mp 600 takedown question
-
I'd offer to do it, but you might just end up with a bag of parts back!! :ahhh Tear into my Jeep: Yes Tear into a Gerber: No

-
@scattergun13 said:
I need someone to do this mod for me or I will screw it up. If I can't drive it or shoot it, I WILL mess it up. Anyone interested in helping out? Maybe for a trade of some sort.....Father?Stew
What are you looking to do? Trust me Stew, if it doesn't have a firing pin, I usually can't get it apart and together again either. But the only problem I ran into with the MP was that my hands shake a little, thanks to some youthful stupidity. Made the washers a bit difficult to get into the correct position, but I managed it.
</topic/53786
-
I just installed a saw and coupler from a scout in a BO BN 600. Thanks to you guys, Joel and the Captain, it came out perfectly. I love this thing now. Got rid of that serrated blade and that useless lanyard ring. My new truck multi.
Stew...

-
Sweet!
Gonna need pics of it Stew.Nate
-
@ducttapetech said:
Sweet!
Gonna need pics of it Stew.Nate
Yes Sir. I'll try to get them posted from my office tomorrow. Thanks all for the advice.
Stew
-
@scattergun13 said:
I just installed a saw and coupler from a scout in a BO BL 600. Thanks to you guys, Joel and the Captain, it came out perfectly. I love this thing now. Got rid of that serrated blade and that useless lanyard ring. My new truck multi.Stew...

Told you it was easy. ;) Glad it came out well. You did make sure to put the washers in correctly right?
-
I couldn't wait, so here it is fellas. It's not on par with the mods that you all do, but for my first one, it got the BN 600 exactly where I wanted it to be. No change in the flickability whatsoever. I'm pleased with the outcome. Thanks all.
Stew

-
@captain spaulding said:
I just installed a saw and coupler from a scout in a BO BL 600. Thanks to you guys, Joel and the Captain, it came out perfectly. I love this thing now. Got rid of that serrated blade and that useless lanyard ring. My new truck multi.
Stew...

Told you it was easy. ;) Glad it came out well. You did make sure to put the washers in correctly right?
Yes Sir I did but in the interest of transparency Captain. I scavenged the coupler from the beat up 600 you sent me. It remains functional and sets on my desk as a display piece but i did use the coupler from it. Hope you're not pissed.

Stew
-
Nice job Scatty
Those Remgrit saw's can't do what most multitool saws can, but they can do a lot of cutting on stuff the others can't touch. If you ever lose you're handcuff keys, you're sorted now
:P -
I also found a brand new blue/black 600 pro scout and a brand new stainless 600 pro scout, both with sheaths on e-bay yesterday. I happily paid $60.00 for both since they are brand new in sheath and the blue one is rare. Do you think I got burned?
Stew
-
I need someone to do this mod for me or I will screw it up. If I can't drive it or shoot it, I WILL mess it up. Anyone interested in helping out? Maybe for a trade of some sort.....Father?
Stew
What are you looking to do? Trust me Stew, if it doesn't have a firing pin, I usually can't get it apart and together again either. But the only problem I ran into with the MP was that my hands shake a little, thanks to some youthful stupidity. Made the washers a bit difficult to get into the correct position, but I managed it.
</topic/53786
Those washers are pretty awful to keep in place and line up, and I'm not too shaky .....YET
-
@50ft-trad said:
Nice job Scatty
Those Remgrit saw's can't do what most multitool saws can, but they can do a lot of cutting on stuff the others can't touch. If you ever lose you're handcuff keys, you're sorted now
:PGreat idea. I have this thing, once I put cuffs on, it's because I damn well meant to. I'm not taking them off, that's what rookies are for. Now if I accidentally can't get them off of Kat, well that's another story. I may have to summon the good Captain or Derekmac for some help. They'll have my back, I'm sure.

Stew...
-
@50ft-trad said:
Nice job Scatty
Those Remgrit saw's can't do what most multitool saws can, but they can do a lot of cutting on stuff the others can't touch. If you ever lose you're handcuff keys, you're sorted now
:PGreat idea. I have this thing, once I put cuffs on, it's because I damn well meant to. I'm not taking them off, that's what rookies are for. Now if I accidentally can't get them off of Kat, well that's another story. I may have to summon the good Captain or Derekmac for some help. They'll have my back, I'm sure.

Stew...
"Sit's not so patiently waiting for a help rescue message to come through"

-
@captain spaulding said:
I just installed a saw and coupler from a scout in a BO BL 600. Thanks to you guys, Joel and the Captain, it came out perfectly. I love this thing now. Got rid of that serrated blade and that useless lanyard ring. My new truck multi.
Stew...

Told you it was easy. ;) Glad it came out well. You did make sure to put the washers in correctly right?
Yes Sir I did but in the interest of transparency Captain. I scavenged the coupler from the beat up 600 you sent me. It remains functional and sets on my desk as a display piece but i did use the coupler from it. Hope you're not pissed.

Stew
Not pissed at all.

-
I'm also considering doing a bit of Dremel work on the fitting end of the saw blade so that I can invert it in the tool. This will give me more clearance when using it. Since it is Rem Grit it shouldn't pose a safety risk and should still fit fine. Just a thought...

-
@scattergun13 said:
I also found a brand new blue/black 600 pro scout and a brand new stainless 600 pro scout, both with sheaths on e-bay yesterday. I happily paid $60.00 for both since they are brand new in sheath and the blue one is rare. Do you think I got burned?Stew
That was a bargain, I would have happily paid over $60 just for the blue one (I've been looking for one in good shape for ages, the one I have is a bit worn and scruffy looking). Well done !

-
I also found a brand new blue/black 600 pro scout and a brand new stainless 600 pro scout, both with sheaths on e-bay yesterday. I happily paid $60.00 for both since they are brand new in sheath and the blue one is rare. Do you think I got burned?
Stew
That was a bargain, I would have happily paid over $60 just for the blue one (I've been looking for one in good shape for ages, the one I have is a bit worn and scruffy looking). Well done !

That makes me feel a lot better. Thanks for the input. The blue one didn't have a mark on it, neither did the other one for that matter. I thought it was fair for both, new with sheaths. I've bought 6 pro scouts in the last 48 hours. I think I need an intervention. :ahhh As soon as the sellers post went up he started the bid at $30.00 with 5 days to go. I messaged him and offered $60.00 for a buy it now price if he would change the listing. It was all done in 3 minutes.
Stew
-
@scattergun13 said:
I'm also considering doing a bit of Dremel work on the fitting end of the saw blade so that I can invert it in the tool. This will give me more clearance when using it. Since it is Rem Grit it shouldn't pose a safety risk and should still fit fine. Just a thought...
Hmm, that would mean all the pressure is on the locking mechanism, which is not probably not designed for that sort of stress. Maybe not a huge safety issue with a remgrit blade, but with any saw blade that has sharp teeth it definitely could cause injuries if it lets go under pressure (not to mention whatever is being cut).
-
I'm also considering doing a bit of Dremel work on the fitting end of the saw blade so that I can invert it in the tool. This will give me more clearance when using it. Since it is Rem Grit it shouldn't pose a safety risk and should still fit fine. Just a thought...

Hmm, that would mean all the pressure is on the locking mechanism, which is not probably not designed for that sort of stress. Maybe not a huge safety issue with a remgrit blade, but with any saw blade that has sharp teeth it definitely could cause injuries if it lets go under pressure (not to mention whatever is being cut).
I think you're right. I'll just be happy with it as is. Thanks again.

Stew
-
Nice work on the mod Stew.
Nate
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login