Skinth Loadout Thread!
-
Once I got a gun belt, AKA a duty belt, everything carries like a champ with no sag at all. Last night I went to a friends with my Skinth 2 XL loaded up, my IWB holster and larger/heavy-ish folder on me and nobody was the wiser. Love it.
Any recommendations for a duty belt? I'd prefer something I can wear with jeans or cargo/khakis (do they come in leather?)?
Yes, leather belts. Just made to be rugged, with dual-layer bullhide.This is the particular model I chose, but they have a variety of styles.
http://www.thebeltman.net/bh112.htm
If you do get one, I recommend you choose the 7 holes 3/4" apart, rather than 5 holes at 1" apart. It will give you more options to find your comfort zone.
They're not cheap, but then they're not built cheap either. They're handmade dual layer and tough as hell. This is a belt that will last, that's for sure.
Good luck!
-
Ok as I got my surge back this morning I'm playing about with load outs.

Here the beast all closed up, I like the lamy pens, they write very well but I wouldn't be too upset if I lost one, the CRKT TAO pen was the one I won in the giveaway sometime ago. The fastex buckles I prefer over Velcro as if they wear out or break they are easier to replace. Also once they are closed you can't snag it on anything and have it open.

I went for the Molle attachment as my main back packs have Molle on them. The Velcro vertical carry will be useful on my small day sack/assault pack that I use when I out shooting.

This is what is in/on it so far, the tin is the same size as the altoids tin and that will have a small FAK in it. I'm also hunting for a flashlight that will fit as well.
Updates as it changes chaps

-
I like the looks of that one. And I hate it when velcro dies. Time to start a skinth fund eh.
-
My og.
Guess I should've asked before I ordered.
But do you think the molle attachment would play nicely on a first responder for belt carry ?
Should've asked Eric if he could do Velcro backing in my comments.




-
Is that a Maglite clip on the Leatherman bit extender? Maybe a clip from a writing pen?

-
@captain spaulding said:
Is that a Maglite clip on the Leatherman bit extender? Maybe a clip from a writing pen?
You can add Space Pen pocket clip. It works beautifully with the LB bit extender and attaches to the wider part at the top. Done it myself, works like a charm. It can also be ordered as a separate part so no need to take it off the Bullet pen.
-
Thanks.
-
@captain spaulding said:
Is that a Maglite clip on the Leatherman bit extender? Maybe a clip from a writing pen?
It's a clip from a cheap Staples 'liquid pencil'. I only bought them for the clips the pencil is rubbish
-

PST with NiteIze clip
True Utility Scixors
Cricket disposable lighter in metal cover
Fenix E11
Victorinox Standard
Inka Pen
-
Thought you might recognise it :D
-
If I'm honest, I find the Scixors to be the weak link in the chain. I have found several True Utility items to be quite useful, but these vex me a little. I find them slipping sideways in my fingers then "leaping" out of my hands - not as badly as the Gerber Solstice though - that's EVIL - don't ever get one of those if you prefer to keep your blood inside your skin!! :ahhh :ahhh
I've only worn this kit occasionally to be honest, and I'm persevering with them in case it's more operator error than a characteristic of the tool :D, but if I don't master them I might end up switching the Standard for a Compact or Timekeeper unless I find some other small scissors, and maybe stick some small nail clippers in the scixors space instead
The Standard will still get carry time though even if the scixors get the better of me, as it can pair up with my modded Kick or MP400, which both have scissors anyway. The other items have done very well though, and I think this is probably the best overall set up that I've used the Skinth for
I'm actually getting on better with the PST than I thought I would, and the E11 is an excellent little light. I've got a lot of function in that kit, and it's one of the very few set ups that I'll actually belt carry rather than pocket carry 
-
Pics of my final load out (Skinth CatchAll). Details in my EDC thread (link under my sig)



9.4.1. Skinth CatchAll
9.4.1.1. Spyderco Endura VG10 FFG
9.4.1.2. Victorinox Swisschamp XLT Ruby (Alt Swisschamp or Juice Pro)
9.4.1.3. Victorinox Watchmaker Pallas
9.4.1.4. Victorinox Swisstool Spirit S (Alt Swisstool)
9.4.1.5. Leatherman Charge TTi (Alt Surge)
9.4.1.6. Leatherman Crunch (Alt Opinel #8 Couteau de Jardin)
9.4.1.7. Leatherman Bitsets x2
9.4.1.8. Hex 6mm Bitset (11 bits)
9.4.1.9. Hex 6mm custom adapter for Victorinox Philips driver
9.4.1.10. Leatherman Bit Extender
9.4.1.11. Powertool Bit Holder
9.4.1.12. Victorinox Ratchet
9.4.1.13. PocketWrench II
9.4.1.14. MiniMagLite LED
9.4.1.15. Spare AAA Battery
9.4.1.16. Victorinox Compass/Thermometer/Ruler/Magnifying Lens
9.4.1.17. Victorinox Metal Clip
9.4.1.18. Victorinox Lanyard
9.4.1.19. Red Cord Lanyard
9.4.1.20. Bic Lighter
9.4.1.21. Victorinox Dual Sharpener
9.4.1.22. Diamond File Sharpener
9.4.1.23. Victorinox Stone Sharpener
9.4.1.24. Big Paperclips
9.4.1.25. Small Paperclips
9.4.1.26. Metal Bookmarks
9.4.1.27. Victorinox Mechanical Pencil
9.4.1.28. IKEA Pencil
9.4.1.29. IKEA measuring tape
9.4.1.30. Ballpoint Pen
9.4.1.31. Victorinox 4mm Bitset
9.4.1.32. Spare pair of Victorinox TnT
9.4.1.33. Surgical Blades (4)
9.4.1.34. Victorinox Nylon Cord
9.4.1.35. Sewing Kit (2 hotel kits combined)
9.4.1.36. Sacking and Leather Needles (4)
9.4.1.37. Button LED Light
9.4.1.38. Alcohol Pads
9.4.1.39. Bandages
9.4.1.40. Rubber Bands
9.4.1.41. Tweezers
9.4.1.42. Blue Tak
9.4.1.43. Powerstrips
9.4.1.44. Miscellaneous pieces -
That is a one Motherload of a Skinth load
! -
@kkokkolis said:
Pics of my final load out (Skinth CatchAll). Details in my EDC thread (link under my sig)


9.4.1. Skinth CatchAll
9.4.1.1. Spyderco Endura VG10 FFG
9.4.1.2. Victorinox Swisschamp XLT Ruby (Alt Swisschamp or Juice Pro)
9.4.1.3. Victorinox Watchmaker Pallas
9.4.1.4. Victorinox Swisstool Spirit S (Alt Swisstool)
9.4.1.5. Leatherman Charge TTi (Alt Surge)
9.4.1.6. Leatherman Crunch (Alt Opinel #8 Couteau de Jardin)
9.4.1.7. Leatherman Bitsets x2
9.4.1.8. Hex 6mm Bitset (11 bits)
9.4.1.9. Hex 6mm custom adapter for Victorinox Philips driver
9.4.1.10. Leatherman Bit Extender
9.4.1.11. Powertool Bit Holder
9.4.1.12. Victorinox Ratchet
9.4.1.13. PocketWrench II
9.4.1.14. MiniMagLite LED
9.4.1.15. Spare AAA Battery
9.4.1.16. Victorinox Compass/Thermometer/Ruler/Magnifying Lens
9.4.1.17. Victorinox Metal Clip
9.4.1.18. Victorinox Lanyard
9.4.1.19. Red Cord Lanyard
9.4.1.20. Bic Lighter
9.4.1.21. Victorinox Dual Sharpener
9.4.1.22. Diamond File Sharpener
9.4.1.23. Victorinox Stone Sharpener
9.4.1.24. Big Paperclips
9.4.1.25. Small Paperclips
9.4.1.26. Metal Bookmarks
9.4.1.27. Victorinox Mechanical Pencil
9.4.1.28. IKEA Pencil
9.4.1.29. IKEA measuring tape
9.4.1.30. Ballpoint Pen
9.4.1.31. Victorinox 4mm Bitset
9.4.1.32. Spare pair of Victorinox TnT
9.4.1.33. Surgical Blades (4)
9.4.1.34. Victorinox Nylon Cord
9.4.1.35. Sewing Kit (2 hotel kits combined)
9.4.1.36. Sacking and Leather Needles (4)
9.4.1.37. Button LED Light
9.4.1.38. Alcohol Pads
9.4.1.39. Bandages
9.4.1.40. Rubber Bands
9.4.1.41. Tweezers
9.4.1.42. Blue Tak
9.4.1.43. Powerstrips
9.4.1.44. Miscellaneous piecesHoly mother of Smurf! I like it :ahhh

-
Thanks. I like it too, that's why the show off.
-
I am about to buy a skinth sheath. I have many MTs and want the most versatile sheath. I have Wave, Surge, ST300, Charge, MUT,
MP600 (needle nose), SwissTool X. Etc.What would you recommend that could carry all of these (not at same time) From the looks of it I was
thinking the MUT shield would be big enough to support all my tools. I know it would leave the
smaller tools with a little bit of play but that is okay.Please let me know.
-AdmSlc
-
@kkokkolis said:
Thanks. I like it too, that's why the show off.What's the weight?
-
Thanks. I like it too, that's why the show off.
What's the weight?
1.85 kgr. Really.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login