Wave improvment idea?
-
@HarleyXJGuy said:
So with the Wave head it is a simple swap for the Wave scissors on a Rebar? Which tool did you replace the scissors with? Also are there other options as to which tool to take off?Will be buying a Wave soon from JAMan so it would be no issue to pick up a rebar too. Hmm so many options for these tools.
Kampfer wanted the Rebar awl in the Wave in place of the scissors, so it was a straight swap of those two tools when I modded the Mini Surge for him.
Placement is key when you're putting the tools back in the handle. ;) I put the scissors over on one side by the file (if I remember correcly), but sometimes you need to play around with the placement until you get it right by trial and error. also, not all the tools are exactly the same thickness, so you may need to add or remove spacers/washers to suit your needs.
that being said, be sure to post in the Mod Squad forum if you run into any troubles... there are plenty of modders around here who are happy to help with advice and/or pics.

-
Thanks, but one that has to be obeyed is enough. :D
-
@Lichtbote said:
Thanks, but one that has to be obeyed is enough. :DYou could send TD yours

-

please don't (one woman is more than enough thank you very much ! but I have 2 daughters as well :'() -
tightly packed ? less 'space' !
-
@HarleyXJGuy said:
I read somewhere here and it seems accurate that the MP 600 I have is like the AK-47 vs the Wave AR-15.Bought a Wave from Joel and I am very sure I will like it. Now I am thinking it is close to the MP 600 in size and weight so maybe I need something different. Maybe something a little smaller or just go full on tool box style giant tool.
Going to send some extra bits along with the wave.
I wish i had some mut bits.
I did have a spare but holder but lost it.
I'm going to try rig him up some sort of kit.
-
@HarleyXJGuy said:
I read somewhere here and it seems accurate that the MP 600 I have is like the AK-47 vs the Wave AR-15.Bought a Wave from Joel and I am very sure I will like it. Now I am thinking it is close to the MP 600 in size and weight so maybe I need something different. Maybe something a little smaller or just go full on tool box style giant tool.
Check out the Gerber FLIK, I'm interested in getting one because of the outside accessible tools, like the wave, but seems smaller than the 600 ?? Not sure tho, or how about the Gerber diesel?
-
I think the problem there is no tool that has everything I want. Well the Surge has all the tools I want but it comes in at 12oz before you factor in extra blades and bits.
Which might work, I mean it is only 3oz more then the MP 600 I carry now. With my wilderness belt with insert I don't even notice the weight of the Gerber.

-
Forgot about the aptly named bit extender when I made this thread.
Another route could be the often overlooked bit adapter. For that you need the 3D Phillips tool. Incorporating that would be my #1 Wave improvement.
Not sure about this gentlemen, but I'm planning in trying something. I recently ground down this bit driver on a bench Grinder to hold a rat tail file, and it got me thinking about doing the same for a longer screwdriver bit. Instead of replacing the oe LM bit holder..... clear as mud?? Sorry :D
.jpg)
-
@HarleyXJGuy said:
I think the problem there is no tool that has everything I want. Well the Surge has all the tools I want but it comes in at 12oz before you factor in extra blades and bits.Which might work, I mean it is only 3oz more then the MP 600 I carry now. With my wilderness belt with insert I don't even notice the weight of the Gerber.

Better to much than not enough man :D, besides you'll just have one leg stronger than the other. I Carry my charge every day in my pocket via pocket clip
-
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-10-14202837_zps65614216.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-10-14202837_zps65614216.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Some sort of kit
-
@JAfromMn said:
<a href="http://s1211.photobucket.com/user/JAfromMn/media/Mobile Uploads/2014-10-14202837_zps65614216.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1211.photobucket.com/albums/cc421/JAfromMn/Mobile Uploads/2014-10-14202837_zps65614216.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Some sort of kit
Are u able to close it with the bit extender??
-
Forgot about the aptly named bit extender when I made this thread.
Another route could be the often overlooked bit adapter. For that you need the 3D Phillips tool. Incorporating that would be my #1 Wave improvement.
Not sure about this gentlemen, but I'm planning in trying something. I recently ground down this bit driver on a bench Grinder to hold a rat tail file, and it got me thinking about doing the same for a longer screwdriver bit. Instead of replacing the oe LM bit holder..... clear as mud?? Sorry :D
We get you.

<a href="https://flic.kr/p/deeWsj" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8320/8026115302_e594b1e1f1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I think the problem there is no tool that has everything I want. Well the Surge has all the tools I want but it comes in at 12oz before you factor in extra blades and bits.
Which might work, I mean it is only 3oz more then the MP 600 I carry now. With my wilderness belt with insert I don't even notice the weight of the Gerber.

Better to much than not enough man :D, besides you'll just have one leg stronger than the other. I Carry my charge every day in my pocket via pocket clip
I wouldn't compare the two. ;)
-
I think the problem there is no tool that has everything I want. Well the Surge has all the tools I want but it comes in at 12oz before you factor in extra blades and bits.
Which might work, I mean it is only 3oz more then the MP 600 I carry now. With my wilderness belt with insert I don't even notice the weight of the Gerber.

Better to much than not enough man :D, besides you'll just have one leg stronger than the other. I Carry my charge every day in my pocket via pocket clip
I wouldn't compare the two. ;)
Nah its more like the wave is what I was getting at, sorry, two separate thoughts
-
:
Forgot about the aptly named bit extender when I made this thread.
Another route could be the often overlooked bit adapter. For that you need the 3D Phillips tool. Incorporating that would be my #1 Wave improvement.
Not sure about this gentlemen, but I'm planning in trying something. I recently ground down this bit driver on a bench Grinder to hold a rat tail file, and it got me thinking about doing the same for a longer screwdriver bit. Instead of replacing the oe LM bit holder..... clear as mud?? Sorry :D
We get you.

<a href="https://flic.kr/p/deeWsj" target="_blank" rel="noopener noreferrer"><img src="https://farm9.staticflickr.com/8320/8026115302_e594b1e1f1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Ok, but instead of modding all these bit holders to hold round bits, why not just mod the bits themselves?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login