimalist SAK wouldn't have been able to help with that job, except *possibly *a Scientist, which *might *have been slim enough to get in the required spaces. I think I might switch the Wenger Toolchest that resides with the Core for a Cybertool as that might possibly have been slightly easier to use with the driver arm out at 90 degrees.
Just charging the phone now, and then I'll take it for a run just to be sure I've cured it
Glad you got it running, where you just trying to fix it with a Sak or MT or do you carry dedicated tools in the car ?
Sak's rule !
-
I caved today, officially out !!

Good luck you guys !
Sak's rule !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





